|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-04-2011, 01:00 AM
|
#1 |
|
Registered User
Join Date: Apr 2011
Location: Clifton, CO
Posts: 75
|
Which hydroboost unit for a swap?
I'm getting ready to dump the vaccum assist brakes and swap over to a hydroboost setup, but I'm not sure which of these 2 units I want. The first unit was pulled out of an '84 K20 with a 6.2 and the other unit I have came from a '78 C30 with a 350. I got the pedals and everything in between from both trucks, and it looks like it should be a straight-foward deal. The master off of the C30 is larger than the one from the K20, but the hydroboost itself from the K20 looks to be in a little better shape. Can I swap master cylinders from one to the other or will both setups be the same? The truck receiving the swap is my '83 K20.
Thanks in advance! |
|
|
|
09-04-2011, 03:38 AM
|
#2 |
|
In the Forgotten far North.
 
Join Date: Jul 2007
Location: Anchorage, Alaska
Posts: 2,627
|
Re: Which hydroboost unit for a swap?
I'd use the 84 model myself.
__________________
1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade |
|
|
|
|
09-12-2011, 01:57 AM
|
#3 |
|
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: Which hydroboost unit for a swap?
Been thinking about upgrading to hydroboost on mine, I am curious if all hydroboost units were created equal? I know master cylinders have different bore sizes, but know have found nothing about the HB units.
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
