if you dont like amc --mixing ford and chevy this thread is not for you - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scot 6 feet eleven · 06-22-2011, 01:17 PM

heres my new project ---- i had a left over cab , i wanted to use so ... my dad was junking his 97 crown vic police interceptor so im using that chassis and some 24 inch lexanis ---- im sorry if you dont like mixing ford and chevy , this might be my 1st project that will be worth more than what i spend
cab free i had it from a parts truck
97 cop car 350.00 ran and drove
lexanis 24 inch wheels and tires 500.00
adapters for wheels 120.00
and about 30 sawzall blades so far
1950 gmc box 50.00

jimmydean · 06-22-2011, 01:33 PM

Looks like a cool project!

awbrown · 06-22-2011, 08:08 PM

I could see using a 9 inch rear , or maybe a radio , or a seat ... BUt Scott , you are one sick man ........Good luck , cant wait to see it run .. lol

countrybiggen · 06-23-2011, 04:59 AM

I can really say that this one bad A$$ looking ride so far dude. What kinda of dog house are you going to put on it ?

fryer1979 · 06-23-2011, 05:10 AM

Hey, I'm all for mix and match projects....helps keep thing interesting. I'm going to put an Olds 350 in my Chevy truck, and if I can't find a good Pontiac 455 for my '79 Z28, it is likely to get the Ford 429 I have sitting in my buddy's garage..... I really dig where your head is at. It'll be cool to see this one come together.

scot 6 feet eleven · 06-28-2011, 09:23 AM

i took it apart last night --

need to modify the frame where the 24's rub ,,theres a dumb 90 degree kick out behind the wheels so im modifing that --- sand blast the bottom of the cab --- its tipped on its back right now on wheels -- then ill brush on some eastwood rust converter-- under coat it -- then work on the fire wall clean it up ==paint the fire wall --and interior then i can start to go back together --i have like 40 lbs of wire---harness to plug back in --- yikes

SulphuriousSam · 06-28-2011, 10:35 AM

I'm liking the looks of this already

Can you tell me what's going on with the chopped hood though?

jchav62 · 06-28-2011, 10:43 AM

Looks like a cool project!! Can't wait to see it progress...

scot 6 feet eleven · 06-28-2011, 12:10 PM

i wanted the open wheel look i wasnt gonan have a hood, but the 4.6 is ugly to look at so i got a hood and it hits on the eges of the tires so i thought it would look cool to cut it up, i need to make it flip forward --ill weld some metal in to put a edge on it to make it look more finished---this will def be different thats for sure

SulphuriousSam · 06-28-2011, 12:13 PM

Quote:

Originally Posted by scot 6 feet eleven

i wanted the open wheel look i wasnt gonan have a hood, but the 4.6 is ugly to look at so i got a hood and it hits on the eges of the tires so i thought it would look cool to cut it up, i need to make it flip forward --ill weld some metal in to put a edge on it to make it look more finished---this will def be different thats for sure

Cool, I had a feeling you were going to say that, I just wanted to be sure. Nice progress so far and I'm sure it will be a slick ride when you get her all done.

monolith · 06-28-2011, 05:06 PM

Insane, and I LOVE it!

1Bad62Pro/Street · 07-04-2011, 11:57 AM

Quote:

Originally Posted by scot 6 feet eleven

heres my new project ---- i had a left over cab , i wanted to use so ... my dad was junking his 97 crown vic police interceptor so im using that chassis and some 24 inch lexanis ---- im sorry if you dont like mixing ford and chevy , this might be my 1st project that will be worth more than what i spend
cab free i had it from a parts truck
97 cop car 350.00 ran and drove
lexanis 24 inch wheels and tires 500.00
adapters for wheels 120.00
and about 30 sawzall blades so far
1950 gmc box 50.00

Nice!
By the way....
I have a Ford Mustang II IFS and a Ford 9" Rear End set up in my truck!
I got yo back!
The 1997 Ford Crown Victoria Police Interceptor is not bad.
Engine:
4.6 L Modular V8
Transmission:
4-speed AOD/AOD-E automatic
4-speed 4R70W automatic
Rear Axle Ratio: 3.27
Wheelbase: 114.4 in (2,906 mm)
Length: 1995–97: 212.0 in (5,385 mm)
Width: 77.8 in (1,976 mm)
Height: 1995–97: 56.8 in (1,443 mm)

Where is the AMC?

http://theamcforum.com/forum/lets-se...opic23632.html

Keep us posted!

scot 6 feet eleven · 07-05-2011, 08:57 AM

to be a true amc i need something dodge-- maybe a hood ornament? lol

1Bad62Pro/Street · 07-05-2011, 09:15 AM

Quote:

Originally Posted by scot 6 feet eleven

to be a true amc i need something dodge-- maybe a hood ornament? lol

Here you go!
http://www.discounthoodornaments.com/
Posted via Mobile Device

chad64chevy · 07-05-2011, 08:51 PM

thats gonna be sick!

scot 6 feet eleven · 07-07-2011, 10:51 PM

floor is cleaned up welded up- rust inhibitor brusehd on -- undercoated

frame was modified so the 24's no longer rub

06-22-2011, 01:17 PM	#1
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	if you dont like amc --mixing ford and chevy this thread is not for you heres my new project ---- i had a left over cab , i wanted to use so ... my dad was junking his 97 crown vic police interceptor so im using that chassis and some 24 inch lexanis ---- im sorry if you dont like mixing ford and chevy , this might be my 1st project that will be worth more than what i spend cab free i had it from a parts truck 97 cop car 350.00 ran and drove lexanis 24 inch wheels and tires 500.00 adapters for wheels 120.00 and about 30 sawzall blades so far 1950 gmc box 50.00 Attached Images

06-22-2011, 01:33 PM	#2
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: if you dont like amc --mixing ford and chevy this thread is not for you Looks like a cool project! __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

06-22-2011, 08:08 PM	#3
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: if you dont like amc --mixing ford and chevy this thread is not for you I could see using a 9 inch rear , or maybe a radio , or a seat ... BUt Scott , you are one sick man ........Good luck , cant wait to see it run .. lol

06-23-2011, 04:59 AM	#4
countrybiggen Registered User Join Date: Jun 2011 Location: Fairbanks,AK Posts: 14	Re: if you dont like amc --mixing ford and chevy this thread is not for you I can really say that this one bad A$$ looking ride so far dude. What kinda of dog house are you going to put on it ? __________________ COUNTRY BIGGEN 1974 Nova numbers matching (wedding gift) V-8 of course 1963 or 62 Chevy or GMC stepside with the 305 V-6 in it and it was FREE and my 2010 2500 Dodge with the HEMI 4X4 AMERICAN MUSCLE ONLY

06-23-2011, 05:10 AM	#5
fryer1979 Redneck Hillbilly Join Date: Jan 2010 Location: Backwoods Posts: 1,307	Re: if you dont like amc --mixing ford and chevy this thread is not for you Hey, I'm all for mix and match projects....helps keep thing interesting. I'm going to put an Olds 350 in my Chevy truck, and if I can't find a good Pontiac 455 for my '79 Z28, it is likely to get the Ford 429 I have sitting in my buddy's garage..... I really dig where your head is at. It'll be cool to see this one come together.

06-28-2011, 09:23 AM	#6
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: if you dont like amc --mixing ford and chevy this thread is not for you i took it apart last night -- need to modify the frame where the 24's rub ,,theres a dumb 90 degree kick out behind the wheels so im modifing that --- sand blast the bottom of the cab --- its tipped on its back right now on wheels -- then ill brush on some eastwood rust converter-- under coat it -- then work on the fire wall clean it up ==paint the fire wall --and interior then i can start to go back together --i have like 40 lbs of wire---harness to plug back in --- yikes Attached Images

06-28-2011, 10:35 AM	#7
SulphuriousSam Registered User Join Date: Apr 2011 Location: Sulphur, OK Posts: 316	Re: if you dont like amc --mixing ford and chevy this thread is not for you I'm liking the looks of this already Can you tell me what's going on with the chopped hood though? __________________ 1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride)

06-28-2011, 10:43 AM	#8
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: if you dont like amc --mixing ford and chevy this thread is not for you Looks like a cool project!! Can't wait to see it progress... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

06-28-2011, 12:10 PM	#9
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: if you dont like amc --mixing ford and chevy this thread is not for you i wanted the open wheel look i wasnt gonan have a hood, but the 4.6 is ugly to look at so i got a hood and it hits on the eges of the tires so i thought it would look cool to cut it up, i need to make it flip forward --ill weld some metal in to put a edge on it to make it look more finished---this will def be different thats for sure

06-28-2011, 05:06 PM	#11
monolith Zero Albedo Join Date: Mar 2009 Location: San Gabriel, California Posts: 478	Re: if you dont like amc --mixing ford and chevy this thread is not for you Insane, and I LOVE it! __________________ Baz "Deserve's got nothin' to do with it." 66 GMC 1500 wideside longbed 250 4spd "Project Rekker"http://67-72chevytrucks.com/vboard/s...d.php?t=467467 65 GMC 1Ton Panelhttp://67-72chevytrucks.com/vboard/s...32#post4794432 65 Chevy Panel (former U.S.Navy truck) 64 Chevy Suburban Carryall 4x4http://67-72chevytrucks.com/vboard/s...d.php?t=358348 64 GMC 1000 wideside longbed 305 4spdhttp://67-72chevytrucks.com/vboard/s....php?p=3600890(Rip- parts truck now) 68 Dodge Charger

07-05-2011, 08:57 AM	#13
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: if you dont like amc --mixing ford and chevy this thread is not for you to be a true amc i need something dodge-- maybe a hood ornament? lol

07-05-2011, 08:51 PM	#15
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: if you dont like amc --mixing ford and chevy this thread is not for you thats gonna be sick!

07-07-2011, 10:51 PM	#16
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: if you dont like amc --mixing ford and chevy this thread is not for you floor is cleaned up welded up- rust inhibitor brusehd on -- undercoated frame was modified so the 24's no longer rub Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.