|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-07-2011, 01:18 PM
|
#1 |
|
Registered User
Join Date: Mar 2008
Location: tn
Posts: 286
|
leaking high pressure valve
Hi...
First off it's a 1990 k2500 350 tbi auto.... Last summer I followed this and got my A/C up and running... Well overnight anyway... Turned out to be I still had a leaking high pressure valve. So I got a new one and was unable to install because the local parts house could not get me the tool needed to remove the old one.. They sold me a tire tool and it is much to small... Anyone know where I can get the right tool???? Thanks...
__________________
"If at first you don't succeed use more duct tape" Red Green.... Danger --if you meet it promptly and without flinching -- you will reduce the danger by half. Never run away from anything. Never! -Winston Churchill A few of my holsters............. |
|
|
|
08-07-2011, 01:53 PM
|
#2 |
|
Registered User
Join Date: Feb 2000
Location: Wichita Falls, Texas
Posts: 3,153
|
Re: leaking high pressure valve
My mechanic used a pair of Vise-Grips on my Suburban.
|
|
|
|
|
08-07-2011, 02:20 PM
|
#3 |
|
The One And Only !!!
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
|
Re: leaking high pressure valve
I got mine off the Matco tool truck; http://www.matcotools.com/catalog/pr...-REMOVER-INST/
There's one here;  Amazon.com: Interdynamics VT-2 Large Size Air...I find it stupid your local parts store didn't have one, I see them in mine but the tool truck came to me.....
__________________
93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz !  The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
|
|
|
08-07-2011, 03:29 PM
|
#4 |
|
Registered User
Join Date: Mar 2008
Location: tn
Posts: 286
|
Re: leaking high pressure valve
Ok I went back to the parts house and made a stink.. Guess what when they got off their buts they found one out back.....
So as of now I have a/c again and with all new O rings and high and low pressure valves. Hopefully it wont leak... Thanks!!
__________________
"If at first you don't succeed use more duct tape" Red Green.... Danger --if you meet it promptly and without flinching -- you will reduce the danger by half. Never run away from anything. Never! -Winston Churchill A few of my holsters............. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
