Needed: pics and info on lowering.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SEVEND2 · 08-10-2003, 05:24 AM

Coil rear suspention and blocks,, need pics of what it looks like under neath and a side shot of truck
so i can see what it might look like
size of blocks you used and etc

Thanks

Gene · 08-10-2003, 08:15 AM

3 inch blocks, sorry I dont have a shot of them under truck.

redone71 · 08-10-2003, 03:18 PM

You can see a picture of a two inch block installed at the web site below

http://www.classicperform.com/goingdown6772.htm

treefrog · 08-10-2003, 03:49 PM

Can you tell me what the height is from the ground to the center of the whell opening arch, front ans rear? That's about the stance I'm after, and I need so see what blocks to buy. Thanks. TF

Gene · 08-10-2003, 06:56 PM

Front measures 28 inches rear is 29 1/2 with 3 inch blocks and one coil cut from the front springs, on 295/50/15 inch rims.

70c10 · 08-10-2003, 08:26 PM

Gene, I love that stance man!. Just right!!!

pissonNOS · 08-11-2003, 01:00 AM

Gene how much is your front lowered?

08-10-2003, 05:24 AM	#1
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,145	Needed: pics and info on lowering.. Coil rear suspention and blocks,, need pics of what it looks like under neath and a side shot of truck so i can see what it might look like size of blocks you used and etc Thanks __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

08-10-2003, 08:15 AM	#2
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	3 inch blocks, sorry I dont have a shot of them under truck. Attached Images __________________ 1971 SWB 4X4 Build BOARD MEMBER #5448 BOOMER SOONER!!!!

08-10-2003, 03:18 PM	#3
redone71 Registered User Join Date: Jun 2003 Location: Edmond, Okla. Posts: 65	You can see a picture of a two inch block installed at the web site below http://www.classicperform.com/goingdown6772.htm __________________ On the eighth day, he made trucks and saw they were good.

08-10-2003, 03:49 PM	#4
treefrog Registered User Join Date: May 2002 Location: Knoxville, TN USA Posts: 189	Gene Can you tell me what the height is from the ground to the center of the whell opening arch, front ans rear? That's about the stance I'm after, and I need so see what blocks to buy. Thanks. TF

08-10-2003, 06:56 PM	#5
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Front measures 28 inches rear is 29 1/2 with 3 inch blocks and one coil cut from the front springs, on 295/50/15 inch rims. __________________ 1971 SWB 4X4 Build BOARD MEMBER #5448 BOOMER SOONER!!!!

08-10-2003, 08:26 PM	#6
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Gene, I love that stance man!. Just right!!! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-11-2003, 01:00 AM	#7
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Gene how much is your front lowered? __________________ 69 GMC bagged



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.