hi from aussie - The 1947 - Present Chevrolet & GMC Truck Message Board Network

codger30 · 08-31-2011, 03:57 AM

Hi to all you guys n gals. New to the forum here. We just purchased this one owner '48 truck and plan on a pickup build. It will be our daily driver when finished.
I used to drive a rodded '37 chev sedan as a daily, then an "A" roadster as often as I could, so the '48 should be fun.
Anyhow, as I said, new to here and have found this to be a great site.
Cheers, Bryan and Angela

AUSSIE54 · 08-31-2011, 09:12 AM

G'day Codger,

She looks a real beauty!! I'll be watching with interest.
Good luck with the build!!!

**Denee007** · 08-31-2011, 09:46 AM

HI Codger, dne' here in Houston, TX! Nice flatbed!
dne'

solidaxel · 09-10-2011, 08:09 PM

Welcome from Southern Arizona !!

Keep us updated on your build.

T Hilde · 09-11-2011, 12:03 AM

Hey Codger welcome aboard. Get some interior shots for us. Never seen one with a backwards dash, well backwards from what we are use to seeing.

codger30 · 09-11-2011, 09:35 AM

Quote:

Originally Posted by T Hilde

Hey Codger welcome aboard. Get some interior shots for us. Never seen one with a backwards dash, well backwards from what we are use to seeing.

No, no,no, you guys are the backward ones. We a half a day in front of you for starters. LOL
OK, will try to get time and take some pics in the morning.Thanks for the replys.
Bryan

Lextech · 09-11-2011, 05:10 PM

Welcome from "Up Over". Someone already stole my wise crack about the steering wheel.

Jeff

Red Foreman · 09-11-2011, 05:38 PM

Nice truck & starting point, I haven't seen a right hook factory AD before, does it have a Holden id tag? Where abouts in Austalia?

codger30 · 09-12-2011, 06:33 AM

Quote:

Originally Posted by Red Foreman

Nice truck & starting point, I haven't seen a right hook factory AD before, does it have a Holden id tag? Where abouts in Austalia?

Yep, it does have a holden ID tag. Ten minutes out of Dimboola, 25 mins past Horsham.
What is an AD??? have seen the term on here a bit. While I am at it, what is the difference between the years, say '47 to '52?
It's good to get back into this chev as I drove a '37 street rodded sedan for about 6 years as my daily driver.

codger30 · 09-12-2011, 06:34 AM

another pic.

codger30 · 09-12-2011, 06:35 AM

and one more.

Red Foreman · 09-12-2011, 08:36 AM

Advance Design, with a Holden ID chances are it was built here, Fishermans Bend, Dandenong or Adelaide. I'll ask the old man if they built'em here, he worked in GM Dandenong from the 60s until 79, he might know some history on them? Cheers!

codger30 · 09-12-2011, 07:27 PM

Cool, that would be great. The old guy I bought it from has a bit of memory loss going on, & can't remember a lot about it.
Bryan

Barney Rubble · 09-13-2011, 01:15 AM

welcome codger, will be good to get daytime thread updates instead of middle of the night!

08-31-2011, 03:57 AM	#1
codger30 Registered User Join Date: Aug 2011 Location: australia Posts: 22	hi from aussie Hi to all you guys n gals. New to the forum here. We just purchased this one owner '48 truck and plan on a pickup build. It will be our daily driver when finished. I used to drive a rodded '37 chev sedan as a daily, then an "A" roadster as often as I could, so the '48 should be fun. Anyhow, as I said, new to here and have found this to be a great site. Cheers, Bryan and Angela

08-31-2011, 09:12 AM	#2
AUSSIE54 Registered User Join Date: Apr 2011 Location: Bendigo, Victoria, Australia. Posts: 164	Re: hi from aussie G'day Codger, She looks a real beauty!! I'll be watching with interest. Good luck with the build!!!

08-31-2011, 09:46 AM	#3
Denee007 Senior Member Join Date: May 2011 Location: Cypress, Tx. Posts: 1,504	Re: hi from aussie HI Codger, dne' here in Houston, TX! Nice flatbed! dne'

09-10-2011, 08:09 PM	#4
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: hi from aussie Welcome from Southern Arizona !! Keep us updated on your build. __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

09-11-2011, 12:03 AM	#5
T Hilde Registered User Join Date: Apr 2009 Location: Faribault, MN Posts: 385	Re: hi from aussie Hey Codger welcome aboard. Get some interior shots for us. Never seen one with a backwards dash, well backwards from what we are use to seeing.

09-11-2011, 05:10 PM	#7
Lextech Registered User Join Date: Jun 2008 Location: Oak Forest, Ill. Posts: 194	Re: hi from aussie Welcome from "Up Over". Someone already stole my wise crack about the steering wheel. Jeff

09-11-2011, 05:38 PM	#8
Red Foreman Registered User Join Date: Dec 2009 Location: Melbourne Australia Posts: 549	Re: hi from aussie Nice truck & starting point, I haven't seen a right hook factory AD before, does it have a Holden id tag? Where abouts in Austalia?

09-12-2011, 06:34 AM	#10
codger30 Registered User Join Date: Aug 2011 Location: australia Posts: 22	Re: hi from aussie another pic.

09-12-2011, 06:35 AM	#11
codger30 Registered User Join Date: Aug 2011 Location: australia Posts: 22	Re: hi from aussie and one more.

09-12-2011, 08:36 AM	#12
Red Foreman Registered User Join Date: Dec 2009 Location: Melbourne Australia Posts: 549	Re: hi from aussie Advance Design, with a Holden ID chances are it was built here, Fishermans Bend, Dandenong or Adelaide. I'll ask the old man if they built'em here, he worked in GM Dandenong from the 60s until 79, he might know some history on them? Cheers!

09-12-2011, 07:27 PM	#13
codger30 Registered User Join Date: Aug 2011 Location: australia Posts: 22	Re: hi from aussie Cool, that would be great. The old guy I bought it from has a bit of memory loss going on, & can't remember a lot about it. Bryan

09-13-2011, 01:15 AM	#14
Barney Rubble Registered User Join Date: Mar 2011 Location: Queensland, Australia Posts: 120	Re: hi from aussie welcome codger, will be good to get daytime thread updates instead of middle of the night!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.