another acquisition possibly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tex_50613 · 10-12-2011, 06:40 PM

here's a truck my buddy called me to come look at yesterday
it's a 2wd with a 454ci bb, sm465 and a NP205 t-case, it seams to me that someone started a 4x4 conversion and never finished, the hump is out of a 4 wheel drive and the rear is a 14bolt that has 4:56 with a Posi according to the owner (this isn't a face that I know just what I was told) the body is sound and has very little rust

I think it may be worth scooping up for parts what yall think

meter swinger · 10-12-2011, 07:10 PM

Do it. Would make an awesome puller.
Posted via Mobile Device

Motodrew · 10-12-2011, 07:18 PM

Body & glass looks pretty straight.

Tex_50613 · 10-12-2011, 07:27 PM

shoulda added that it is $400 and the motor possibly has a spun main, but I figured the box and trans+t-case is worth that not to mention any other salvagable parts

Your41Plague12 · 10-13-2011, 02:40 AM

For $400 I'd buy that tomorrow. That's a deal in just sheet metal alone, let alone transmission, transfer case, and other parts.

motornut · 10-13-2011, 06:55 AM

looks like a good deal
would be another 0 on the end up here lol

Goldfinger · 10-13-2011, 07:33 AM

I love the single cab dually

**oldwagon** · 10-13-2011, 08:47 AM

Parts or build, it's definately a good buy. I'm partial to single cabs myself.

Tex_50613 · 10-13-2011, 01:52 PM

here's a couple more pics, went over and rat-poisoned the cab gonna pick it up either later today or tomorrow

looked again and the only bad sheet metal is the front drivers fender and there is no bondo that I could find

MCCLELLAN103 · 10-13-2011, 02:05 PM

thats a cool badge.

**Dieselwrencher** · 10-13-2011, 02:12 PM

Very nice score you dog!

Tex_50613 · 10-13-2011, 02:20 PM

Quote:

Originally Posted by Dieselwrencher

Very nice score you dog!

be better if there was a drive shaft and front dana 60 hooked to the NP 205 in it, but it's nice steel and lots of good parts

**Dieselwrencher** · 10-13-2011, 02:29 PM

Quote:

Originally Posted by Tex_50613

be better if there was a drive shaft and front dana 60 hooked to the NP 205 in it, but it's nice steel and lots of good parts

For sure, but you have already snagged enough sweet D60 deals!

Goldfinger · 10-13-2011, 07:58 PM

keep that rear bumper if it's the same one that's on my c10 it will take a beating and is easy to repair if you should be rear ended. It should be a Hercules bumper, Pelham, Georgia 12k pull 1200lb tongue weight.

Tex_50613 · 10-13-2011, 10:07 PM

Quote:

Originally Posted by Goldfinger

keep that rear bumper if it's the same one that's on my c10 it will take a beating and is easy to repair if you should be rear ended. It should be a Hercules bumper, Pelham, Georgia 12k pull 1200lb tongue weight.

my friend I keep no factory bumpers, I design and build heavy duty aftermarket bumpers for a living nothing I own will have a factory bumper unless I'm building a low-rider being as I've had my bumpers in 45mph crashes without damage to them other than scuffed powder coating. although thanks for the interesting info on it but any factory bumper isn't for me

trout · 10-13-2011, 10:34 PM

nice keep it and make a puller out of it not many around

80stepsideguy · 10-14-2011, 04:33 AM

Don`t junk that motor.It be a great platform for a sweet motor build.

thanks
pat

**78 Big10 454** · 10-14-2011, 05:25 AM

I'd buy it just because it has a Brodie knob on the steering wheel.

Tex_50613 · 10-14-2011, 07:56 PM

got it home at noon30 and tore it down already

frame and dana 70 rear are on the trailer slated for the scrapper first thing Monday, and that's not me driving the forktruck

WarBeard · 10-14-2011, 10:21 PM

Quote:

Originally Posted by 78 Big10 454

I'd buy it just because it has a Brodie knob on the steering wheel.

WIN!!!!!!!!

WarBeard · 10-14-2011, 10:23 PM

Quote:

Originally Posted by Tex_50613

got it home at noon30 and tore it down already

frame and dana 70 rear are on the trailer slated for the scrapper first thing Monday, and that's not me driving the forktruck

So sad!

Tex_50613 · 10-17-2011, 06:32 PM

1 died so 3 can live on

10-12-2011, 06:40 PM	#1
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	another acquisition possibly here's a truck my buddy called me to come look at yesterday it's a 2wd with a 454ci bb, sm465 and a NP205 t-case, it seams to me that someone started a 4x4 conversion and never finished, the hump is out of a 4 wheel drive and the rear is a 14bolt that has 4:56 with a Posi according to the owner (this isn't a face that I know just what I was told) the body is sound and has very little rust I think it may be worth scooping up for parts what yall think __________________ Overkill is under rated, Redneck Customs Truck Club Hudson, IA "Clifford" 83 Chevy K20 4x4, Mudder 7" lift rolling 44's "Basterd Child" 86 Chevy K30 4x4 crue cab Dule, 7.3l international WIP '00 ex-cab Silverado 4x4 DD I hate red trucks but you can't tell by looking at what I own

10-12-2011, 07:10 PM	#2
meter swinger Registered User Join Date: Apr 2009 Location: Kennewick WA. Posts: 1,437	Re: another acquisition possibly Do it. Would make an awesome puller. Posted via Mobile Device

10-12-2011, 07:18 PM	#3
Motodrew Registered User Join Date: Oct 2011 Location: Denver, CO Posts: 38	Re: another acquisition possibly Body & glass looks pretty straight. __________________ '85 Silverado, 4x4, SB 350. Keep them beavers grinnin' and them wheels a spinnin'!

10-12-2011, 07:27 PM	#4
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: another acquisition possibly shoulda added that it is $400 and the motor possibly has a spun main, but I figured the box and trans+t-case is worth that not to mention any other salvagable parts __________________ Overkill is under rated, Redneck Customs Truck Club Hudson, IA "Clifford" 83 Chevy K20 4x4, Mudder 7" lift rolling 44's "Basterd Child" 86 Chevy K30 4x4 crue cab Dule, 7.3l international WIP '00 ex-cab Silverado 4x4 DD I hate red trucks but you can't tell by looking at what I own

10-13-2011, 02:40 AM	#5
Your41Plague12 Registered User Join Date: Dec 2010 Location: Pittsburgh, PA Posts: 1,009	Re: another acquisition possibly For $400 I'd buy that tomorrow. That's a deal in just sheet metal alone, let alone transmission, transfer case, and other parts. __________________ Steve Member of the Foot Pedal Club '83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL, Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws, 350 HP 350 crate engine from Jegs, Turbo 400

10-13-2011, 06:55 AM	#6
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: another acquisition possibly looks like a good deal would be another 0 on the end up here lol __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

10-13-2011, 07:33 AM	#7
Goldfinger Registered User Join Date: May 2010 Location: laurel hill Fl Posts: 645	Re: another acquisition possibly I love the single cab dually __________________ 1985 C10 Custom Deluxe LWB 305/700r4 [ Goldfinger ] 1999 k3500 crew cab dually 6.5tdi/4l80e

10-13-2011, 08:47 AM	#8
oldwagon Registered User Join Date: Feb 2003 Location: Mulvane, Ks. Posts: 754	Re: another acquisition possibly Parts or build, it's definately a good buy. I'm partial to single cabs myself.

10-13-2011, 01:52 PM	#9
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: another acquisition possibly here's a couple more pics, went over and rat-poisoned the cab gonna pick it up either later today or tomorrow looked again and the only bad sheet metal is the front drivers fender and there is no bondo that I could find __________________ Overkill is under rated, Redneck Customs Truck Club Hudson, IA "Clifford" 83 Chevy K20 4x4, Mudder 7" lift rolling 44's "Basterd Child" 86 Chevy K30 4x4 crue cab Dule, 7.3l international WIP '00 ex-cab Silverado 4x4 DD I hate red trucks but you can't tell by looking at what I own

10-13-2011, 02:05 PM	#10
MCCLELLAN103 Registered User Join Date: Jun 2010 Location: Tulsa, OK Posts: 85	Re: another acquisition possibly thats a cool badge. __________________ To Broke to be Fast

10-13-2011, 02:12 PM	#11
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: another acquisition possibly Very nice score you dog! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

10-13-2011, 07:58 PM	#14
Goldfinger Registered User Join Date: May 2010 Location: laurel hill Fl Posts: 645	Re: another acquisition possibly keep that rear bumper if it's the same one that's on my c10 it will take a beating and is easy to repair if you should be rear ended. It should be a Hercules bumper, Pelham, Georgia 12k pull 1200lb tongue weight. __________________ 1985 C10 Custom Deluxe LWB 305/700r4 [ Goldfinger ] 1999 k3500 crew cab dually 6.5tdi/4l80e

10-13-2011, 10:34 PM	#16
trout Registered User Join Date: Jun 2010 Location: lexington, SC Posts: 1,276	Re: another acquisition possibly nice keep it and make a puller out of it not many around __________________ Edited by staff

10-14-2011, 04:33 AM	#17
80stepsideguy Laid back freak Join Date: Mar 2008 Location: hastings florida Posts: 248	Re: another acquisition possibly Don`t junk that motor.It be a great platform for a sweet motor build. thanks pat __________________ 1980 chevy c10 step side restomod, 1970 cougar convertible 1 OF 24 ever built: 2014 Hyundai Tucson limited (daily driver).

10-14-2011, 05:25 AM	#18
78 Big10 454 78 Big10 454 Join Date: Jul 2008 Location: Pismo Beach, CA Posts: 838	Re: another acquisition possibly I'd buy it just because it has a Brodie knob on the steering wheel.



Register or Log In To remove these advertisements.

10-14-2011, 07:56 PM	#19
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: another acquisition possibly got it home at noon30 and tore it down already frame and dana 70 rear are on the trailer slated for the scrapper first thing Monday, and that's not me driving the forktruck __________________ Overkill is under rated, Redneck Customs Truck Club Hudson, IA "Clifford" 83 Chevy K20 4x4, Mudder 7" lift rolling 44's "Basterd Child" 86 Chevy K30 4x4 crue cab Dule, 7.3l international WIP '00 ex-cab Silverado 4x4 DD I hate red trucks but you can't tell by looking at what I own Last edited by Tex_50613; 10-14-2011 at 08:18 PM.

10-17-2011, 06:32 PM	#22
Tex_50613 Redneck Customs Bumpers, IA Join Date: Nov 2009 Location: Waterloo, IA Posts: 503	Re: another acquisition possibly 1 died so 3 can live on __________________ Overkill is under rated, Redneck Customs Truck Club Hudson, IA "Clifford" 83 Chevy K20 4x4, Mudder 7" lift rolling 44's "Basterd Child" 86 Chevy K30 4x4 crue cab Dule, 7.3l international WIP '00 ex-cab Silverado 4x4 DD I hate red trucks but you can't tell by looking at what I own

Register or Log In To remove these advertisements.