door pillars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mightymouse · 07-16-2011, 06:37 PM

im tearing out my floor to replace. and when i took off my rocker panels i descoverd the bottom of my front door pillars are rotted off. goodmark,yearone, sell the pillar patch but they dont have bolt holes to bolt to floorpan . does anyone know of any that do? yhanks johnny

bigbadchev72 · 07-16-2011, 06:46 PM

Drill the holes into them, I dont think any of the replacement pieces have holes in them, Just use your cab support for the pattern and drill some hole through it.

mightymouse · 07-16-2011, 06:59 PM

Quote:

Originally Posted by bigbadchev72

Drill the holes into them, I dont think any of the replacement pieces have holes in them, Just use your cab support for the pattern and drill some hole through it.

thanks for the reply bigbadchev72. have you done that before? i was just wondering if they are made in a way so you can drill in the proper place? thanks johnny

bigbadchev72 · 07-16-2011, 07:49 PM

Yes I have done it on 3 different rigs already, Not hard to do at all. Mikes bump and grind garage has great quality good fitting sheetmetal at good prices to, mbgmike is his username on here.

07-16-2011, 06:37 PM	#1
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	door pillars im tearing out my floor to replace. and when i took off my rocker panels i descoverd the bottom of my front door pillars are rotted off. goodmark,yearone, sell the pillar patch but they dont have bolt holes to bolt to floorpan . does anyone know of any that do? yhanks johnny

07-16-2011, 06:46 PM	#2
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: door pillars Drill the holes into them, I dont think any of the replacement pieces have holes in them, Just use your cab support for the pattern and drill some hole through it. __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

07-16-2011, 07:49 PM	#4
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: door pillars Yes I have done it on 3 different rigs already, Not hard to do at all. Mikes bump and grind garage has great quality good fitting sheetmetal at good prices to, mbgmike is his username on here. __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.