![]() |
![]() |
#1 |
So,, what else you got???
![]() Join Date: May 2010
Location: Jackson, Mo
Posts: 18,637
|
hEATER BLOCK OFFS??
Looking to clean up the firewall and later on go with aftermarket heat/air cond. Where can I get the heater delete plates for now, not ready to do the whole install just yet. Just trying to smooth out the firewall right now. Thanks, Fred.
|
![]() |
![]() |
![]() |
#2 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,696
|
Re: hEATER BLOCK OFFS??
Porterbuilt Fabrication sells a weld in panel.
http://www.porterbuiltfabrication.co...ller-Panels-99
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#3 |
So,, what else you got???
![]() Join Date: May 2010
Location: Jackson, Mo
Posts: 18,637
|
Re: hEATER BLOCK OFFS??
Thanks Keith. Thought I saw some that were seperate pieces and even some that reshaped the upper area to match the drivers side. maybe i am imagining things, you know how everything runs together after awhile.
Last edited by specialtyretail; 07-25-2011 at 04:44 PM. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2011
Location: islamorada fl.
Posts: 466
|
Re: hEATER BLOCK OFFS??
Doing the same thing,today as a matter of fact.I removed all heater parts inside and out.I then made 3 cardboard templates for the 3 large holes.I cut some 1/8" aluminium plate to fit snugly and using Duraglass to fill void.I drilled a 1/4" hole in the centers of each plate and put in a self tapping lag bolt to make fit and check for fit easier.I don't weld but I am very good with glass work.I will get some pics up.I realize that weld in plates are best just did not have that option.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|