63-72 Chevy P/U Rear Shock Mount System - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michellenolimit** · 08-03-2011, 06:59 PM

Here are some installation pictures........

cpetersen · 09-17-2011, 10:57 AM

Quote:

Originally Posted by michellenolimit

Here are some installation pictures........

One more question. How far is the shock from the frame rail? If you were to use a KYB gas adjust would I have to cut the shocks upper protecting steel sheeve off? It might be tight, Do you have a vertical picture from the back view?

**robnolimit** · 09-17-2011, 12:11 PM

Quote:

Originally Posted by cpetersen

One more question. How far is the shock from the frame rail? If you were to use a KYB gas adjust would I have to cut the shocks upper protecting steel sheeve off? It might be tight, Do you have a vertical picture from the back view?

plenty of room, the inside edge of the shock eye is 1 1/4" from the frame rail. Or, the shock centerline is 1 15/16" from the rail. no need to trim anything.

Andy4639 · 09-17-2011, 12:27 PM

Still waiting on my kit!

I was hoping to have it done by Monday my only day off next week.

**robnolimit** · 09-17-2011, 02:52 PM

Quote:

Originally Posted by Andy4639

Still waiting on my kit!

I was hoping to have it done by Monday my only day off next week.

All of these went out on wednesday of last week. Hope they show up soon.

Andy4639 · 09-17-2011, 04:01 PM

Quote:

Originally Posted by robnolimit

All of these went out on wednesday of last week. Hope they show up soon.

Me to!

Andy4639 · 09-19-2011, 07:23 PM

Just called and got the tracking #. They shipped on the 15 will be here Wenesday I sure hope so!
Ron can you tell me what had to be modified and why on the kit. The lady on the phone said there were some issues with it.

08-03-2011, 06:59 PM	#1
michellenolimit Junior Member Join Date: Nov 2010 Location: Norco, Ca. Posts: 40	Re: 63-72 Chevy P/U Rear Shock Mount System Here are some installation pictures........ Attached Images __________________ Michelle No Limit Engineering Authorized Dealer for: Ridetech, Vintage Air, Painless, Ididit, Accuair, Flaming River, and many more

09-17-2011, 12:27 PM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 63-72 Chevy P/U Rear Shock Mount System Still waiting on my kit! I was hoping to have it done by Monday my only day off next week. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

09-19-2011, 07:23 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 63-72 Chevy P/U Rear Shock Mount System Just called and got the tracking #. They shipped on the 15 will be here Wenesday I sure hope so! Ron can you tell me what had to be modified and why on the kit. The lady on the phone said there were some issues with it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.