slamburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fredscarryall · 07-11-2011, 10:37 PM

installed the grille,led turn signals and latching plate. also got the cowl vent and wiper motor in.

99 to Life · 07-11-2011, 10:57 PM

looking great, it's gonna be a real eye catcher for sure.

iehotrod · 07-11-2011, 11:38 PM

Coming along good. Big fan of that grill, I really dig the way look with fresh clean chrome.

fredscarryall · 07-12-2011, 11:23 PM

got the front bumper,bumper filler and headlight buckets in. also got the wiper motor and linkage in. tomorrow the hood ,fog lights and steering column go in and i start figuring out where to install the switches in the dash. then hopefully by the end of the week the plywood floor will be in and the back inner fender will get tacked on. also figured out why the brakes wouldnt bleed.sometimes it the simpliest thing. the calipers where on the wrong sides.so the bleeder where on the bottom instead of on the top. i dont know which is worse. taking 6 hours to unsuccessfully try to bleed the brakes or having a motorcycle guy walk up and instantly tell you whats wrong.

tantrumpipeline · 07-13-2011, 12:17 AM

Quote:

Originally Posted by fredscarryall

got the front bumper,bumper filler and headlight buckets in. also got the wiper motor and linkage in. tomorrow the hood ,fog lights and steering column go in and i start figuring out where to install the switches in the dash. then hopefully by the end of the week the plywood floor will be in and the back inner fender will get tacked on. also figured out why the brakes wouldnt bleed.sometimes it the simpliest thing. the calipers where on the wrong sides.so the bleeder where on the bottom instead of on the top. i dont know which is worse. taking 6 hours to unsuccessfully try to bleed the brakes or having a motorcycle guy walk up and instantly tell you whats wrong.

looks great as always the quality of this build is great, don't feel bad about the brakes I just installed 4 or 8 pistons backwards the other day and spent hours diagnosing with stock marked pistons even

Can't wait to see a video of her cruising

fredscarryall · 07-19-2011, 11:34 PM

got the head lights, fog lights and wood floor in.also got all the vital fluid lines hooked up and filled.

fredscarryall · 07-19-2011, 11:41 PM

had to raise the floor in the back 4 inches to fit the irs. desided to make a small trunk in the very back with access for the air managment and rear battery. with a lid that hinges.

07-11-2011, 10:37 PM	#1
fredscarryall Registered User Join Date: Feb 2010 Location: gresham oregon Posts: 806	Re: slamburban installed the grille,led turn signals and latching plate. also got the cowl vent and wiper motor in. Attached Images

07-11-2011, 10:57 PM	#2
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: slamburban looking great, it's gonna be a real eye catcher for sure. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

07-11-2011, 11:38 PM	#3
iehotrod Registered User Join Date: Dec 2008 Location: Oak Hills, California Posts: 393	Re: slamburban Coming along good. Big fan of that grill, I really dig the way look with fresh clean chrome.

07-12-2011, 11:23 PM	#4
fredscarryall Registered User Join Date: Feb 2010 Location: gresham oregon Posts: 806	Re: slamburban got the front bumper,bumper filler and headlight buckets in. also got the wiper motor and linkage in. tomorrow the hood ,fog lights and steering column go in and i start figuring out where to install the switches in the dash. then hopefully by the end of the week the plywood floor will be in and the back inner fender will get tacked on. also figured out why the brakes wouldnt bleed.sometimes it the simpliest thing. the calipers where on the wrong sides.so the bleeder where on the bottom instead of on the top. i dont know which is worse. taking 6 hours to unsuccessfully try to bleed the brakes or having a motorcycle guy walk up and instantly tell you whats wrong. Attached Images

07-19-2011, 11:34 PM	#6
fredscarryall Registered User Join Date: Feb 2010 Location: gresham oregon Posts: 806	Re: slamburban got the head lights, fog lights and wood floor in.also got all the vital fluid lines hooked up and filled. Attached Images

07-19-2011, 11:41 PM	#7
fredscarryall Registered User Join Date: Feb 2010 Location: gresham oregon Posts: 806	Re: slamburban had to raise the floor in the back 4 inches to fit the irs. desided to make a small trunk in the very back with access for the air managment and rear battery. with a lid that hinges. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.