![]() |
![]() |
#11 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,754
|
Re: The "Hoopty Jr" Project
I cut the upper seat rail off the front side so it would not stick out too much.
Unbolted it from the truck and began the welding. Unbolted it all and welded all the pieces together. I had planned on removing the bolts after it was welded up, but my sloppy welds made that not happening, so I ground down the bolt heads on the rear of the brackets so the angle sits flush to the seat. An old piece from a squeeze mop gave its life to be the bracket for the seat adjuster cable.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 08-27-2011 at 09:30 PM. |
![]() |
![]() |
Bookmarks |
|
|