Glove box door mounting

[srziemkowski]

Anyone have some pictures of glove box door mounting for 64-66,mine did not have one and recently got one from a member here and need to see what mounting hardware it uses to mount it. Any help would be appretiated.

[dthela]

hinge along bottom and two brackets that slide into slots in dash then screw onto door

[srziemkowski]

Originally Posted by dthela

hinge along bottom and two brackets that slide into slots in dash then screw onto door

the hinges are still mounted on the door i got,just wondering what type screws hold the hinge to the dash

[chemlab]

i used allen head bolts that i painted black, forget the bolt size tho... around 1/8 i think. same size bolt as the door pannels i believe.

[jimmydean]

Originally Posted by chemlab

i used allen head bolts that i painted black, forget the bolt size tho... around 1/8 i think. same size bolt as the door pannels i believe.

I think they are smaller. I converted my door panels to use allens but the glove box uses some smaller ones.

[srziemkowski]

I think im going to try this j nut and screw setup, i have a bin of some new ones. To mount the hinge to the dash on the sides of the box door.

[dthela]

takes 1/4-20 by 3/8 hex heads. should be weld nuts behind dash holes, retap them first!!!!!!

[dthela]

the screws that hold the brakets to the door have a flange built into them.

[dthela]

you're welcome