|
10-02-2011, 11:44 AM
|
#1 |
|
Senior Member
 Join Date: Jun 2011
Location: ST LOUIS MO
Posts: 2,113
|
High hump change over
What is the best way to convert a low hump cab to a high hump so it looks facyory ??
|
|
|
|
10-02-2011, 05:22 PM
|
#2 |
|
Registered User
Join Date: Oct 2007
Location: Wendell, Idaho
Posts: 608
|
Re: High hump change over
I got a high hump from a donor cab, it unbolted, then set it over the low hump and traced the outline and the bolt holes. I then made a card board template of the flange and set it inside the outline I traced on the low hump. I traced this template and cut the inside line with a cut off wheel, drilled out the bolt holes, welded some nuts to the underside and bolted the high hump on. It looks pretty good in my opinion.
__________________
1969 4x4 Nothing beats a good rock drill and some dynamite |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
