62 gmc suburban divorced Transfer case swap from a 221 to a 205: Need Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nbrfd007** · 07-17-2011, 07:03 PM

My 221 divorced transfer case died on me, found a NP 205 divorced case from an 75 international PU. Want do I need to do the swap, mounts, u joints etc? No parts or mounts came with the 205.I need to fall back on everyones expertise.
Thanks,
Tim

b454rat · 07-17-2011, 07:59 PM

Gonna need a cross member for the t-case to bolt to, then mount it to the truck. Might get lucky on the joints, could all be the same size. If not, take one of each to NAPA and see if you can get a conversion joint.

**nbrfd007** · 07-17-2011, 09:24 PM

Quote:

Originally Posted by b454rat

Gonna need a cross member for the t-case to bolt to, then mount it to the truck. Might get lucky on the joints, could all be the same size. If not, take one of each to NAPA and see if you can get a conversion joint.

b454rat,
Do you know if a Dodge or the International crossmember fit the best.
Tim

b454rat · 07-17-2011, 11:07 PM

I've heard that the Dodge will go right in, just drill the holes and install some bolts. The frames have the inside width. Dunno bout the Intersmashable....

**nbrfd007** · 07-17-2011, 11:24 PM

Quote:

Originally Posted by b454rat

I've heard that the Dodge will go right in, just drill the holes and install some bolts. The frames have the inside width. Dunno bout the Intersmashable....

Thanks, the hunt is on.
Tim

'63GENIII · 07-18-2011, 12:23 AM

I've got a np 201 from an international with the crossmember and it fits. Not installed yet but measures up just fine. Same width frame too.

**nbrfd007** · 07-18-2011, 07:51 PM

Quote:

Originally Posted by '63GENIII

I've got a np 201 from an international with the crossmember and it fits. Not installed yet but measures up just fine. Same width frame too.

Thanks 63GenIII,

Does anyone have a crossmember and bracket for a International or Dodge 205/201 divorced transfer case.

Thanks,
Tim

'63GENIII · 07-18-2011, 11:31 PM

The one I have looks like it would be real easy to fab out of some 6"x2" c metal. I could take some measurements if you like. I'd post pics but the site won't let me for some reason

**nbrfd007** · 07-19-2011, 07:23 PM

Quote:

Originally Posted by '63GENIII

The one I have looks like it would be real easy to fab out of some 6"x2" c metal. I could take some measurements if you like. I'd post pics but the site won't let me for some reason

Could you email some pics? nbrfd007@yahoo.com

Thanks,
Tim

'63GENIII · 07-20-2011, 08:30 AM

Hopefully you got them. They loaded real slow. Let me know if you need more pics

**nbrfd007** · 07-20-2011, 08:07 PM

Quote:

Originally Posted by '63GENIII

Hopefully you got them. They loaded real slow. Let me know if you need more pics

63GENIII- Got the pics, thanks,
Tim

07-17-2011, 07:03 PM	#1
nbrfd007 Senior Member Join Date: Nov 2007 Location: New Blaine, Arkansas Posts: 751	62 gmc suburban divorced Transfer case swap from a 221 to a 205: Need Help My 221 divorced transfer case died on me, found a NP 205 divorced case from an 75 international PU. Want do I need to do the swap, mounts, u joints etc? No parts or mounts came with the 205.I need to fall back on everyones expertise. Thanks, Tim

07-17-2011, 07:59 PM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Re: 62 gmc suburban divorced Transfer case swap from a 221 to a 205: Need Help Gonna need a cross member for the t-case to bolt to, then mount it to the truck. Might get lucky on the joints, could all be the same size. If not, take one of each to NAPA and see if you can get a conversion joint. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

07-17-2011, 11:07 PM	#4
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,454	Re: 62 gmc suburban divorced Transfer case swap from a 221 to a 205: Need Help I've heard that the Dodge will go right in, just drill the holes and install some bolts. The frames have the inside width. Dunno bout the Intersmashable.... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS

07-18-2011, 12:23 AM	#6
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: 62 gmc suburban divorced Transfer case swap from a 221 to a 205: Need Help I've got a np 201 from an international with the crossmember and it fits. Not installed yet but measures up just fine. Same width frame too. __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-18-2011, 11:31 PM	#8
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: 62 gmc suburban divorced Transfer case swap from a 221 to a 205: Need Help The one I have looks like it would be real easy to fab out of some 6"x2" c metal. I could take some measurements if you like. I'd post pics but the site won't let me for some reason __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-20-2011, 08:30 AM	#10
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: 62 gmc suburban divorced Transfer case swap from a 221 to a 205: Need Help Hopefully you got them. They loaded real slow. Let me know if you need more pics __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.