ARE 67 and 71 BUMPERS SAME? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Steve Van Gent · 08-10-2011, 04:09 PM

Found good 67 bumper, will it bolt onto 71 truck? Are they same?

Thanks,

Steve

bmfm64 · 08-10-2011, 04:18 PM

Front? Rear? Chevy? Gmc?
Posted via Mobile Device

brad_man_72 · 08-10-2011, 04:21 PM

rears all the same. Front 67-69 don't have turn signal holes. Gmc has cutouts on top of front bumper for turn signals on all 67-72.
fronts will all bolt up, plenty of trucks out there with the wrong bumper.

Steve Van Gent · 08-10-2011, 04:22 PM

Sorry, Front bumper. 67 GMC, going on 71 chevy...

Steve Van Gent · 08-10-2011, 04:25 PM

Also, I presume a 67 GMC truck auto-tilt column will bolt into 71 chevy, (did they have tilt in 67???)

budnikguy · 08-10-2011, 04:41 PM

The '67 will will bolt on, but is not correct. Does not have the holes in the bumper for the marker/turn signal lights, and GMC bumper will have indention's for the GMC marker/turn signal light along the top of the bumper.

Mayo · 08-10-2011, 05:43 PM

Also, the outer bumper brackets are do not interchange. To run a 67-70 bumper, you need 67-70 brackets, 71-72 Chevys are different.

**John Fabris** · 08-10-2011, 05:46 PM

no on tilt in 67, tilt started in 69, however, useable on all years.

Oh, and hello from nor cal.

Steve Van Gent · 08-11-2011, 12:49 AM

Does the fender from GMC 1 ton dually fit 71 1/2 ton? What about master with power booster? Power steering box?

Sorry for all questions, I found guy selling parts cheap, dont want to buy anything off GMC 1 ton that wont fit my 71 half...

Thanks,

Steve

**Classic Heartbeat** · 08-11-2011, 01:28 AM

67 fenders are different, so they won't work.
The booster master cylinder combo is for drum/drum brakes. 71 is disk drum, so again it wont work.
The power steering should be ram assist and the 71 is integral gear, again no go. WES

**special-K** · 08-11-2011, 09:47 AM

How cheap is the tilt column? It was swapped and could be a van tilt. But.even those go for good money these days. Same with the fenders. You should buy those and re-sell if the price is right (and they are in good condition...mostly not rusty). The '67 GMC bumper,if it's original,will be the same as a 67-70 Chevy bumper. You can mount the turn signals (71/72( behind the grille. The ones on my '71 tow truck w/push bumper are in the upper corners and I had a plow truck I mounted the signals in the lower corners due to a fabricated bumper.

08-10-2011, 04:09 PM	#1
Steve Van Gent Registered User Join Date: Feb 2009 Location: Redding, Ca Posts: 333	ARE 67 and 71 BUMPERS SAME? Found good 67 bumper, will it bolt onto 71 truck? Are they same? Thanks, Steve

08-10-2011, 04:18 PM	#2
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: ARE 67 and 71 BUMPERS SAME? Front? Rear? Chevy? Gmc? Posted via Mobile Device

08-10-2011, 04:21 PM	#3
brad_man_72 the boat guy Join Date: Jul 2007 Location: springfield mo Posts: 2,339	Re: ARE 67 and 71 BUMPERS SAME? rears all the same. Front 67-69 don't have turn signal holes. Gmc has cutouts on top of front bumper for turn signals on all 67-72. fronts will all bolt up, plenty of trucks out there with the wrong bumper.

08-10-2011, 04:22 PM	#4
Steve Van Gent Registered User Join Date: Feb 2009 Location: Redding, Ca Posts: 333	Re: ARE 67 and 71 BUMPERS SAME? Sorry, Front bumper. 67 GMC, going on 71 chevy...

08-10-2011, 04:25 PM	#5
Steve Van Gent Registered User Join Date: Feb 2009 Location: Redding, Ca Posts: 333	Re: ARE 67 and 71 BUMPERS SAME? Also, I presume a 67 GMC truck auto-tilt column will bolt into 71 chevy, (did they have tilt in 67???)

08-10-2011, 04:41 PM	#6
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: ARE 67 and 71 BUMPERS SAME? The '67 will will bolt on, but is not correct. Does not have the holes in the bumper for the marker/turn signal lights, and GMC bumper will have indention's for the GMC marker/turn signal light along the top of the bumper.

08-10-2011, 05:43 PM	#7
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: ARE 67 and 71 BUMPERS SAME? Also, the outer bumper brackets are do not interchange. To run a 67-70 bumper, you need 67-70 brackets, 71-72 Chevys are different. __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

08-10-2011, 05:46 PM	#8
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: ARE 67 and 71 BUMPERS SAME? no on tilt in 67, tilt started in 69, however, useable on all years. Oh, and hello from nor cal. __________________ John Fabris 67 C10 SWB

08-11-2011, 12:49 AM	#9
Steve Van Gent Registered User Join Date: Feb 2009 Location: Redding, Ca Posts: 333	Re: ARE 67 and 71 BUMPERS SAME? Does the fender from GMC 1 ton dually fit 71 1/2 ton? What about master with power booster? Power steering box? Sorry for all questions, I found guy selling parts cheap, dont want to buy anything off GMC 1 ton that wont fit my 71 half... Thanks, Steve

08-11-2011, 01:28 AM	#10
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: ARE 67 and 71 BUMPERS SAME? 67 fenders are different, so they won't work. The booster master cylinder combo is for drum/drum brakes. 71 is disk drum, so again it wont work. The power steering should be ram assist and the 71 is integral gear, again no go. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

08-11-2011, 09:47 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: ARE 67 and 71 BUMPERS SAME? How cheap is the tilt column? It was swapped and could be a van tilt. But.even those go for good money these days. Same with the fenders. You should buy those and re-sell if the price is right (and they are in good condition...mostly not rusty). The '67 GMC bumper,if it's original,will be the same as a 67-70 Chevy bumper. You can mount the turn signals (71/72( behind the grille. The ones on my '71 tow truck w/push bumper are in the upper corners and I had a plow truck I mounted the signals in the lower corners due to a fabricated bumper. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.