Lime Wife's 67 - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hubscrub · 09-12-2011, 09:29 PM

that's my goal got to replace the rear brake lines too.

oldblue1968chevy · 09-12-2011, 11:10 PM

gf and i looked thru all the pictures hopefully we see it in person

Hubscrub · 09-13-2011, 10:03 PM

Got the rear in today with ratchet straps holding it up. installed some of the trac bar pieces. Also painted the spring cups.

oldblue1968chevy · 09-13-2011, 11:08 PM

Mrs hubscrub should be cruising safely now

Everything looks alot better nate!

Hubscrub · 09-14-2011, 06:45 PM

Got the springs mounted, shocks bolted down and the trac bar loosely mounted. Need to center the rearend to finish trac bar and brake line. (i'll be glad) I will paint the rear and such at a later time i got to get this thing going!!!!!

oldblue1968chevy · 09-14-2011, 10:45 PM

Lookin' good lookin' great!

Hubscrub · 09-17-2011, 04:50 PM

progress... OK got everything buttoned up (i think) finished trac bar tried my best to center the rear. Went to put on the rear hose and broke the hard line end off was rusted on the hose so i went to the parts store and bought some new line and replaced from the front cross member back and the rear end lines too. I used the pre made lines to the closest length they had so it's not pretty as factory but it works and is new and SAFE. (who is gonna see it anyways?)

bled brakes installed wheels and backed it out!!! Now i got to tackle and loose connection in the ing. switch PO has butt connected wires back there

wiggle the switch barely and truck will shut off. also get an alignment and tires.

Hubscrub · 09-17-2011, 04:55 PM

67chevy1series · 09-17-2011, 05:06 PM

those are fun! yeah right!

Hubscrub · 09-17-2011, 05:11 PM

Quote:

Originally Posted by 67chevy1series

those are fun! yeah right!

yea i'm glad that part is over ***i hope***

oldblue1968chevy · 09-17-2011, 05:35 PM

Hey dont be hatin on butt connectors my ign is like that too

67chevy1series · 09-17-2011, 06:00 PM

i hope its done for you to.. crawlin around under there aint fun.

Hubscrub · 09-17-2011, 06:06 PM

Quote:

Originally Posted by oldblue1968chevy

Hey dont be hatin on butt connectors my ign is like that too

solder and heat shrink

Quote:

Originally Posted by 67chevy1series

i hope its done for you to.. crawlin around under there aint fun.

wouldn't be as bad if i had some concrete

67chevy1series · 09-17-2011, 06:24 PM

i had 20 30 year old messsssed up asphault..... wasnt pleasent! concrete would have been nice!

VA72C10 · 09-17-2011, 06:50 PM

Nice work. Will be safer now too...no old lines blowing out...

oldblue1968chevy · 09-17-2011, 11:58 PM

Yeah the mrs starves him if he doesnt work on her truck!!!!!
Cant wait to see this thing on the 1st! (It is gonna be there right)?
You need to get the upper trim installed on the lemon truck! What time are you guys gonna get there and is there a 'good' place to park or what? Save me a motorcycle sized spot if you get there first this time

Hubscrub · 09-18-2011, 12:04 AM

Quote:

Originally Posted by oldblue1968chevy

Yeah the mrs starves him if he doesnt work on her truck!!!!!
Cant wait to see this thing on the 1st! (It is gonna be there right)?
You need to get the upper trim installed on the lemon truck! What time are you guys gonna get there and is there a 'good' place to park or what? Save me a motorcycle sized spot if you get there first this time

I'm gonna try to get it there the biggest hurdle will be finding the time to get an alignment.

oldblue1968chevy · 09-18-2011, 12:19 AM

Schedule it in during lunchbreak? It tookem like 30 minutes to do my blue junker.

Hubscrub · 09-18-2011, 07:39 PM

guess i will update while waiting on my chicken nachos and jalapeños

installed a new ing switch and fixed the cutting out problem so far.
Posted via Mobile Device

Hubscrub · 09-18-2011, 10:15 PM

Quote:

Originally Posted by oldblue1968chevy

Schedule it in during lunchbreak? It tookem like 30 minutes to do my blue junker.

I will just have to drop it off one day and let them have it so they can get to it, but finding that day is hard sometimes with going in to work early mornings.

oldblue1968chevy · 09-18-2011, 10:39 PM

Have the wife do field trip day and take the kiddos to a alignment shop

67chevy1series · 09-19-2011, 12:35 AM

^^^^ lol come get my 67 and take it with her 67 to get alignment done! of course it will put just a little more miles to get mine but not that many lol

Hubscrub · 09-22-2011, 10:00 PM

well i worked to center rear and think i'm good also got the wiper switch located to the other side with the harness i make and she works!

67chevy1series · 09-22-2011, 10:55 PM

my wipers work..... for my left turn signal!

Hubscrub · 09-26-2011, 09:50 PM

Got good news and stupid news.

Good news is its drivable now with a alignment and new tires, i drove it to the shop today (i took a day off today to rest from our weekend trip) and the tires were literally squealing down the road

Stupid news i didn't double check the center link the po had it back wards (this has bit me once on my truck so you would think i would notice)

i'm pretty down about it.
so i have to fix it and get the alignment rechecked sometime. But i can drive it drives good notice it most at high speeds. @ Oldblue1968chevy i do plan to have it in lynchburg this weekend.

09-12-2011, 09:29 PM	#401
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 that's my goal got to replace the rear brake lines too. __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-12-2011, 11:10 PM	#402
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lime Wife's 67 gf and i looked thru all the pictures hopefully we see it in person __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-13-2011, 10:03 PM	#403
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 Got the rear in today with ratchet straps holding it up. installed some of the trac bar pieces. Also painted the spring cups. Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-13-2011, 11:08 PM	#404
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lime Wife's 67 Mrs hubscrub should be cruising safely now Everything looks alot better nate! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-14-2011, 06:45 PM	#405
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 Got the springs mounted, shocks bolted down and the trac bar loosely mounted. Need to center the rearend to finish trac bar and brake line. (i'll be glad) I will paint the rear and such at a later time i got to get this thing going!!!!! Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-14-2011, 10:45 PM	#406
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lime Wife's 67 Lookin' good lookin' great! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-17-2011, 04:50 PM	#407
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 progress... OK got everything buttoned up (i think) finished trac bar tried my best to center the rear. Went to put on the rear hose and broke the hard line end off was rusted on the hose so i went to the parts store and bought some new line and replaced from the front cross member back and the rear end lines too. I used the pre made lines to the closest length they had so it's not pretty as factory but it works and is new and SAFE. (who is gonna see it anyways?) bled brakes installed wheels and backed it out!!! Now i got to tackle and loose connection in the ing. switch PO has butt connected wires back there wiggle the switch barely and truck will shut off. also get an alignment and tires. Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-17-2011, 04:55 PM	#408
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-17-2011, 05:06 PM	#409
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Lime Wife's 67 those are fun! yeah right!

09-17-2011, 05:35 PM	#411
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lime Wife's 67 Hey dont be hatin on butt connectors my ign is like that too __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-17-2011, 06:00 PM	#412
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Lime Wife's 67 i hope its done for you to.. crawlin around under there aint fun.

09-17-2011, 06:24 PM	#414
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Lime Wife's 67 i had 20 30 year old messsssed up asphault..... wasnt pleasent! concrete would have been nice!

09-17-2011, 06:50 PM	#415
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Lime Wife's 67 Nice work. Will be safer now too...no old lines blowing out... __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-17-2011, 11:58 PM	#416
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lime Wife's 67 Yeah the mrs starves him if he doesnt work on her truck!!!!! Cant wait to see this thing on the 1st! (It is gonna be there right)? You need to get the upper trim installed on the lemon truck! What time are you guys gonna get there and is there a 'good' place to park or what? Save me a motorcycle sized spot if you get there first this time __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-18-2011, 12:19 AM	#418
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lime Wife's 67 Schedule it in during lunchbreak? It tookem like 30 minutes to do my blue junker. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

09-18-2011, 07:39 PM	#419
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 guess i will update while waiting on my chicken nachos and jalapeños installed a new ing switch and fixed the cutting out problem so far. Posted via Mobile Device __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-18-2011, 10:39 PM	#421
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Lime Wife's 67 Have the wife do field trip day and take the kiddos to a alignment shop __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-19-2011, 12:35 AM	#422
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Lime Wife's 67 ^^^^ lol come get my 67 and take it with her 67 to get alignment done! of course it will put just a little more miles to get mine but not that many lol

09-22-2011, 10:00 PM	#423
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 well i worked to center rear and think i'm good also got the wiper switch located to the other side with the harness i make and she works! __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-22-2011, 10:55 PM	#424
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Lime Wife's 67 my wipers work..... for my left turn signal!

09-26-2011, 09:50 PM	#425
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Lime Wife's 67 Got good news and stupid news. Good news is its drivable now with a alignment and new tires, i drove it to the shop today (i took a day off today to rest from our weekend trip) and the tires were literally squealing down the road Stupid news i didn't double check the center link the po had it back wards (this has bit me once on my truck so you would think i would notice) i'm pretty down about it. so i have to fix it and get the alignment rechecked sometime. But i can drive it drives good notice it most at high speeds. @ Oldblue1968chevy i do plan to have it in lynchburg this weekend. Attached Images __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14 Last edited by Hubscrub; 09-27-2011 at 06:27 AM.

Register or Log In To remove these advertisements.