1992 GMC Sierra K1500 Shortwide Z71 Conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

89chevsj · 09-27-2011, 10:06 PM

yes it would, I was originally gonna do that aswell but min is a 4wd so I couldn't fit it. but you should be able to. how many speakers are going in it? and you might want to consider an amp.

Dub_X · 09-28-2011, 10:08 AM

Quote:

Originally Posted by 89chevsj

yes it would, I was originally gonna do that aswell but min is a 4wd so I couldn't fit it. but you should be able to. how many speakers are going in it? and you might want to consider an amp.

Just 2. 6 x 9 in. And I don't have money for an amp lol otherwise I would.

Dub_X · 10-16-2011, 12:57 PM

Okay, I have a question for all of you guys that like your trucks low in the front and high in the back like me. I'm planning on lifting the back of the '92 two to three inches...but I'm not sure how much of a drop I should give it. I was thinking of replacing the front coil springs first, because one side is lower than the other due to the springs being heated, and I want the front even before I drop it. So, my question is, with 2-3 inches up in the back, how much do you think I should drop it in the front? This is a thought for the future, not anytime soon as I don't have the money.

09-27-2011, 10:06 PM	#1
89chevsj error 404 Join Date: Oct 2010 Location: soldotna alaska Posts: 1,252	Re: '92 GMC Southern Comfort Daily Driver yes it would, I was originally gonna do that aswell but min is a 4wd so I couldn't fit it. but you should be able to. how many speakers are going in it? and you might want to consider an amp. __________________ 89 Chevy swb 350 "SJ" DD turned parts truck. SOLD 90 Chevy ext cab loooongbed. "storm trooper" Rust In Peace. 06 Kia sorento wife's car 06 charger srt8 "lucifer" my toy '12 Kia optima

10-16-2011, 12:57 PM	#3
Dub_X Professional Crow Bar Tosser Join Date: Dec 2010 Location: Fairview, Missouri [Joplin Area] Posts: 872	Re: '92 GMC Southern Comfort Daily Driver Okay, I have a question for all of you guys that like your trucks low in the front and high in the back like me. I'm planning on lifting the back of the '92 two to three inches...but I'm not sure how much of a drop I should give it. I was thinking of replacing the front coil springs first, because one side is lower than the other due to the springs being heated, and I want the front even before I drop it. So, my question is, with 2-3 inches up in the back, how much do you think I should drop it in the front? This is a thought for the future, not anytime soon as I don't have the money. __________________ Will My Beast "Big Nasty": '92 GMC Sierra K1500 Ext. Cab L31 Swap 4x4 Conversion: 2" Body Lift, 3" Skyjacker Suspension Lift, 9.5" 14-Bolt G80 Rear, 3:73 Gears, 350cid L31 Vortec 5700, 4L60-E Overdrive Automatic My Dad's Beast: CUSTOM '97 Chevrolet Silverado K3500 4-Door Mega Cab Project: 10.5" 14-Bolt G80 Rear, 4:10 Gears, 5.7L 350cid SBC Vortec, 4L80-E Overdrive Automatic "I'd rather PUSH my Chevy than DRIVE your Ford!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.