The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-17-2003, 03:48 PM   #1
J
Registered User
 
J's Avatar
 
Join Date: Oct 2001
Location: Yuma, AZ
Posts: 164
Help with wiring??????

Hello all,
Got pulled over for not having any brake lights. I tested the little switch under the pedal and the bulbs, they are fine. The hazards are not working on the back end either. Everything up front works fine. It is just the brakes and hazards on the back. The hazard relay is new so it is not that. Does anyone have any advice? Maybe a wiring diagram? Thanks
__________________
'72 C-10
'99 Silverado
'91 S-Dime
J is offline   Reply With Quote
Old 08-17-2003, 03:56 PM   #2
jef5150
Inline 69
 
jef5150's Avatar
 
Join Date: Apr 2003
Location: valleysprings,california
Posts: 1,018
rear wiring

hope it helps,,,i have dash panel,and engine compartment if u need them also,,,,jeff
Attached Images
 
jef5150 is offline   Reply With Quote
Old 08-17-2003, 03:58 PM   #3
jef5150
Inline 69
 
jef5150's Avatar
 
Join Date: Apr 2003
Location: valleysprings,california
Posts: 1,018
do your dash lights work??????/
jef5150 is offline   Reply With Quote
Old 08-17-2003, 04:00 PM   #4
Longhorn Man
its all about the +6 inches
 
Longhorn Man's Avatar
 
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
Your blinkers are working up front?
If there is no blinkers, i say look for a fuse, and if the fuse is good, you may be looking at a turn signal switch.
If they do blink up front, and the parking lights in back still work, then it will be a wireing problem, and probably not a ground issue. Try looking a the Dark green wire, and the yellow wire on the harness. I would start under the rear bumper. It has probably been spliced a 1/2 billion times for trailer harnesses.
Longhorn Man is offline   Reply With Quote
Old 08-17-2003, 04:45 PM   #5
ddsmith
Glowing since 1978
 
ddsmith's Avatar
 
Join Date: Mar 2001
Location: Lusby,MD,USA
Posts: 532
You can take a look at the firewall connector. Should have DG,LG,BRN, and Y wires coming out of it. I think this connector easily came off on the inside of the truck when I was doing my A/C install. The inside connector is just above the gas pedal to the right.
__________________
66 Chevy C30 Stakebody Dump, PS,PB, 327cu in
71 Corvette Coupe 454 4 speed
69 Chevy C20 Custom Camper
ddsmith is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com