Is this the right setup? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TheSeeker · 08-25-2011, 02:48 PM

Im currenty looking at this Power Steering set up for my 250. Its a 69 non integral 250 will it work? Thanks! (I know Ill need lines and a power gear box, etc.) Set in question: http://cgi.ebay.com/ebaymotors/ws/eB...CA:MOTORS:1123

TheSeeker · 08-26-2011, 02:43 PM

nobody??

**Classic Heartbeat** · 08-26-2011, 03:07 PM

It looks to be the correct one to me. WES

stsalvage · 08-26-2011, 08:46 PM

i have pictures of my 1969 nova 250 inline 6 that i'm going to use in my 1968 longhorn after i convert it over to 1/2 ton if you need more close up pics i can get them for ya my email is stsalvage@yahoo.com

one last thing a 700R4 would really make your truck hum and get grate gas mileage and lesser RPM's get the 1988--93 cable one you will have to shorten your drive shaft But it makes driving the inline 6 so much nicer with 4 gears

stsalvage · 08-26-2011, 08:49 PM

more pics

stsalvage · 08-26-2011, 08:53 PM

the bottom pulley has 2 belts going to it so dose the alternator and so dose the water pump pulley

08-25-2011, 02:48 PM	#1
TheSeeker Registered User Join Date: Dec 2009 Location: Glendale, AZ Posts: 337	Is this the right setup? Im currenty looking at this Power Steering set up for my 250. Its a 69 non integral 250 will it work? Thanks! (I know Ill need lines and a power gear box, etc.) Set in question: http://cgi.ebay.com/ebaymotors/ws/eB...CA:MOTORS:1123

08-26-2011, 02:43 PM	#2
TheSeeker Registered User Join Date: Dec 2009 Location: Glendale, AZ Posts: 337	Re: Is this the right setup? nobody??

08-26-2011, 03:07 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Is this the right setup? It looks to be the correct one to me. WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

08-26-2011, 08:46 PM	#4
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: Is this the right setup? i have pictures of my 1969 nova 250 inline 6 that i'm going to use in my 1968 longhorn after i convert it over to 1/2 ton if you need more close up pics i can get them for ya my email is stsalvage@yahoo.com one last thing a 700R4 would really make your truck hum and get grate gas mileage and lesser RPM's get the 1988--93 cable one you will have to shorten your drive shaft But it makes driving the inline 6 so much nicer with 4 gears Attached Images

08-26-2011, 08:49 PM	#5
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: Is this the right setup? more pics Attached Images

08-26-2011, 08:53 PM	#6
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: Is this the right setup? the bottom pulley has 2 belts going to it so dose the alternator and so dose the water pump pulley



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.