CA 67 Doors ready to install - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gus67 · 10-04-2011, 02:43 PM

I have a pair of 67 doors that are primed and ready for paint, they are the original doors not repops. they have been fixed and primed and i do have the original glass also. looking for $450.00 for the pair including glass. make an offer.

Edit- found out this morning it will be cheaper if i use greyhound, hope that helps interest a little more. will be alot cheaper to ship.

These Doors are sold.

mahanian · 10-04-2011, 04:13 PM

Do you have any before pictures?

gus67 · 10-04-2011, 04:49 PM

i do, but those were taken with a film camera, so i would need to scan them first.

**WETOWM** · 10-04-2011, 04:53 PM

What shape where they in before the body work ? Also dont need the glass and last can you ship these ?

gus67 · 10-04-2011, 05:27 PM

they had little pin holes on the bottom of the doors, i can sure find out for you how much it would cost to ship. i don't mind shipping these at all.

*Shane* · 10-04-2011, 05:29 PM

get me a quote to ship to 35611 ... don't need the glass

gus67 · 10-04-2011, 05:46 PM

i got a quote for $275.00 to that zip code

speedfreak369 · 10-04-2011, 09:02 PM

whats a quote to 30153

gus67 · 10-05-2011, 12:04 AM

into rockmouth,ga they quoted me 325.00,but if you willing to drive to atlanta they would charge me around 275.00

HeavyMetalChevy · 10-05-2011, 12:25 AM

Quote:

Originally Posted by gus67

I have a pair of 67 doors that are primed and ready for paint, they are the original doors not repops. they have been fixed and primed and i do have the original glass also. looking for $450.00 for the pair including glass. make an offer.

by glass you mean including vent window assemblies?

jessewebb · 10-05-2011, 07:48 AM

can you ship greyhound or give me a shipping quote to 25801 WV.

gus67 · 10-05-2011, 11:08 AM

never have done greyhound, kind of worried they would get damaged but i could find out, the company i would use to ship is quoting me 450 bucks.

jessewebb · 10-05-2011, 12:41 PM

Sheew, thats the problem, the shipping. the cost to ship is crazy anymore. Id sure could use them. I had some inner fender's ship from CA. through greyhound I dont know how they were wrapped or what, they made it though wrapping looked rough. but they were used. I really don't know how they looked when they were shipped. $60 though a lot cheaper....

gus67 · 10-05-2011, 12:52 PM

jessewebb let me look into the greyhound thing, i would really hate to see these doors get damaged, are you also looking into the glass or you don't need the glass.

jessewebb · 10-05-2011, 01:07 PM

just the doors. thanks

gus67 · 10-05-2011, 01:18 PM

greyhound quote was $110.00 dollars, just let me know what is closer to you, charleston or bluefield

jessewebb · 10-05-2011, 02:03 PM

Bluefield is the closer. Charleston may be a better choice though. It takes about the same time for me to get to either drop off. I'll PM, see if we can work something up. I have some business to take care of today. It'll be later this evening. Thanks for checking into the shipping.
Posted via Mobile Device

gus67 · 10-05-2011, 02:19 PM

Sounds good.

speedfreak369 · 10-08-2011, 03:39 PM

get me a quote through grayhound. ive ordered fenders and shipped through them. no problems.

10-04-2011, 02:43 PM	#1
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	67 Doors ready to install I have a pair of 67 doors that are primed and ready for paint, they are the original doors not repops. they have been fixed and primed and i do have the original glass also. looking for $450.00 for the pair including glass. make an offer. Edit- found out this morning it will be cheaper if i use greyhound, hope that helps interest a little more. will be alot cheaper to ship. These Doors are sold. Attached Images Last edited by gus67; 10-05-2011 at 09:21 PM. Reason: sold

10-04-2011, 04:13 PM	#2
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: 67 Doors ready to install Do you have any before pictures?

10-04-2011, 04:49 PM	#3
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install i do, but those were taken with a film camera, so i would need to scan them first.

10-04-2011, 04:53 PM	#4
WETOWM Senior Member Join Date: Jun 2011 Location: ST LOUIS MO Posts: 2,103	Re: 67 Doors ready to install What shape where they in before the body work ? Also dont need the glass and last can you ship these ?

10-04-2011, 05:27 PM	#5
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install they had little pin holes on the bottom of the doors, i can sure find out for you how much it would cost to ship. i don't mind shipping these at all.

10-04-2011, 05:29 PM	#6
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: 67 Doors ready to install get me a quote to ship to 35611 ... don't need the glass

10-04-2011, 05:46 PM	#7
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install i got a quote for $275.00 to that zip code

10-04-2011, 09:02 PM	#8
speedfreak369 Registered User Join Date: Nov 2009 Location: GA/AL Posts: 290	Re: 67 Doors ready to install whats a quote to 30153 __________________ 1965 c10 short stepside (dad's project) 1967 c10 fleetside 350/350 trans (my baby)

10-05-2011, 12:04 AM	#9
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install into rockmouth,ga they quoted me 325.00,but if you willing to drive to atlanta they would charge me around 275.00

10-05-2011, 07:48 AM	#11
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67 Doors ready to install can you ship greyhound or give me a shipping quote to 25801 WV. __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

10-05-2011, 11:08 AM	#12
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install never have done greyhound, kind of worried they would get damaged but i could find out, the company i would use to ship is quoting me 450 bucks.

10-05-2011, 12:41 PM	#13
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67 Doors ready to install Sheew, thats the problem, the shipping. the cost to ship is crazy anymore. Id sure could use them. I had some inner fender's ship from CA. through greyhound I dont know how they were wrapped or what, they made it though wrapping looked rough. but they were used. I really don't know how they looked when they were shipped. $60 though a lot cheaper.... __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

10-05-2011, 12:52 PM	#14
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install jessewebb let me look into the greyhound thing, i would really hate to see these doors get damaged, are you also looking into the glass or you don't need the glass.

10-05-2011, 01:07 PM	#15
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67 Doors ready to install just the doors. thanks __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

10-05-2011, 01:18 PM	#16
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install greyhound quote was $110.00 dollars, just let me know what is closer to you, charleston or bluefield



Register or Log In To remove these advertisements.

10-05-2011, 02:03 PM	#17
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: 67 Doors ready to install Bluefield is the closer. Charleston may be a better choice though. It takes about the same time for me to get to either drop off. I'll PM, see if we can work something up. I have some business to take care of today. It'll be later this evening. Thanks for checking into the shipping. Posted via Mobile Device __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

10-05-2011, 02:19 PM	#18
gus67 Registered User Join Date: Jan 2007 Location: Downey,Ca. Posts: 221	Re: 67 Doors ready to install Sounds good.

10-08-2011, 03:39 PM	#19
speedfreak369 Registered User Join Date: Nov 2009 Location: GA/AL Posts: 290	Re: 67 Doors ready to install get me a quote through grayhound. ive ordered fenders and shipped through them. no problems. __________________ 1965 c10 short stepside (dad's project) 1967 c10 fleetside 350/350 trans (my baby)

Register or Log In To remove these advertisements.