The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > Heavy Haulers

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-11-2011, 08:28 PM   #1
Livrat
Member #1049
 
Livrat's Avatar
 
Join Date: Jun 2000
Location: Troy Montana
Posts: 3,940
Re: C/60 Trim Question

From the dozen or so C40-60's I have parted out, the 67's had 3 tear drop bolt on cab light without the raised roof, 68 had 5 of the same, the 71-72's had the fireman hat lenses with the raised roof. I have seen one with factory AC and AM-FM
As far as I know they did come with the "custom appearance group" option.. which was bright grill work and stainless window moulding and chrome wing vents,
First picture is a 72 C60 I parted with the custom appearance group option, 366cu, tach/vac
Second is a 67 C50 350 cu,plain jane and third is a 68 C50, 366 cu, plain jane..

I think they could be ordered with many of the same options as the c10-30's an additionally could have air ride seats,
Another observation is in 71-72's with the 366 big block they had a fresh air vent on the drivers side of the hood and with the 427 big block had them on both sides with a "427" emblem.
Attached Images
   
Livrat is offline   Reply With Quote
Old 09-13-2011, 07:52 AM   #2
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,863
Re: C/60 Trim Question

Quote:
Originally Posted by Livrat View Post
From the dozen or so C40-60's I have parted out, the 67's had 3 tear drop bolt on cab light without the raised roof, 68 had 5 of the same, the 71-72's had the fireman hat lenses with the raised roof. I have seen one with factory AC and AM-FM
As far as I know they did come with the "custom appearance group" option.. which was bright grill work and stainless window moulding and chrome wing vents,
First picture is a 72 C60 I parted with the custom appearance group option, 366cu, tach/vac
Second is a 67 C50 350 cu,plain jane and third is a 68 C50, 366 cu, plain jane..

I think they could be ordered with many of the same options as the c10-30's an additionally could have air ride seats,
Another observation is in 71-72's with the 366 big block they had a fresh air vent on the drivers side of the hood and with the 427 big block had them on both sides with a "427" emblem.
So,that first one with the Custom appearance option had the 67/68 style "Custom" door badge? This one is like that. It has the 69/70 style C/60 badge. I wonder if 71/72s had those badges or Custom/60,etc. I must not have been paying as much attention all these years as I thought I had. I'm just curious since 89/70s designate the Custom appearance with 67/68 badges,if 71/72 is non-typical,too. Where's Too Much Stuff?? Eric,I think you had mentioned you had CST/50 or 60s?? Or some other upgrade badges? It would seem a Custom would have a fender badge like that and doesn't. I'm taking pictures today.

Oh,and what do people do with the 366 cranks?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 09-13-2011, 10:04 AM   #3
Livrat
Member #1049
 
Livrat's Avatar
 
Join Date: Jun 2000
Location: Troy Montana
Posts: 3,940
Re: C/60 Trim Question

After a second look at my other pictures, Yes first pic is a 72 C60 and it has the 67-68 "custom" door badges. Took a look thorugh a few more pictures I have and here is a C40 (not sure on the year) that looks to have the appearance group but no door badges. all the fender emblems I have ever seen are just the different years of C40, C50, C60, never a "Custom/60" etc.
I have also noticed there are different hood bowties some are flat and some are raised at the top.. (havent figured out if its a year thing or model difference)

The 366 cranks are steel and the same as a 396 and 427 car cranks
Attached Images
 
Livrat is offline   Reply With Quote
Old 09-13-2011, 07:04 PM   #4
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,709
Re: C/60 Trim Question

Tim, the only oddball big truck emblem i have is a C/50- 8-366.
Otherwise they have all been bowtie over 40,50,60 (like the 67-68) or C-40, C-50, or C-60. I have noticed the 67-68 custom upper door emblem on bigger trucks, but didn't pay attention to what years they were on. I know those emblems came in black or chrome if that means anything...
Even on my GMC emblems, after 3500 series they are just V-six, V-eight, or diesel.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 09-13-2011, 10:30 PM   #5
BLAZERMAN
Currently Blazerless
 
BLAZERMAN's Avatar
 
Join Date: Apr 2000
Location: St. Joseph Mo.
Posts: 4,826
Re: C/60 Trim Question

There use to be a pair of C/60s around here that had panoramic rear windows, both were 5th wheel trucks owned by a company that moved mobil homes.

If I had the room this 10 wheeler would be in my driveway!
http://kansascity.craigslist.org/cto/2574442880.html
__________________
1972 C/30 133" W.B. C&C
1970 GMC 3500 157" W.B. single wheel C&C
BLAZERMAN is offline   Reply With Quote
Old 09-14-2011, 07:19 AM   #6
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,863
Re: C/60 Trim Question

Quote:
Originally Posted by BLAZERMAN View Post
There use to be a pair of C/60s around here that had panoramic rear windows, both were 5th wheel trucks owned by a company that moved mobil homes.

If I had the room this 10 wheeler would be in my driveway!
http://kansascity.craigslist.org/cto/2574442880.html
That is one fine truck! It sure would take up some room,though. That's one thing I like about this one,it wouldn't take much space.

Thanks for answering these questions. This one has the Panoramic window option. It's a '69 366/5+2/air brakes. I couldn't read all the SPID. I wish it was spring time cuz I would buy it. I have to store my nuts for the winter now. This trucks is in great mechanical condition with good Michelin rubber. That baby big block purred like a kitten. Just as quiet as it could be. Here are some pictures I took:
Attached Images
     
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Last edited by special-K; 09-14-2011 at 07:37 AM.
special-K is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com