Need help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

J/D/S · 08-11-2011, 04:41 PM

What are the round holes on the right of my firewall.

Jonboy · 08-11-2011, 04:51 PM

The top one is for the wiper motor (the large one), the one towards the center of the firewall is for the speedometer cable, and the lower one is for the e-brake cable. I think.

J/D/S · 08-11-2011, 05:13 PM

E brake comes out of the bottom I belive.

Rogue_Alphonse · 08-11-2011, 08:11 PM

Is it a standard transmission cab? The lowest hold could be for a Z-bar clutch setup. I really don't know, but I'll find out when I convert my auto into a Z-bar setup with a Muncie

1LowToy · 08-11-2011, 08:26 PM

Well now that those questions are answered, where's the rest of the pics.

Show it of a little

J/D/S · 08-12-2011, 02:28 AM

Quote:

Originally Posted by Rogue_Alphonse

Is it a standard transmission cab? The lowest hold could be for a Z-bar clutch setup. I really don't know, but I'll find out when I convert my auto into a Z-bar setup with a Muncie

The truck is a factory automatic.

J/D/S · 08-12-2011, 02:29 AM

Quote:

Originally Posted by 1LowToy

Well now that those questions are answered, where's the rest of the pics.

Show it off a little

Go to my build thread there's pictures there.

J/D/S · 08-12-2011, 02:31 AM

Still don't know what the bottom hole it for.

J/D/S · 08-14-2011, 02:15 AM

Were's the experts? No one can tell me what its for?

juiceman650 · 08-14-2011, 03:50 AM

The one with like the pinkish insulation inside?
Posted via Mobile Device

J/D/S · 08-14-2011, 02:42 PM

Yep! thats the one.

juiceman650 · 08-14-2011, 04:48 PM

Okay, I'll check to see if my 75 has one when I get a chance.
Posted via Mobile Device

J/D/S · 08-15-2011, 04:29 PM

Any luck?

J/D/S · 08-15-2011, 10:03 PM

OH COME ON!!!!!!!!! No one has a clue what this hole is for?

J/D/S · 08-18-2011, 03:30 PM

No one has a 79 that they can walk out to and look at to see what the bottom hole is?

motornut · 08-18-2011, 03:57 PM

guess you gotta have a hole to know how to use it
this truck has no hole ,no AC,no cruise ,born stock 305/203......but it's a 78

what did you take out of it?

GmtGmt · 08-18-2011, 04:28 PM

thats for the dual tank selector swich harness it has a rubber grummet where 2 wire connectors corrent inside and out

J/D/S · 08-19-2011, 04:09 AM

Awsome thank you very much
Posted via Mobile Device

08-11-2011, 04:41 PM	#1
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Need help What are the round holes on the right of my firewall. Attached Images __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-11-2011, 04:51 PM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Need help The top one is for the wiper motor (the large one), the one towards the center of the firewall is for the speedometer cable, and the lower one is for the e-brake cable. I think. __________________ 1974 Jimmy- 5.3/4L80e/NP241

08-11-2011, 05:13 PM	#3
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help E brake comes out of the bottom I belive. __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-11-2011, 08:11 PM	#4
Rogue_Alphonse Registered User Join Date: Dec 2009 Location: Gap PA Posts: 280	Re: Need help Is it a standard transmission cab? The lowest hold could be for a Z-bar clutch setup. I really don't know, but I'll find out when I convert my auto into a Z-bar setup with a Muncie __________________ 1991 Mustang GT Vert, T-5 w/ Pro 5.0, Trick Flow upper & lower, BBK cold air intake, 3:73, BAMA chip, etc. 1988 K5 Blazer, [coming soon] TBI 400, SM465/NP208, 12 bolt rear, 3:08's, looks like a 1980. 1998 Jeep Grand Cherokee 4.0 fully loaded daily driver! Where there's a will, there's a rig!

08-11-2011, 08:26 PM	#5
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: Need help Well now that those questions are answered, where's the rest of the pics. Show it of a little

08-12-2011, 02:31 AM	#8
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help Still don't know what the bottom hole it for. __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-14-2011, 02:15 AM	#9
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help Were's the experts? No one can tell me what its for? __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-14-2011, 03:50 AM	#10
juiceman650 Registered User Join Date: Jan 2011 Location: San Bruno, CA. Posts: 348	Re: Need help The one with like the pinkish insulation inside? Posted via Mobile Device

08-14-2011, 02:42 PM	#11
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help Yep! thats the one. __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-14-2011, 04:48 PM	#12
juiceman650 Registered User Join Date: Jan 2011 Location: San Bruno, CA. Posts: 348	Re: Need help Okay, I'll check to see if my 75 has one when I get a chance. Posted via Mobile Device

08-15-2011, 04:29 PM	#13
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help Any luck? __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-15-2011, 10:03 PM	#14
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help OH COME ON!!!!!!!!! No one has a clue what this hole is for? __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-18-2011, 03:30 PM	#15
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help No one has a 79 that they can walk out to and look at to see what the bottom hole is? __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."

08-18-2011, 03:57 PM	#16
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Need help guess you gotta have a hole to know how to use it this truck has no hole ,no AC,no cruise ,born stock 305/203......but it's a 78 what did you take out of it? Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

08-19-2011, 04:09 AM	#18
J/D/S Registered User Join Date: Jan 2008 Location: Fort Campbell KY Posts: 271	Re: Need help Awsome thank you very much Posted via Mobile Device __________________ John Bernard Books (The Shootist): "I won't be wronged, I won't be insulted, and I won't be laid a hand on. I don't do these things to other people and I expect the same from them."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.