The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 GMT800 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-25-2011, 05:40 PM   #1
Nima
Blue 67
 
Join Date: Apr 2004
Location: Western WA
Posts: 1,175
Doesn't want to turn left

Hi guys:
This is a 2005 chevy D-max. In stand still, I can move the steering wheel to right normally but I can not (I CAN NOT) turn it to the left!. If truck is moving I can turn it to left but not easy/smoothly. I flushed the P/S system. I jacked up the front and except for the tear in pitman arm rubber boot, I didn't see or feel any paly or slack. When the front was in the air, I didn't have any problem to move the steering wheel to left or right. is it just the pitman arm has failed? Any ideas? Could it be the steering box or something else?
I disconnected the steering stabilizer while truck was on the ground in hope that is the culprit, no luck. Still doesn't want to turn left. I lifted the front again and as soon as tires clear the ground, steering wheel is noraml? I don't see any binding, anything.
I guess if nobody has any ideas I have to start changing parts. My original plan was to change/upgrade the pitman/idler arms and put cognito braces on them. Now I am thinking to change the steering box since that could be the only/main cause. Is there anybody here has knowledge about the internal of steering gear boxes? How the internal work? Is there any left and right vlave or something which can fail seperately? Why is it haapen under the load only?
I know, long thread and too many questions. Any help would be appreciated.
Thanks
__________________
1953 GMC 3/4 ton: current project
1967 C20: 5.3 voretc with T5 conversion, 4 wheel 8 lug disc brake
1972 Nova: my 4 door sport sedan! 5.3 voretc + T5 conversion. drivable project, FUN!!
1979 Camaro Z28: 5.3 vortec conversion with build TH350: drivable project, Fun to drive
1992 Camaro RS convertible (Z28 clone): 5.3 conversion with build T5: on going project
2005 Silverado 2500, 4x4 Duramax, original owner
Nima is offline   Reply With Quote
Old 09-26-2011, 09:52 AM   #2
truckdude239
Senior Member
 
truckdude239's Avatar
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,230
Re: Doesn't want to turn left

sounds like a bad gear box or rack and pinion
__________________
David fuller
Ase Certified Mechanic
Click here to help support our board!!


1971 Chevy c-10 under going a 4.8l LSx swap

Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305

2007 Honda Accord my daily 145kmiles
2002 Honda Accord 4 door With 330k(sisters car)
2005 toyota Avalon 228k( brothers car)
2002 Sububran 5.3 245k
2000 Tahoe 5.3l 378

General manager for Marco's Carwash & lube
truckdude239 is offline   Reply With Quote
Old 10-05-2011, 08:52 PM   #3
chinquipin
Registered User
 
Join Date: Jun 2011
Location: East Tennessee
Posts: 35
Re: Doesn't want to turn left

my 06 1500 got hard to turn to the left (but not imposssible) and would make a noise that seemed to be coming from the power steering pump. It ended up being the gear box. They had one in stock at the parts store so i assume it's not a uncommon problem, but that was for a 1500 so i figure yours has a different gear box? Good luck
chinquipin is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com