Intake Manifold Removal & Install - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

treveiger · 10-11-2011, 06:32 PM

Let us know how it goes!
Posted via Mobile Device

*RUSHNBOBO* · 10-11-2011, 07:11 PM

Make sure before you lay silicone on anything that's its chemically clean.....use a strong sovlent that leaves no residue such as lacquer thinner, acetone or brake cleaner.

25+ tips ....all for free, your mechanic won't do that for you

Ryan5O · 10-11-2011, 09:01 PM

Woo Hoo! Up and running. The advance was off a bit. I think it actually runs smoother than before. Here's a pic

treveiger · 10-12-2011, 01:37 PM

Feels good don't it

Posted via Mobile Device

yuccales · 10-12-2011, 06:28 PM

That looks real good.

Ryan5O · 10-13-2011, 01:09 AM

Thanks guys. The next project will be relocating that ugly fuel filter.

OJ1988 · 10-13-2011, 07:59 AM

Get rid of the filter, and put a stock one back in the carb.

MARKDTN · 10-13-2011, 10:36 AM

I know I am a little late, but I always change the oil before I crank it. No matter how careful you are, you always have a little antifreeze that gets in the valley.

C20-67_N_MO · 10-13-2011, 04:18 PM

Dang!

That turned out very nice!

Ryan5O · 10-13-2011, 05:29 PM

Yeah, thanks again. It took a ton of work just to get it clean. The oil and grime had been caked on there for so long, I actually had to chip away at it. It was a learning experience for sure, but totally worth it if you want to change the look of your engine bay. Hardly any money went into it; all the original parts.

Ryan5O · 10-13-2011, 05:33 PM

I'll post a before pic this weekend.

**leddzepp** · 10-13-2011, 05:48 PM

nothing looks better than a clean engine compartment....good work!

10-11-2011, 06:32 PM	#26
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: Intake Manifold Removal & Install Let us know how it goes! Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

10-11-2011, 07:11 PM	#27
RUSHNBOBO Account Suspended Join Date: Jun 2010 Location: Placerville Ca. Posts: 982	Re: Intake Manifold Removal & Install Make sure before you lay silicone on anything that's its chemically clean.....use a strong sovlent that leaves no residue such as lacquer thinner, acetone or brake cleaner. 25+ tips ....all for free, your mechanic won't do that for you

10-11-2011, 09:01 PM	#28
Ryan5O Registered User Join Date: Mar 2011 Location: Spokane WA Posts: 198	Re: Intake Manifold Removal & Install Woo Hoo! Up and running. The advance was off a bit. I think it actually runs smoother than before. Here's a pic Attached Images __________________ USCG "Support Search & Rescue, Get Lost"

10-12-2011, 01:37 PM	#29
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,093	Re: Intake Manifold Removal & Install Feels good don't it Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

10-12-2011, 06:28 PM	#30
yuccales Registered User Join Date: May 2011 Location: Northern Calif. Posts: 3,658	Re: Intake Manifold Removal & Install That looks real good.

10-13-2011, 01:09 AM	#31
Ryan5O Registered User Join Date: Mar 2011 Location: Spokane WA Posts: 198	Re: Intake Manifold Removal & Install Thanks guys. The next project will be relocating that ugly fuel filter. __________________ USCG "Support Search & Rescue, Get Lost"

10-13-2011, 07:59 AM	#32
OJ1988 Just a car guy Join Date: Feb 2006 Location: New Washington, IN Posts: 991	Re: Intake Manifold Removal & Install Get rid of the filter, and put a stock one back in the carb. __________________ 1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig

10-13-2011, 10:36 AM	#33
MARKDTN Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 2,144	Re: Intake Manifold Removal & Install I know I am a little late, but I always change the oil before I crank it. No matter how careful you are, you always have a little antifreeze that gets in the valley. __________________ '83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project

10-13-2011, 04:18 PM	#34
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Intake Manifold Removal & Install Dang! That turned out very nice! __________________ Coming Soon: Project 1970 Country Truck

10-13-2011, 05:29 PM	#35
Ryan5O Registered User Join Date: Mar 2011 Location: Spokane WA Posts: 198	Re: Intake Manifold Removal & Install Yeah, thanks again. It took a ton of work just to get it clean. The oil and grime had been caked on there for so long, I actually had to chip away at it. It was a learning experience for sure, but totally worth it if you want to change the look of your engine bay. Hardly any money went into it; all the original parts. __________________ USCG "Support Search & Rescue, Get Lost"

10-13-2011, 05:33 PM	#36
Ryan5O Registered User Join Date: Mar 2011 Location: Spokane WA Posts: 198	Re: Intake Manifold Removal & Install I'll post a before pic this weekend. __________________ USCG "Support Search & Rescue, Get Lost"

10-13-2011, 05:48 PM	#37
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Intake Manifold Removal & Install nothing looks better than a clean engine compartment....good work! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.