KS 72 cheyenne getting parted now - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hubscrub · 10-02-2011, 09:02 PM

The column and sway bar arrived a few days ago thanks for taking the time to do this for us and the care in packaging and when you send a part you get all the "other" parts thats great.

oldblue1968chevy · 10-02-2011, 09:56 PM

How much for the pieces you have? And they ARE designed to run the wires under the manifolds?

teeitup · 10-02-2011, 10:01 PM

Bryankichler, glad your happy with it and it got there safely, THANKS

Hubscrub, THANK YOU for the kind words!!!!

Oldblue, John, are you needing all the plug heat shields and holders or just the small lower holders and 2 holders on rear of motor? I can get pics Mon after work

Thanks Randy

oldblue1968chevy · 10-02-2011, 10:48 PM

This is how I wanna run my wires, I bought vette wires for a 76 vette

I'll take what I can get? LOL

Bears63 · 10-03-2011, 09:40 AM

Randy, do you still have the water pump pulley, crankshaft pulleys, fan, and spacer?

**Cash3481** · 10-03-2011, 10:42 AM

Randy,
I'm looking for trans linkage for my 72 402/400 BBC swb truck and also the rear drive shaft from the carrier bearing to the rear end. Let me know if you have either of them and I can drive up there and get them from you. If you only have the trans linkage I will have you ship it to me.
Thanks in advance!
Cash3481

m6z · 10-03-2011, 11:02 AM

Quote:

Originally Posted by teeitup

m6z, pic of numbers

thanks. After talking to my Holley 'guy' He's advised me not to buy a vacuum secondary carb, so I'm going to pass.

**72peace** · 10-03-2011, 11:11 AM

Randy,

I'm looking for the couple of screws and sleeves that go in the door under the vent windows just on 72's, the P/O removed them to paint and never put them back. I can't find them on any parts site.

Thanks,

teeitup · 10-03-2011, 01:37 PM

Oldblue, John, I'll get pics of what I have tonight

Bears63, I have all the pullies but sold the fan already. Pics tonight

Cash3481, Mike, I don't think I have any of that right now but will look tonight

m6z, no problem

72peace, I should have those, I'll look tonight

Thanks Randy

Bears63 · 10-03-2011, 01:51 PM

The fan isn't a big deal, I think I have one anyway. The big thing is the pullies. I need those desperately. I saw them in the pics from the beginning of the post, they are precisely what I need. Just let me know how much plus the trip and where to send the money order. Thanks.

teeitup · 10-03-2011, 09:58 PM

here ya go Bear

teeitup · 10-03-2011, 09:59 PM

Oldblue, John, here is what I have, missing 2 of the small ones

teeitup · 10-03-2011, 10:01 PM

72peace, here ya go

RANDOMIZM · 10-03-2011, 10:06 PM

Hey, do you have the drivers door hinges for sale? if so, how much?

teeitup · 10-03-2011, 10:10 PM

I should have some more good ones out there, I'll need to look though. $21 shipped a pair. Thanks Randy

**72peace** · 10-03-2011, 10:28 PM

Quote:

Originally Posted by teeitup

72peace, here ya go

You are the man, how much shipped to 68123?

Cheers,

oldblue1968chevy · 10-03-2011, 10:49 PM

So your missing 2 pieces?

What're the things that arent wire holders? Heat shields I assume? How much for what you've got? And these are correct for running the wires under the manifolds?

RANDOMIZM · 10-04-2011, 02:34 AM

alright. PM me if you do end up having a pair of solid drivers hinges. Thanks!

teeitup · 10-04-2011, 07:40 AM

72Peace, $8 shipped for the pair

John, yes missing the 2 lower little ones, yes heat shields and yes correct for running the wires under manifold $21 shipped for all

Randomizm. I'll check tonight

Thanks Randy

Bears63 · 10-04-2011, 09:17 AM

I will take the pullies. Do you take PayPal? Let me know the total with shipping to 57201 and I will get the money to you. Thanks.

**72peace** · 10-04-2011, 09:53 AM

Randy,

I'll take them, send me your payment info.

Cheers,

burb71 · 10-05-2011, 11:00 AM

Randy one more thing I need... a patch panel of the rear pass side of the bed side.
Say about a 12" inch long and full top to bottom rear bed section, from the rear lights forward to inside the bed about 12".

Also please send pics and price of the step bumper you have.
Thanks, Steve

10-02-2011, 09:02 PM	#176
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: 72 cheyenne getting parted now The column and sway bar arrived a few days ago thanks for taking the time to do this for us and the care in packaging and when you send a part you get all the "other" parts thats great. __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

10-02-2011, 09:56 PM	#177
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 72 cheyenne getting parted now How much for the pieces you have? And they ARE designed to run the wires under the manifolds? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-02-2011, 10:01 PM	#178
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now Bryankichler, glad your happy with it and it got there safely, THANKS Hubscrub, THANK YOU for the kind words!!!! Oldblue, John, are you needing all the plug heat shields and holders or just the small lower holders and 2 holders on rear of motor? I can get pics Mon after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2011, 10:48 PM	#179
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 72 cheyenne getting parted now This is how I wanna run my wires, I bought vette wires for a 76 vette I'll take what I can get? LOL Attached Images __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

10-03-2011, 09:40 AM	#180
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 72 cheyenne getting parted now Randy, do you still have the water pump pulley, crankshaft pulleys, fan, and spacer? __________________ Mike "Bear" Shea

10-03-2011, 10:42 AM	#181
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: 72 cheyenne getting parted now Randy, I'm looking for trans linkage for my 72 402/400 BBC swb truck and also the rear drive shaft from the carrier bearing to the rear end. Let me know if you have either of them and I can drive up there and get them from you. If you only have the trans linkage I will have you ship it to me. Thanks in advance! Cash3481

10-03-2011, 11:11 AM	#183
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: 72 cheyenne getting parted now Randy, I'm looking for the couple of screws and sleeves that go in the door under the vent windows just on 72's, the P/O removed them to paint and never put them back. I can't find them on any parts site. Thanks,

10-03-2011, 01:37 PM	#184
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now Oldblue, John, I'll get pics of what I have tonight Bears63, I have all the pullies but sold the fan already. Pics tonight Cash3481, Mike, I don't think I have any of that right now but will look tonight m6z, no problem 72peace, I should have those, I'll look tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-03-2011, 01:51 PM	#185
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 72 cheyenne getting parted now The fan isn't a big deal, I think I have one anyway. The big thing is the pullies. I need those desperately. I saw them in the pics from the beginning of the post, they are precisely what I need. Just let me know how much plus the trip and where to send the money order. Thanks. __________________ Mike "Bear" Shea

10-03-2011, 09:58 PM	#186
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now here ya go Bear Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-03-2011, 09:59 PM	#187
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now Oldblue, John, here is what I have, missing 2 of the small ones Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-03-2011, 10:01 PM	#188
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now 72peace, here ya go Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-03-2011, 10:06 PM	#189
RANDOMIZM Registered User Join Date: Apr 2009 Location: Seattle, WA Posts: 85	Re: 72 cheyenne getting parted now Hey, do you have the drivers door hinges for sale? if so, how much? __________________ Build Thread: Frankenburb .._________ /____\|__\|__\___ l__(o)______(O)_l Cruizin' Thru... Low N Slow

10-03-2011, 10:10 PM	#190
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now I should have some more good ones out there, I'll need to look though. $21 shipped a pair. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-03-2011, 10:49 PM	#192
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 72 cheyenne getting parted now So your missing 2 pieces? What're the things that arent wire holders? Heat shields I assume? How much for what you've got? And these are correct for running the wires under the manifolds? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4



Register or Log In To remove these advertisements.

10-04-2011, 02:34 AM	#193
RANDOMIZM Registered User Join Date: Apr 2009 Location: Seattle, WA Posts: 85	Re: 72 cheyenne getting parted now alright. PM me if you do end up having a pair of solid drivers hinges. Thanks! __________________ Build Thread: Frankenburb .._________ /____\|__\|__\___ l__(o)______(O)_l Cruizin' Thru... Low N Slow

10-04-2011, 07:40 AM	#194
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now 72Peace, $8 shipped for the pair John, yes missing the 2 lower little ones, yes heat shields and yes correct for running the wires under manifold $21 shipped for all Randomizm. I'll check tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-04-2011, 09:17 AM	#195
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 72 cheyenne getting parted now I will take the pullies. Do you take PayPal? Let me know the total with shipping to 57201 and I will get the money to you. Thanks. __________________ Mike "Bear" Shea

10-04-2011, 09:53 AM	#196
72peace Senior Member Join Date: Jan 2011 Location: Bellevue, NE Posts: 712	Re: 72 cheyenne getting parted now Randy, I'll take them, send me your payment info. Cheers,

10-05-2011, 11:00 AM	#197
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: 72 cheyenne getting parted now Randy one more thing I need... a patch panel of the rear pass side of the bed side. Say about a 12" inch long and full top to bottom rear bed section, from the rear lights forward to inside the bed about 12". Also please send pics and price of the step bumper you have. Thanks, Steve

Register or Log In To remove these advertisements.