Help Identifying a Dog Dish Cap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 08-07-2011, 02:27 PM

I bought these a while back and was told they were Chevy truck. I had them measure them at the time and I was off on what I needed and they will not fit the truck wheels I have becase they are to small. They measure approx. 9 1/2" outer diameter. The outside could be paint but looks to me to be porcelin. Does anybody have any idea what these are off of??? Are they Chevy truck or Chevy car??? Thanks for any help.

If this is not in the correct area please move it to the correct one. Thanks

Longhorn Man · 08-07-2011, 02:31 PM

with a yellow bow tie, they are newer than our trucks, 73 on up.
Can't help on WHAT they are for though

**too much stuff** · 08-07-2011, 02:33 PM

Mid 70s chevy luv???

mbgmike · 08-07-2011, 03:02 PM

Quote:

Originally Posted by too much stuff

Mid 70s chevy luv???

You win

top one is. not sure on bottom

mbgmike · 08-07-2011, 03:05 PM

I drank too much

I just realized its the backside. oops

**Todd68Chevy** · 08-07-2011, 03:21 PM

Quote:

Originally Posted by Longhorn Man

with a yellow bow tie, they are newer than our trucks, 73 on up.
Can't help on WHAT they are for though

For not knowing what they fit you was right on the year. Thanks

Quote:

Originally Posted by too much stuff

Mid 70s chevy luv???

Eric, I really thought you might be screwing with me when I first read this but now I know you really do know everything. Thanks

Quote:

Originally Posted by mbgmike

You win

top one is. not sure on bottom

Thanks a lot but now I do not know if I should be happy that I found out what they are from or pissed off because I bought a set of hub caps that are for a Luv. LOL I guess with all the Chevys and parts that I have owned this is the first Luv part that I know I have had. After reading this I did a quick search on Luv hub caps and it looks like it is 1972-73.

Thanks again

ChevLoRay · 08-07-2011, 03:51 PM

LUV (light utility vehicle) wheels are 14-inch, 6 on 5.5 bolt pattern. You can run those caps on those wheels.

**Todd68Chevy** · 08-07-2011, 04:22 PM

Quote:

Originally Posted by ChevLoRay

LUV (light utility vehicle) wheels are 14-inch, 6 on 5.5 bolt pattern. You can run those caps on those wheels.

The caps pictured are 1" diameter smaller than what my truck takes. My caps measure 10 1/2" diameter. I am running my original 6 lug caps on 5 lug wheels and they fit fine but these are to small.

mbgmike · 08-07-2011, 09:53 PM

Quote:

Originally Posted by Todd68Chevy

For not knowing what they fit you was right on the year. Thanks

Eric, I really thought you might be screwing with me when I first read this but now I know you really do know everything. Thanks

Thanks a lot but now I do not know if I should be happy that I found out what they are from or pissed off because I bought a set of hub caps that are for a Luv. LOL I guess with all the Chevys and parts that I have owned this is the first Luv part that I know I have had. After reading this I did a quick search on Luv hub caps and it looks like it is 1972-73.

Thanks again

sorry you asked,but you can always be able to sell them in a few years to recoop

**Todd68Chevy** · 08-07-2011, 10:01 PM

Quote:

Originally Posted by mbgmike

sorry you asked,but you can always be able to sell them in a few years to recoop

I am really happy to know what they fit. I like how they look but just wish they fit my wheels. You think in a few years there might be someone restoring a LUV. I actually know a guy that still drives a yellow LUV.

mbgmike · 08-07-2011, 10:20 PM

Quote:

Originally Posted by Todd68Chevy

I am really happy to know what they fit. I like how they look but just wish they fit my wheels. You think in a few years there might be someone restoring a LUV. I actually know a guy that still drives a yellow LUV.

Hey they are in nice condition and not many around. Never know who will need a set

**too much stuff** · 08-07-2011, 10:23 PM

Awww, do you think i would screw with you??? No really, tell me because i don't know! I just type what the voices tell me to..........

I have seen a few on e-bay, but haven't noticed what they go for.

**Todd68Chevy** · 08-07-2011, 10:34 PM

Mike I am not worried about it. If nothing else they will make good garage art and conversation piece.

Eric, I should have known better but the guys around here you got to watch. Better watch those voices, I would hate for them to get in the way of all your knowledge.

Thanks again to both of you!!!

**special-K** · 08-09-2011, 08:28 AM

I am sure there are and will be Chevy LUVs restored. I wouldn't mind having one.

Longhorn Man · 08-09-2011, 09:39 AM

i kn ew a guy about 15 years ago had a freshly restored one. He loved those things.

bw4sale · 08-09-2011, 12:54 PM

I just saw someone on here the other day who was looking for a set. It may have been in the 60-66 section but I can't remember. Anyway, there is some market for them if you decide to get rid of them.

08-07-2011, 02:27 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Help Identifying a Dog Dish Cap I bought these a while back and was told they were Chevy truck. I had them measure them at the time and I was off on what I needed and they will not fit the truck wheels I have becase they are to small. They measure approx. 9 1/2" outer diameter. The outside could be paint but looks to me to be porcelin. Does anybody have any idea what these are off of??? Are they Chevy truck or Chevy car??? Thanks for any help. If this is not in the correct area please move it to the correct one. Thanks Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

08-07-2011, 02:31 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Help Identifying a Dog Dish Cap with a yellow bow tie, they are newer than our trucks, 73 on up. Can't help on WHAT they are for though

08-07-2011, 02:33 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: Help Identifying a Dog Dish Cap Mid 70s chevy luv??? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-07-2011, 03:05 PM	#5
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Help Identifying a Dog Dish Cap I drank too much I just realized its the backside. oops

08-07-2011, 03:51 PM	#7
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Help Identifying a Dog Dish Cap LUV (light utility vehicle) wheels are 14-inch, 6 on 5.5 bolt pattern. You can run those caps on those wheels. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

08-07-2011, 10:23 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: Help Identifying a Dog Dish Cap Awww, do you think i would screw with you??? No really, tell me because i don't know! I just type what the voices tell me to.......... I have seen a few on e-bay, but haven't noticed what they go for. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-07-2011, 10:34 PM	#13
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,975	Re: Help Identifying a Dog Dish Cap Mike I am not worried about it. If nothing else they will make good garage art and conversation piece. Eric, I should have known better but the guys around here you got to watch. Better watch those voices, I would hate for them to get in the way of all your knowledge. Thanks again to both of you!!! __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 08-07-2011 at 10:35 PM. Reason: spelling

08-09-2011, 08:28 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Help Identifying a Dog Dish Cap I am sure there are and will be Chevy LUVs restored. I wouldn't mind having one. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-09-2011, 09:39 AM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Help Identifying a Dog Dish Cap i kn ew a guy about 15 years ago had a freshly restored one. He loved those things.

08-09-2011, 12:54 PM	#16
bw4sale Registered User Join Date: Sep 2006 Location: Hendersonville, TN Posts: 1,528	Re: Help Identifying a Dog Dish Cap I just saw someone on here the other day who was looking for a set. It may have been in the 60-66 section but I can't remember. Anyway, there is some market for them if you decide to get rid of them. __________________ BRENT -'68 Stepside Project -'98 Z71 Daily Driver -Enough extra parts to build another truck and a half



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.