My wife's 2WD Blazer pics... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 08-15-2003, 12:06 PM

We used 2 1/2 spindles and 3 inch springs. Actually we sandblasted and painted the Rally wheels, and when we installed them, the fronts were really too wide. The spindles widened the front track about 1/2 per side. We wound up blasting and painting a 7 inch wide rally for the front. The backs are 8 inch pickup rallys and the fronts are 7 inch van rallys.

When she gets home tonight, I'm going to have her find the reciept for the suspension parts. It's been 3 years, and I'm feeling like my memory is flaky. If the above is wrong, I'll post later tonight with the correct stuff.

BigRed · 08-15-2003, 01:24 PM

Very nice! Y'all do good work! If I had the money, I'd be driving right over to Weatherford to make you an offer.

Izzy · 08-15-2003, 02:18 PM

Cleanest old school Blazer I've ever seen.

1974StepSide · 08-15-2003, 04:21 PM

I gotta go with 58 chevy, that Blazer looks SO clean... Verrry Nice...

**Captkaos** · 08-15-2003, 06:20 PM

VERY nice! I love it!

sam79 · 08-15-2003, 08:41 PM

Very nice blazer!! I can only dream about owning such a nice blazer. This is an example of what I want to create during the frame off resto of my truck. Too bad my upholstery skills aren't that good. You're wife really did a great job, my compliments

apstguy · 08-16-2003, 10:22 PM

That is a very nice blazer!

**swervin ervin** · 08-16-2003, 10:44 PM

Real nice. A dream machine for sure.

littlebubba · 08-16-2003, 11:31 PM

You should be proud, you did a real nice job all the way around! Thanks for the pics, and some of your ideas.

Tx Firefighter · 08-16-2003, 11:38 PM

I got out the rpaperwork. In the front, we used a Belltech pn 3100 spindle, and a Summit G727 spring. The spindle is 3 inches and spring 2 inches. Total front drop is 5 inches, not 5 1/2.

The rear, I measured the height of the Blazer, then removed the leaf springs completely. I used two floor jacks inder the back to get it to the right stance I wanted. I remeasured then, to determine how much it needed to be dropped. Had a local spring shop rebuild and dearch them, to get rear drop. Cost 106 dollars including new shackle bushings.

bigblock73 · 08-17-2003, 12:25 AM

http://cgi.ebay.com/ebaymotors/ws/eB...ory=33586&rd=1

lookie what I stumbled across!

Doesn't hurt to promote your product...it is truck relaed!

...Jeff

lofat · 08-18-2003, 02:18 AM

very cherry indeed.

your wife has a phat ride bro.

Russell · 08-18-2003, 02:29 AM

I can only dream...

loweredd · 08-18-2003, 08:28 PM

LOL I saw that this morning too.

Quote:

Originally posted by bigblock73
http://cgi.ebay.com/ebaymotors/ws/eB...ory=33586&rd=1

lookie what I stumbled across! Doesn't hurt to promote your product...it is truck relaed!

...Jeff

08-15-2003, 12:06 PM	#26
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	We used 2 1/2 spindles and 3 inch springs. Actually we sandblasted and painted the Rally wheels, and when we installed them, the fronts were really too wide. The spindles widened the front track about 1/2 per side. We wound up blasting and painting a 7 inch wide rally for the front. The backs are 8 inch pickup rallys and the fronts are 7 inch van rallys. When she gets home tonight, I'm going to have her find the reciept for the suspension parts. It's been 3 years, and I'm feeling like my memory is flaky. If the above is wrong, I'll post later tonight with the correct stuff. __________________ I'm on the Instagram- @Gearhead_Kevin

08-15-2003, 01:24 PM	#27
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Very nice! Y'all do good work! If I had the money, I'd be driving right over to Weatherford to make you an offer. __________________ Scott Shelbourne

08-15-2003, 04:21 PM	#29
1974StepSide Play it Loud... Join Date: Aug 2002 Location: East San Jose, CA Posts: 465	I gotta go with 58 chevy, that Blazer looks SO clean... Verrry Nice... __________________ Big Moe =-=-=-= 1974 Cheyenne Super Stepside, 350/400, Hooker Headers, Flowmaster Mufflers... Needs new doors, fenders, hood, and paint. 1952 Chevy Pickup waiting to be brought back home!

08-15-2003, 06:20 PM	#30
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	VERY nice! I love it! __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

08-15-2003, 08:41 PM	#31
sam79 Registered User Join Date: Jan 2003 Location: Hilversum, The Netherlands Posts: 74	Very nice blazer!! I can only dream about owning such a nice blazer. This is an example of what I want to create during the frame off resto of my truck. Too bad my upholstery skills aren't that good. You're wife really did a great job, my compliments __________________ Sam 79 The Netherlands '79 GMC c15 '72 VW beetle http://home.zonnet.nl/sandercalis

08-15-2003, 02:18 PM	#28
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Cleanest old school Blazer I've ever seen.

08-16-2003, 10:22 PM	#32
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	That is a very nice blazer! __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

08-16-2003, 10:44 PM	#33
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Real nice. A dream machine for sure. __________________ Mike 1985 Chevy C-10

08-16-2003, 11:31 PM	#34
littlebubba Registered User Join Date: Jun 2002 Location: Clinton Twp., Michigan Posts: 323	Nice Job! You should be proud, you did a real nice job all the way around! Thanks for the pics, and some of your ideas.

08-16-2003, 11:38 PM	#35
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	To clarify a little... I got out the rpaperwork. In the front, we used a Belltech pn 3100 spindle, and a Summit G727 spring. The spindle is 3 inches and spring 2 inches. Total front drop is 5 inches, not 5 1/2. The rear, I measured the height of the Blazer, then removed the leaf springs completely. I used two floor jacks inder the back to get it to the right stance I wanted. I remeasured then, to determine how much it needed to be dropped. Had a local spring shop rebuild and dearch them, to get rear drop. Cost 106 dollars including new shackle bushings. __________________ I'm on the Instagram- @Gearhead_Kevin

08-17-2003, 12:25 AM	#36
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	http://cgi.ebay.com/ebaymotors/ws/eB...ory=33586&rd=1 lookie what I stumbled across! Doesn't hurt to promote your product...it is truck relaed! ...Jeff

08-18-2003, 02:18 AM	#37
lofat Rollin' Member Join Date: May 2003 Location: Hayward, California Posts: 240	very cherry indeed. your wife has a phat ride bro. __________________ :: 1977 C10 cheyenne :: :: 1973 new yorker brougham :: for sale - $1,500 lofat productions

08-18-2003, 02:29 AM	#38
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I can only dream... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.