Quick C60 question.

[A.T. RockDriller]

I agree with the Captain....as far as the I-6's go..
But somewhere in my memory banks.....back in the late '70's , I did a V-8 swap in a C-6o, and that one had the two bell housing mounts and one in the front center under the harmonic balancer....

Or maybe I was smokin the "Tall Grass" and just thought that's what I saw...

[Captainfab]

I'm not sure on that. But if it has a small block in it currently, your '70's engine will bolt right in. However if that V8 happens to be a 348/409, then you would have to come up with a small block front saddle, if that is the style it has.

Originally Posted by sdkid

Also just found out its a 1960. Will it have the side mounts then?

In the early '70's GM went to the front saddle type motor mount in the medium duty trucks.

Originally Posted by A.T. RockDriller

I agree with the Captain....as far as the I-6's go..
But somewhere in my memory banks.....back in the late '70's , I did a V-8 swap in a C-6o, and that one had the two bell housing mounts and one in the front center under the harmonic balancer....

Or maybe I was smokin the "Tall Grass" and just thought that's what I saw...