KS parting a 70 chevy 6 cyl/4 speed and posi - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chris_C · 09-21-2011, 07:45 PM

Is the grill sold? if not how much shipped to 75703?

teeitup · 09-21-2011, 10:13 PM

bmfm64, the only thing left off aux gas tank stuff is switch only

Wideside72, Steve, this one is bent up, sorry

69truck, this posi is sold, but I have another one out of a 67 1/2 12 bolt rear end $225 picked up

Bollybib, I'll try to get some for you

Chris_C. sorry it was picked up today

Thanks Randy

**too much stuff** · 09-21-2011, 11:32 PM

Randy, overall condition of the 292 emblem? Good studs? Looks like some pitting on top.
Also, i think it was krue maybe that had a wtb for a gauge bezel like you have pictured.

Davedr · 09-22-2011, 10:56 PM

Do you have side marker housings?

teeitup · 09-23-2011, 04:11 PM

Eric, a little pitting on top, studs are good. I'll see if I can see who was wanting one of these bezels, Thanks

Dave, what are you needing for sure the side markers?

Thanks Randy

Davedr · 09-24-2011, 01:47 AM

I need the wire that holds the bulb for the front and back side markers.

teeitup · 09-24-2011, 08:35 AM

I can cut them off and you'd have to splice in. Thanks Randy

Prathbun · 09-24-2011, 05:39 PM

How is the heater box on this truck?? I need one for 70-72 WO a/c. I don't need the core or the fan. I need one that matches up to the plastic inner heater box if it matters.

Thanks

teeitup · 09-24-2011, 11:47 PM

Perry, I have a good one out there $20 plus shipping, I'll get pics Sun morn. Thanks Randy

Prathbun · 09-25-2011, 10:54 AM

Quote:

Originally Posted by teeitup

Perry, I have a good one out there $20 plus shipping, I'll get pics Sun morn. Thanks Randy

I'll take it pending pics and shipping to 63901. I will also need a good "squirrel cage" part of the fan if you have one.

Thanks Randy!!!

47thriftmaster · 09-25-2011, 01:29 PM

Randy,
Looking for these parts off a rear drum brake, could use both sides if you have some. Shoe guides, Parking Brake Lever, and the retainer nut that bolts to the backing plate. As always thank you for the help.

teeitup · 09-25-2011, 03:24 PM

Perry, here is the best one I have

teeitup · 09-25-2011, 03:26 PM

Monte, sorry I don't have rearends I'm parting right now. Thanks Randy

Prathbun · 09-25-2011, 04:12 PM

Randy,
I can't really tell but if this thing is not rusted out and I can add better seals, I'll take it.

PM Sent.

Thanks!!

09-21-2011, 07:45 PM	#76
Chris_C Registered User Join Date: Sep 2011 Location: Tyler, Texas Posts: 20	Re: parting a 70 chevy 6 cyl/4 speed and posi Is the grill sold? if not how much shipped to 75703?

09-21-2011, 10:13 PM	#77
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 70 chevy 6 cyl/4 speed and posi bmfm64, the only thing left off aux gas tank stuff is switch only Wideside72, Steve, this one is bent up, sorry 69truck, this posi is sold, but I have another one out of a 67 1/2 12 bolt rear end $225 picked up Bollybib, I'll try to get some for you Chris_C. sorry it was picked up today Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 11:32 PM	#78
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: parting a 70 chevy 6 cyl/4 speed and posi Randy, overall condition of the 292 emblem? Good studs? Looks like some pitting on top. Also, i think it was krue maybe that had a wtb for a gauge bezel like you have pictured. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

09-22-2011, 10:56 PM	#79
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: parting a 70 chevy 6 cyl/4 speed and posi Do you have side marker housings?

09-23-2011, 04:11 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 70 chevy 6 cyl/4 speed and posi Eric, a little pitting on top, studs are good. I'll see if I can see who was wanting one of these bezels, Thanks Dave, what are you needing for sure the side markers? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-24-2011, 01:47 AM	#81
Davedr Registered User Join Date: Sep 2010 Location: Dallas,Tx Posts: 202	Re: parting a 70 chevy 6 cyl/4 speed and posi I need the wire that holds the bulb for the front and back side markers.

09-24-2011, 08:35 AM	#82
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 70 chevy 6 cyl/4 speed and posi I can cut them off and you'd have to splice in. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-24-2011, 05:39 PM	#83
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: parting a 70 chevy 6 cyl/4 speed and posi How is the heater box on this truck?? I need one for 70-72 WO a/c. I don't need the core or the fan. I need one that matches up to the plastic inner heater box if it matters. Thanks __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

09-24-2011, 11:47 PM	#84
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 70 chevy 6 cyl/4 speed and posi Perry, I have a good one out there $20 plus shipping, I'll get pics Sun morn. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 01:29 PM	#86
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: parting a 70 chevy 6 cyl/4 speed and posi Randy, Looking for these parts off a rear drum brake, could use both sides if you have some. Shoe guides, Parking Brake Lever, and the retainer nut that bolts to the backing plate. As always thank you for the help.

09-25-2011, 03:24 PM	#87
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 70 chevy 6 cyl/4 speed and posi Perry, here is the best one I have Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 03:26 PM	#88
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 70 chevy 6 cyl/4 speed and posi Monte, sorry I don't have rearends I'm parting right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 04:12 PM	#89
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: parting a 70 chevy 6 cyl/4 speed and posi Randy, I can't really tell but if this thing is not rusted out and I can add better seals, I'll take it. PM Sent. Thanks!! __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.