Cab mount from Truck and car shop ??

[kcfirstbuild]

I purchased the rubber cab mount from car and truck shop. It came with the radiator core bushings that I cant use for my 68 from what I understand. The problem I'm having is I have no clue what washers go where and which of the thicker bushings go to the front of the vehicle.

In the picture, The left bushings seem to be the radiator core support. The next two over are the larger bolt for the front of the cab mount with the thicker bushings. Then the next is the small bolt with the thinner bushings.

I have no clue where the washers along of the top of the picture go.

[kcfirstbuild]

any help ?

[Fitz]

Originally Posted by kcfirstbuild

any help ?

Go to LMC Truck and check the catalog page that shows the cab mounts...they have an exploded view that shows what goes where...or you could just buy the factory assembly manual.

[kcfirstbuild]

I looked at lmc and that doesnt really help me out. The washer in question only fit the smaller bolt. I dont get why i have so many for that one bolt.

[partsman3]

Looks like you have 1 too many washers. That also looks like the first set I bought. They made my cab too low to line up with the bed. Here is a page from LMC to show you how the mounts and washers go. Washer on top of the top mount and on the botton of the bottom mount. The bottom mount goes smaller end down.

[Tim Christian]

I have a instruction sheet that will help a little if you will give me your e-mail address I will send it to you. Thanks Tim