|
09-29-2011, 03:20 PM
|
#1 |
|
Registered User
Join Date: Apr 2009
Location: new britain , ct.
Posts: 19
|
Jeep 5 on 5 wheel ?
Does anyone know if jeep wheels from a newer Cherokee or wrangler with the 5 on 5 bolt pattern will fit? I know it's the same bolt pattern as a 2wd gm but what about the hub bore. Thinking on putting srt 20x9 +35 offset and 20x10 +50 offset repo ram viper wheels that they sell on eBay on my stepside.
[ Last edited by lifted k10; 09-29-2011 at 03:23 PM. Reason: Forgot to add some info |
|
|
|
09-29-2011, 04:02 PM
|
#2 |
|
Registered User
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
|
Re: Jeep 5 on 5 wheel ?
Newer wheels use more backspacing than older ones. If they do bolt on, they will be tucked into the fenders quite a bit. Just to give you an idea, a stock 8" wide rim has a backspacing of 4". Not sure what your new wheels are but you can compare it to that baseline.
__________________
1977 GMC Sierra Grande |
|
|
|
|
09-29-2011, 04:24 PM
|
#3 |
|
Registered User
Join Date: Apr 2009
Location: new britain , ct.
Posts: 19
|
Re: Jeep 5 on 5 wheel ?
So basically with the correct spacers I could probably get them flush with the fenders
Posted via Mobile Device |
|
|
|
|
09-29-2011, 11:12 PM
|
#4 |
|
Registered User
Join Date: Dec 2009
Location: Snohomish, Washington
Posts: 1,187
|
Re: Jeep 5 on 5 wheel ?
Jeep wheels have smaller hub bores, the wheels will not bolt on unless you machine your hubs or wheels. If you have spacers/adapters made you can make sure they are hub and wheel centric. www.motorsport-tech.com
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
