My GMC Sierra Grande: Project GOLDIE - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

355GoldieGM · 12-22-2010, 05:06 AM

Quote:

Originally Posted by 3r!c84

i just instaled my Auburn posi a week ago ! love it. got mine for 300$ new in the box

Paid mine 525$ canadian, new out of the box... but they dont look exactly the same, yours is larger.

355GoldieGM · 12-22-2010, 05:15 AM

pulleys

Right now iam running the stock pulleys, i heard, that by changing one or some on the pulleys that i could gain a couple HP (loose less), I plan on shedding the mecanical fan setup aswell, could any one help me... Id like to know which pulley(s) to change and what size, as ive shoped a bit and there seem to be a couple of options. the only accessories i have are power streering pump, alterantor and the water pump, I have no A/C
Thanks in advance for any info!

*nbpro* · 12-22-2010, 01:42 PM

Quote:

Originally Posted by 355GoldieGM

PARTS SEARH

If you guys have any spare parts you wanna get rid of or sell, im looking for:
-Cab Back panel molding + corner moldings
-Wheel arch molding kit
-2 1/2 in. drop spindels or 2 in. drop coils
-Spring shackles
-3 prong center caps
-electric fan

http://67-72chevytrucks.com/vboard/forumdisplay.php?f=5

355GoldieGM · 12-22-2010, 02:44 PM

Quote:

Originally Posted by nbpro

http://67-72chevytrucks.com/vboard/forumdisplay.php?f=5

Thanks tried to post a Looking For add but, cant start a thread, havent reached the requiered amount of posts i guess or i dont know!!
But i did reply to a post about some cab moldings,.... with any luck!!

*nbpro* · 12-22-2010, 03:13 PM

http://67-72chevytrucks.com/vboard/a...t.php?f=4&a=17

355GoldieGM · 12-22-2010, 03:21 PM

Alrighty then thanks for the info, much clearer now!

Your a huge help thanks a million buddy!

billnorman · 12-22-2010, 04:03 PM

I changed my diff on my '85 from a worn out 3:08 to a 12 bolt 3:40 out of a Big10 I think it was a '78. It's quiet and really zipped the power up but now I need a 700R4 instead of the TH350 to keep the RPM reasonable on the highway. It is indeed a 3:40, I checked it several times, counted the teeth etc. They were made stock by Chev.

355GoldieGM · 01-08-2011, 05:09 AM

i knew my diff assembly wasnt the gmc original, i just had no idea what it came out of.. then when rebuilding it I found the 3.40 gears... probably from a earlier chevy model i thought, and you seem to be confirming that lol

Chlsnk · 01-09-2011, 01:49 PM

See if you can find a product called Zep-Alum it will clean those wheels with alittle scrubbing and make them look brand new.

355GoldieGM · 01-13-2011, 12:09 AM

I already started cleaning them up.. they were pretty bad,,, but with a little elbow grease, metal brushes, some sandpaper and mag polish they came out not to bad.. iam just polishing the lip and top of spokes because the inner spokes is just to much work to get too... iam thinking about either leaving it rough, or painting them, i havent decided yet ..... ill have some pics up soon.

355GoldieGM · 07-19-2011, 02:11 AM

ran 8.71 on the 1/8mile last w/e
i think its pretty decent for a 2ton tank

ghettoluxury · 07-19-2011, 05:18 AM

Do you have any pics of your finished seat?

Kerlijah · 07-19-2011, 06:27 AM

Quote:

Originally Posted by 355GoldieGM

Aluminum Wheels

Just fond these for sell real cheap, should be getting them by new years

2 8x15 and 2 9x15
Attachment 671318
GM Turbine Mags

These need a little love and care, could anyone gimme a few pointers on how i could make these shine?

I have the exact same rims on my '79. I use Eagle One Nevr-Dull, it seems to work pretty good. Just rub it on real good (it doesnt take much) and polish it up with a real fine steel wool. Does the trick for me at least. One of these days I'm gonna paint em, just havent got around to it yet, lol.
Sweet truck man, lookin good!

355GoldieGM · 07-19-2011, 11:31 AM

Quote:

Originally Posted by ghettoluxury

Do you have any pics of your finished seat?

I dont have any on hand but ill try and take one this week and post it up here.

355GoldieGM · 07-19-2011, 11:34 AM

Quote:

Originally Posted by Kerlijah

I have the exact same rims on my '79. I use Eagle One Nevr-Dull, it seems to work pretty good. Just rub it on real good (it doesnt take much) and polish it up with a real fine steel wool. Does the trick for me at least. One of these days I'm gonna paint em, just havent got around to it yet, lol.
Sweet truck man, lookin good!

Thanks!
Sanded and polished mine with mothers mag polish there were pretty bad and im still working on them every so often i have 2 finished up. Did you have to slot them to fit your truck? mine will have to be, thought they were bolt on when I bought them.

Kerlijah · 07-20-2011, 01:02 AM

Ah cool, Mother's is good stuff. Them mag wheels are a pain to keep clean, I gotta polish mine all the time just to keep em lookin decent, lol. Naw, mine actually just went right on, perfect fit!

InLimbo · 07-21-2011, 01:43 AM

Nice truck. Do you have the part # for those headers? They look great, do they hang below the frame much?

355GoldieGM · 07-25-2011, 08:18 PM

Quote:

Originally Posted by 355GoldieGM

I dont have any on hand but ill try and take one this week and post it up here.

here are a couple pics of the seat as promised

355GoldieGM · 07-25-2011, 08:38 PM

Quote:

Originally Posted by InLimbo

Nice truck. Do you have the part # for those headers? They look great, do they hang below the frame much?

Nope not at all theire a pretty nice fit but i did have to unbolt the block to get the drivers side to squeez through.

Name: PICT0010.jpg
Views: 362
Size: 90.4 KB

Name: PICT0010.jpg
Views: 362
Size: 90.4 KB

Heres the link if you want to chek them out a bit more

http://www.summitracing.com/parts/HOK-2451HKR/

there available in ceramic coated too

12-22-2010, 05:15 AM	#27
355GoldieGM Registered User Join Date: Dec 2010 Location: Estrie Quebec Posts: 59	Re: My GMC Sierra Grande: Project GOLDIE pulleys Right now iam running the stock pulleys, i heard, that by changing one or some on the pulleys that i could gain a couple HP (loose less), I plan on shedding the mecanical fan setup aswell, could any one help me... Id like to know which pulley(s) to change and what size, as ive shoped a bit and there seem to be a couple of options. the only accessories i have are power streering pump, alterantor and the water pump, I have no A/C Thanks in advance for any info! __________________ BAM BAM My Project: http://67-72chevytrucks.com/vboard/s...ghlight=goldie Last edited by 355GoldieGM; 12-22-2010 at 05:18 AM.

12-22-2010, 03:13 PM	#30
nbpro Account Suspended Join Date: Dec 2008 Location: Huntsville,AL Posts: 2,119	Re: My GMC Sierra Grande: Project GOLDIE http://67-72chevytrucks.com/vboard/a...t.php?f=4&a=17

12-22-2010, 03:21 PM	#31
355GoldieGM Registered User Join Date: Dec 2010 Location: Estrie Quebec Posts: 59	Re: My GMC Sierra Grande: Project GOLDIE Alrighty then thanks for the info, much clearer now! Your a huge help thanks a million buddy! __________________ BAM BAM My Project: http://67-72chevytrucks.com/vboard/s...ghlight=goldie

12-22-2010, 04:03 PM	#32
billnorman Registered User Join Date: Mar 2009 Location: glen burnie md Posts: 174	Re: My GMC Sierra Grande: Project GOLDIE I changed my diff on my '85 from a worn out 3:08 to a 12 bolt 3:40 out of a Big10 I think it was a '78. It's quiet and really zipped the power up but now I need a 700R4 instead of the TH350 to keep the RPM reasonable on the highway. It is indeed a 3:40, I checked it several times, counted the teeth etc. They were made stock by Chev.

01-08-2011, 05:09 AM	#33
355GoldieGM Registered User Join Date: Dec 2010 Location: Estrie Quebec Posts: 59	Re: My GMC Sierra Grande: Project GOLDIE i knew my diff assembly wasnt the gmc original, i just had no idea what it came out of.. then when rebuilding it I found the 3.40 gears... probably from a earlier chevy model i thought, and you seem to be confirming that lol __________________ BAM BAM My Project: http://67-72chevytrucks.com/vboard/s...ghlight=goldie

01-09-2011, 01:49 PM	#34
Chlsnk Registered User Join Date: Jan 2009 Location: Kansas city Posts: 756	Re: My GMC Sierra Grande: Project GOLDIE See if you can find a product called Zep-Alum it will clean those wheels with alittle scrubbing and make them look brand new. __________________ *My 84 short bed build up*** http://67-72chevytrucks.com/vboard/s...68#post3481968

01-13-2011, 12:09 AM	#35
355GoldieGM Registered User Join Date: Dec 2010 Location: Estrie Quebec Posts: 59	Re: My GMC Sierra Grande: Project GOLDIE I already started cleaning them up.. they were pretty bad,,, but with a little elbow grease, metal brushes, some sandpaper and mag polish they came out not to bad.. iam just polishing the lip and top of spokes because the inner spokes is just to much work to get too... iam thinking about either leaving it rough, or painting them, i havent decided yet ..... ill have some pics up soon. __________________ BAM BAM My Project: http://67-72chevytrucks.com/vboard/s...ghlight=goldie Last edited by 355GoldieGM; 01-13-2011 at 12:14 AM.

07-19-2011, 02:11 AM	#36
355GoldieGM Registered User Join Date: Dec 2010 Location: Estrie Quebec Posts: 59	Re: My GMC Sierra Grande: Project GOLDIE ran 8.71 on the 1/8mile last w/e i think its pretty decent for a 2ton tank __________________ BAM BAM My Project: http://67-72chevytrucks.com/vboard/s...ghlight=goldie

07-19-2011, 05:18 AM	#37
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: My GMC Sierra Grande: Project GOLDIE Do you have any pics of your finished seat? __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

07-20-2011, 01:02 AM	#41
Kerlijah Registered User Join Date: Feb 2011 Location: Boise, ID Posts: 293	Re: My GMC Sierra Grande: Project GOLDIE Ah cool, Mother's is good stuff. Them mag wheels are a pain to keep clean, I gotta polish mine all the time just to keep em lookin decent, lol. Naw, mine actually just went right on, perfect fit! __________________ ~Wooden Indian~ 1979 C10 SWB, shaved bed rails, drip rails, tailgate handle. 350 w/ Comp cam, hydraulic lifters, Edelbrock Performer intake, Edelbrock 650 carb, Flowtech headers, Flowmaster 40s, turbo 350 w/stage 2 shift kit...so much fun!

07-21-2011, 01:43 AM	#42
InLimbo Registered User Join Date: Oct 2010 Location: Charleston, SC Posts: 34	Re: My GMC Sierra Grande: Project GOLDIE Nice truck. Do you have the part # for those headers? They look great, do they hang below the frame much?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.