rad. support question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70cst10_05 · 07-31-2003, 11:00 PM

Ok, after i finished fixin the rust on my radiator support(kinda tacky lookin) i was out at my grandpas boneyard lookin through some stuff and see a 67-68 grill so i grab it and it still has the rad. support on it, and it is in perfect shape(close enough for bein in kansas) has the battery box and everything, so my question is, how hard is it to make the 67-68 work on my 70, i know i gotta cut off the headlight buckets and weld them back on, but is it very hard????

thanks
kevin

Warbones · 07-31-2003, 11:42 PM

That would be one I am needing to buy from you .

As far as making it work on yours I only wish I knew. Someone is bound to have some answers though. Goodluck.

smokekiki · 08-01-2003, 08:58 AM

I assume it is a chevy?You will need to change fenders to 67-68 and also need the hood.67-68 are different from 69-72.

**john** · 08-01-2003, 07:15 PM

Just take good measurements off of the old one before cutting them off. I used a spot weld drill to remove them. I took horizontal ,vertical and diagonal measurements and they fit perfect first try. I also fastened them with self tapping screws in case they needed to be moved. You wont know how the fit is until the grille and headlight doors are back on. Good Luck John

70cst10_05 · 08-02-2003, 01:32 AM

ok thanks, so will the 70 grill and fenders and such bolt on????

07-31-2003, 11:00 PM	#1
70cst10_05 Registered User Join Date: Dec 2002 Location: Summerfield, Ks Posts: 742	rad. support question Ok, after i finished fixin the rust on my radiator support(kinda tacky lookin) i was out at my grandpas boneyard lookin through some stuff and see a 67-68 grill so i grab it and it still has the rad. support on it, and it is in perfect shape(close enough for bein in kansas) has the battery box and everything, so my question is, how hard is it to make the 67-68 work on my 70, i know i gotta cut off the headlight buckets and weld them back on, but is it very hard???? thanks kevin __________________ 1970 Chevy CST/10 1970 Chevy CST/10 1972 Chevy C/10 1972 Chevy Suburban K/10 2019 Silverado 2500 Duramax Kevin

07-31-2003, 11:42 PM	#2
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	That would be one I am needing to buy from you . As far as making it work on yours I only wish I knew. Someone is bound to have some answers though. Goodluck. __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283

08-01-2003, 08:58 AM	#3
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,474	I assume it is a chevy?You will need to change fenders to 67-68 and also need the hood.67-68 are different from 69-72. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

08-01-2003, 07:15 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Just take good measurements off of the old one before cutting them off. I used a spot weld drill to remove them. I took horizontal ,vertical and diagonal measurements and they fit perfect first try. I also fastened them with self tapping screws in case they needed to be moved. You wont know how the fit is until the grille and headlight doors are back on. Good Luck John __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

08-02-2003, 01:32 AM	#5
70cst10_05 Registered User Join Date: Dec 2002 Location: Summerfield, Ks Posts: 742	ok thanks, so will the 70 grill and fenders and such bolt on???? __________________ 1970 Chevy CST/10 1970 Chevy CST/10 1972 Chevy C/10 1972 Chevy Suburban K/10 2019 Silverado 2500 Duramax Kevin



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.