Hacked up doors!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MalibuKasey · 10-20-2011, 09:59 AM

So the PO decide to cut my nice solid doors for a set of old, huge, horrible 6x9 speakers.... If I could find him Id "tie him to the car... and drag him". SOOOOOOO does anyone have a set of doors that are uncut at the bottom that maybe the rest of the door is junk, and your willing to cut up?

**Clyde65** · 10-20-2011, 10:03 AM

I do but not near you, sorry

Rich 5150 69 · 10-20-2011, 10:07 AM

x-2, but I did pick up a set of junk doors for free...

MalibuKasey · 10-20-2011, 10:08 AM

Cut and ship?? :-)

gimmy 64 · 10-20-2011, 07:28 PM

i have some that i was trying to sell but decided to gut them and cut them up. i can cut the inside out if you want and ship them.take a better picture so i can see how much you need.

rustbucket66 · 10-20-2011, 09:01 PM

Why not repair what you've got? Cut out a piece of metal the same size and weld them in, not a big deal. A bit of grinding and some body work and you can save what you have. They look like a good set of doors, the set you get may need work also.

MOTOIMPAIRED · 10-20-2011, 10:56 PM

I might have at least one side for ya. Ill check in a few when I go to the garage to keep working.. Daytona is cominng quick!!

BR3W CITY · 10-21-2011, 11:24 AM

It seems like 60% of these got the doors cut like that. I know mine did. My solution is a little different; dynamat the door and put a better speaker in.

LostMy65 · 10-21-2011, 11:52 AM

Yes, very common.
That's why anyone who has junk doors, before they scrap them, should cut that area out if its still intact.
Posted via Mobile Device

MalibuKasey · 10-21-2011, 01:01 PM

LostMy65 EXACTLY RIGHT!! I want to "Look" bone stock at first glance (minus the lowering). Speakers in the doors kill me!

MOTOIMPAIRED · 10-22-2011, 01:14 AM

I looked at one of the doors I have and the area that you need is fine and no one cut it for speakers. I didnt check the second door yet but like I said, If at least one patch can help I will cut it out and send it to you??

tincan1966 · 10-22-2011, 06:07 AM

LMC truck and several other places sell repair or patch panels for the inside of the doors too- it's a lot less work than prepping used ones. JMO

dthela · 10-22-2011, 06:17 AM

I have some rotted doors I could cut out. Is it just a flat piece? Welding is going to be hard without warping that panel. I have used polyuerathane adhesive on panel but metal has to be ground clean. email me

BR3W CITY · 10-22-2011, 12:16 PM

^^buy a copper block or welding spoon. Helps channel the heat and really helps with burn and warpage on sheetmetal. I haven't tackled my inside yet, but for doing the door exterior it was a lifesaver.

10-20-2011, 09:59 AM	#1
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Hacked up doors!! So the PO decide to cut my nice solid doors for a set of old, huge, horrible 6x9 speakers.... If I could find him Id "tie him to the car... and drag him". SOOOOOOO does anyone have a set of doors that are uncut at the bottom that maybe the rest of the door is junk, and your willing to cut up? Attached Images __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

10-20-2011, 10:03 AM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,541	Re: Hacked up doors!! I do but not near you, sorry __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

10-20-2011, 10:07 AM	#3
Rich 5150 69 Registered User Join Date: Nov 2009 Location: Galt, Calif Posts: 2,437	Re: Hacked up doors!! x-2, but I did pick up a set of junk doors for free... __________________ `64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip

10-20-2011, 10:08 AM	#4
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Hacked up doors!! Cut and ship?? :-) __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

10-20-2011, 07:28 PM	#5
gimmy 64 Registered User Join Date: Sep 2009 Location: menifee california Posts: 788	Re: Hacked up doors!! i have some that i was trying to sell but decided to gut them and cut them up. i can cut the inside out if you want and ship them.take a better picture so i can see how much you need.

10-20-2011, 09:01 PM	#6
rustbucket66 Registered User Join Date: Dec 2010 Location: Strathmore, Alberta Posts: 470	Re: Hacked up doors!! Why not repair what you've got? Cut out a piece of metal the same size and weld them in, not a big deal. A bit of grinding and some body work and you can save what you have. They look like a good set of doors, the set you get may need work also.

10-20-2011, 10:56 PM	#7
MOTOIMPAIRED Registered User Join Date: Jan 2011 Location: Orlando Florida Posts: 315	Re: Hacked up doors!! I might have at least one side for ya. Ill check in a few when I go to the garage to keep working.. Daytona is cominng quick!! __________________ My build thread: 1966 stepside http://67-72chevytrucks.com/vboard/s...d.php?t=486223 1965 GMC fleet http://67-72chevytrucks.com/vboard/s...d.php?t=651726

10-21-2011, 11:24 AM	#8
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Hacked up doors!! It seems like 60% of these got the doors cut like that. I know mine did. My solution is a little different; dynamat the door and put a better speaker in. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

10-21-2011, 11:52 AM	#9
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,525	Re: Hacked up doors!! Yes, very common. That's why anyone who has junk doors, before they scrap them, should cut that area out if its still intact. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

10-21-2011, 01:01 PM	#10
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Hacked up doors!! LostMy65 EXACTLY RIGHT!! I want to "Look" bone stock at first glance (minus the lowering). Speakers in the doors kill me! __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

10-22-2011, 01:14 AM	#11
MOTOIMPAIRED Registered User Join Date: Jan 2011 Location: Orlando Florida Posts: 315	Re: Hacked up doors!! I looked at one of the doors I have and the area that you need is fine and no one cut it for speakers. I didnt check the second door yet but like I said, If at least one patch can help I will cut it out and send it to you?? __________________ My build thread: 1966 stepside http://67-72chevytrucks.com/vboard/s...d.php?t=486223 1965 GMC fleet http://67-72chevytrucks.com/vboard/s...d.php?t=651726

10-22-2011, 06:07 AM	#12
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: Hacked up doors!! LMC truck and several other places sell repair or patch panels for the inside of the doors too- it's a lot less work than prepping used ones. JMO

10-22-2011, 06:17 AM	#13
dthela Registered User Join Date: Jul 2011 Location: N Kingstown, R.I. Posts: 305	Re: Hacked up doors!! I have some rotted doors I could cut out. Is it just a flat piece? Welding is going to be hard without warping that panel. I have used polyuerathane adhesive on panel but metal has to be ground clean. email me

10-22-2011, 12:16 PM	#14
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Hacked up doors!! ^^buy a copper block or welding spoon. Helps channel the heat and really helps with burn and warpage on sheetmetal. I haven't tackled my inside yet, but for doing the door exterior it was a lifesaver. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.