What did you get done Labor Day 2011 edition - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 09-06-2011, 11:40 AM

Quote:

Originally Posted by 383Chevy

Motor mounts done

I hope thats the "before" picture.

jitteryguy · 09-06-2011, 12:10 PM

Quote:

Originally Posted by sumran

If there are parts in those barrels, LMC should have a photographer on site documenting the delivery.

Adds a whole new dimension to "rural route".

this place define's "Rural" !, here's a picture of the town and the main mode of transpertation for the local's.

383Chevy · 09-06-2011, 01:01 PM

Quote:

Originally Posted by N2TRUX

I hope thats the "before" picture.

Nope thats the after, its a mud truck and trust me on this one. the motor isnt goin anywhere

Kerlijah · 09-06-2011, 04:26 PM

Christmas in September!! I ripped out all the vacuum and emissions crap, put on new Edelbrock valve covers and air cleaner, alternator, and a new (never used, but been sitting in a friend's shop for years) Carter carb. Carb is total crap right now, gotta take it off and rebuild it this week and get it all tuned up. Also got new headers and 3" dual exhaust, I'll be gettin that on as soon as my Flowmaster 40s get here!!

jdheff1982 · 09-06-2011, 06:09 PM

Quote:

Originally Posted by Kerlijah

Christmas in September!! I ripped out all the vacuum and emissions crap, put on new Edelbrock valve covers and air cleaner, alternator, and a new (never used, but been sitting in a friend's shop for years) Carter carb. Carb is total crap right now, gotta take it off and rebuild it this week and get it all tuned up. Also got new headers and 3" dual exhaust, I'll be gettin that on as soon as my Flowmaster 40s get here!!

Drool

81 C10AZ · 09-06-2011, 07:15 PM

Sweet!

hairlesshobo · 09-07-2011, 04:12 PM

I managed to get the 305 and th350 ripped out of my 84 SWB C10 and got the new motor and tranny almost back in (ran out of time). I am in the process of doing a swap from the 305/TH350 to a 60 over 350 4 bolt main with cam and intake and a 700R4. This motor is the one that I built for my 86 Trans Am just before I totaled it last year. I can't wait to see how she is gonna run now

foamypirate · 09-07-2011, 05:20 PM

Got some more of the junk off the firewall of my truck (tearing it down for restoration). Found some rust inside of the blower area, but shouldn't need anything more than a wirebrush and some POR-15 to take care of.

Where the rust is:

The rust itself.

camshaftgsxr · 09-07-2011, 07:00 PM

-2.5 up front sitting like a drag truck...

VegasBruce · 09-07-2011, 10:19 PM

I redid the emblem and got the grill in.

cjlinkster · 09-07-2011, 10:29 PM

I installed new plugs and wire set on the 454. The old plugs looked really worn down and caked with carbon. It was time for new plugs.

I think that I may have decided to paint my truck military Desert Tan color. Hot rod flatz has a satin desert tan paint.

My truck is factory gold and tan. I am considering painting the entire truck the desert tan color. What do you guys think?

WarBeard · 09-07-2011, 10:32 PM

It was one of the two colors I was considering when I decided to go camo.

Desert tan was a really close second!

09-06-2011, 04:26 PM	#29
Kerlijah Registered User Join Date: Feb 2011 Location: Boise, ID Posts: 293	Re: What did you get done Labor Day 2011 edition Christmas in September!! I ripped out all the vacuum and emissions crap, put on new Edelbrock valve covers and air cleaner, alternator, and a new (never used, but been sitting in a friend's shop for years) Carter carb. Carb is total crap right now, gotta take it off and rebuild it this week and get it all tuned up. Also got new headers and 3" dual exhaust, I'll be gettin that on as soon as my Flowmaster 40s get here!! Attached Images __________________ ~Wooden Indian~ 1979 C10 SWB, shaved bed rails, drip rails, tailgate handle. 350 w/ Comp cam, hydraulic lifters, Edelbrock Performer intake, Edelbrock 650 carb, Flowtech headers, Flowmaster 40s, turbo 350 w/stage 2 shift kit...so much fun!

09-06-2011, 07:15 PM	#31
81 C10AZ Registered User Join Date: Aug 2011 Location: Mesa AZ Posts: 20	Re: What did you get done Labor Day 2011 edition Sweet! __________________ 81 C10 2WD Inline 6 A/C

09-07-2011, 04:12 PM	#32
hairlesshobo Registered User Join Date: Sep 2011 Location: Jacksonville, FL Posts: 150	Re: What did you get done Labor Day 2011 edition I managed to get the 305 and th350 ripped out of my 84 SWB C10 and got the new motor and tranny almost back in (ran out of time). I am in the process of doing a swap from the 305/TH350 to a 60 over 350 4 bolt main with cam and intake and a 700R4. This motor is the one that I built for my 86 Trans Am just before I totaled it last year. I can't wait to see how she is gonna run now

09-07-2011, 05:20 PM	#33
foamypirate Registered User Join Date: Apr 2009 Location: Pflugerville, TX Posts: 594	Re: What did you get done Labor Day 2011 edition Got some more of the junk off the firewall of my truck (tearing it down for restoration). Found some rust inside of the blower area, but shouldn't need anything more than a wirebrush and some POR-15 to take care of. Where the rust is: The rust itself.

09-07-2011, 07:00 PM	#34
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: What did you get done Labor Day 2011 edition -2.5 up front sitting like a drag truck... __________________

09-07-2011, 10:19 PM	#35
VegasBruce Registered User Join Date: Apr 2011 Location: Just outside Sin City Posts: 239	Re: What did you get done Labor Day 2011 edition I redid the emblem and got the grill in. __________________ Bruce 73 Stepside, 74 Blazer, 75 1 Ton, 66 Barracuda and a 05 Electraglide DD http://i56.photobucket.com/albums/g1...Rusti192-1.jpg

09-07-2011, 10:29 PM	#36
cjlinkster Registered User Join Date: Jun 2011 Location: Atlanta ga Posts: 150	Re: What did you get done Labor Day 2011 edition I installed new plugs and wire set on the 454. The old plugs looked really worn down and caked with carbon. It was time for new plugs. I think that I may have decided to paint my truck military Desert Tan color. Hot rod flatz has a satin desert tan paint. My truck is factory gold and tan. I am considering painting the entire truck the desert tan color. What do you guys think? __________________ 1984 C20, 454, 4 speed named "Gold Member"

09-07-2011, 10:32 PM	#37
WarBeard Registered User Join Date: Jul 2008 Location: Show low,az Posts: 808	Re: What did you get done Labor Day 2011 edition It was one of the two colors I was considering when I decided to go camo. Desert tan was a really close second! __________________ 1978 C10 Silverado Big 10 350/350.. play toy 1990 V1500 Suburban 350/700r4..Daily driver 1987 K10 Silverado 383/400.. Wife's rig WRECKED! 1989 V2500 Suburban 350/400.. SOLD! 1974 C10 Custom10 LWB 350/350.. SOLD! 1974 C10 Custom10 SWB 350/400.. SOLD! 1999 Silverado Z71 LS1.. Wife's rig WRECKED! On the hunt for a new project....... I'm a Chevy guy.....I'm just not a "NEW" Chevy guy.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.