VA Super Nice Tach and Air pressure

[VA72C10]

Restored Tach dash with Air pressure gauge. SUPER SUPER nice original gauges and lense. Very nice color on the gauges and the needles were almost perfect but since they were slightly faded I repainted them. I spent a good amount of time polishing the lense and it looks great! Cleaned the gauges and tins, installed a new MADE IN THE USA printed circuit, cleaned the bulb holders and put in new bulbs as needed, and installed a new black and chrome bezel. Air pressure can be used for a utility air tank, air horn tank, or of course air bag tank pressure.

Asking 500 shipped with insurance in the conus for this one because it's the nicest one you'll find. I can add the speedwarning speedometer with harness and buzzer and the ground pin in the back tin to make this a tach, air, speedwarning for an additional 400.

Check, money order, or paypal (if you pay the fees)

[VA72C10]

ttt....open to reasonable offers...need to sell...

[k5kev]

How about $500 shipped to 92807?

[VA72C10]

I will do that. Pm sent with payment info.

[m6z]

nice!

wish I had some money to spend.

[VA72C10]

Thanks.

Dash is still available. K5kev is going to get a tach/vac setup from me. So I'll offer the same 500 shipped to anyone else.

[VA72C10]

ttt

[VA72C10]

Now for sale locally as well

[orngsikL]

whre'd you find the tach and air pressure gauge?

[VA72C10]

Originally Posted by orngsikL

whre'd you find the tach and air pressure gauge?

I got this dash in great condition off this board...disassembled it, cleaned the tins, and put a new printed circuit and bezel on, polished the lens, painted the needles, and put new bulbs in.

[VA72C10]

ttt for a super nice dash!

[VA72C10]

ttt

[VA72C10]

ttt....ebay monday if not sold here

[Critterman71]

I need a vac gauge set up for my tack dash any help there?

[VA72C10]

I can. I have two new tach vac lenses I've ordered and two nice vac gauges...one is sold to k5kev already.

[72peace]

If you would indulge me a question, if not I understand, concerning air pressure vs vacuum. Why would you want one vs the other?

Cheers,

[Critterman71]

OK would I need a new printed circuit as well to run the light for the vac gauge? or will the stock one work?

[VA72C10]

Originally Posted by 72peace

If you would indulge me a question, if not I understand, concerning air pressure vs vacuum. Why would you want one vs the other?

Cheers,

Air pressure was originally intended for big trucks with air brakes. It's great for someone with an onboard air tank or air ride...or train horns Otherwise not very useful

Vac is used for monitoring engine vacuum and can tell you a lot about your engine by its' readings.

Originally Posted by Critterman71

OK would I need a new printed circuit as well to run the light for the vac gauge? or will the stock one work?

It's the same circuit for a standard tach dash (which is different than a dash without a tach). Are you wanting just the parts to make one yourself or wanting me to assemble one? If I assemble one I can use your gauges or nice ones I have. (ex. if you want to keep your odometer-I can swap on a nicer face if needed)

[VA72C10]

ttt

[Critterman71]

Yes I am looking for the parts to do it my self I have a really nice gauge set on my truck probably redone before I bought it all is new looking except it has 94000 on the Odometer.

[VA72C10]

Originally Posted by Critterman71

Yes I am looking for the parts to do it my self I have a really nice gauge set on my truck probably redone before I bought it all is new looking except it has 94000 on the Odometer.

so do you need the tach, inner and outer tins, vac gauge with plate for the vac/oil to attach to, tach/vac lens, printed circuit to work with the tach, tach harness, and new bezel? If not, what parts do you want and I can give you a price.

[Critterman71]

I apologize for not being more specific. I have an very nice dash set up with a tach. I want to add the vac gauge to it so I will need what ever parts necessary to do so. also shoot me a price on a nice speedo if you have one that is rolled back to ooooo.

[VA72C10]

Originally Posted by Critterman71

I apologize for not being more specific. I have an very nice dash set up with a tach. I want to add the vac gauge to it so I will need what ever parts necessary to do so. also shoot me a price on a nice speedo if you have one that is rolled back to ooooo.

Okay, so you just need the inner tin for a tach with the vac gauge, and the vac gauge itself with the backing plate that accepts that and the oil, and finally the lens for tach with vac.

I'd swap the inner tin with your tach tin for $25 if you pay to ship yours to me. Buying it outright I'd need $75. The lens is 50 and the gauge I have a nice one for 50 and a perfect one for 75 (either one with the back plate). Let me know if you're interested.

[Critterman71]

Ok If I buy the tach/vac tin from you out right its 75.00 + 50 for the lens + 75 for the perfect gauge fro a total of 200.00 plus S/H. I want to keep the tack tin as I want to start an upgrade dash for my driver truck.

[VA72C10]

Originally Posted by Critterman71

Ok If I buy the tach/vac tin from you out right its 75.00 + 50 for the lens + 75 for the perfect gauge fro a total of 200.00 plus S/H. I want to keep the tack tin as I want to start an upgrade dash for my driver truck.

yes, shipping will run about 18-20. I'll do 215 shipped.