OR Bbw panel c/w roof - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LT1 Burb · 10-02-2011, 08:15 PM

I have this BBW panel with glass and roof available. Take the whole cab for 350 or I will cut the roof off and panel. Pick up only.The roof is near perfect with no rust or dents that I can see.

db65 · 10-03-2011, 12:20 AM

What's the rest of the cab look like? What year Chev or GMC? Title?

LT1 Burb · 10-03-2011, 09:18 AM

The cab is not great. The firewall ac has been cut out, the dash is cut out, the floors are solid but non factory panels have been welded in and the truck was hit hard so the firewall has been pushed in where the inner fenders bolt up. I do have a title for it.

**Nobby** · 10-25-2011, 09:18 PM

lt1 burb,I'm looking for this piece in my pic. I guess you would call it the ''cowl vent box or tube''.I'm gonna drill out spot welds and hope I find one.If yours is nice and you would cut it out and ship it how much? Thanks,Nobby

MalibuKasey · 10-26-2011, 09:34 AM

Nobby.... Top banana sells em! I just replaced the driverside on my truck.

LT1 Burb · 10-30-2011, 10:18 AM

Quote:

Originally Posted by Nobby

lt1 burb,I'm looking for this piece in my pic. I guess you would call it the ''cowl vent box or tube''.I'm gonna drill out spot welds and hope I find one.If yours is nice and you would cut it out and ship it how much? Thanks,Nobby

Let me know how much of it you want cut, this truck has good ones .

**Nobby** · 10-30-2011, 08:21 PM

Quote:

Originally Posted by LT1 Burb

Let me know how much of it you want cut, this truck has good ones .

I would like the whole pc.If you can cut it off and leave the flange that would be great.

**rideblue00** · 10-30-2011, 08:30 PM

Im interested in the front roof section. Like 7" back from the edge. my inside panel where the rearview mounts is rusted. Let me know if you sell just that section.

LT1 Burb · 11-01-2011, 12:29 AM

Quote:

Originally Posted by Nobby

I would like the whole pc.If you can cut it off and leave the flange that would be great.

How the heck did you get that off, it looks like its welded on all the way on one side and spot welded on the other.

**Nobby** · 11-01-2011, 05:45 PM

Quote:

Originally Posted by LT1 Burb

How the heck did you get that off, it looks like its welded on all the way on one side and spot welded on the other.

Drilled out 48 spotwelds and it fell off

Took me about 30 min.

duallyjams · 11-01-2011, 07:46 PM

question in the pic it looks like the bbw panel has speaker hole cut in it.

LT1 Burb · 11-01-2011, 08:54 PM

Yes it does have speaker holes but in the flat part so an easy fix.

LT1 Burb · 11-01-2011, 08:55 PM

Quote:

Originally Posted by Nobby

Drilled out 48 spotwelds and it fell off

Took me about 30 min.

Is there a special tool or will any drill bit work.

**Nobby** · 11-01-2011, 09:35 PM

Quote:

Originally Posted by LT1 Burb

Is there a special tool or will any drill bit work.

Any drill bit will work but the spot weld cutter in the pic is the best way.

**rideblue00** · 11-01-2011, 11:04 PM

I seen those cutters at my local sherwin/williams auto paint store. Not sure on price tho. Drillbit makes a smaller hole but hard to hit the spot perfect everytime.

LT1 Burb · 11-02-2011, 12:31 AM

I think it might be easier to borrow a plasma cutter.

**Nobby** · 11-02-2011, 08:15 AM

Wait don't cut! I found one. Thanks anyway LT1burb

LT1 Burb · 11-02-2011, 09:22 AM

Quote:

Originally Posted by Nobby

Wait don't cut! I found one. Thanks anyway LT1burb

No worries, I am taking them off, another part to recoup money. The cab is getting sliced and diced.

10-02-2011, 08:15 PM	#1
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Bbw panel c/w roof I have this BBW panel with glass and roof available. Take the whole cab for 350 or I will cut the roof off and panel. Pick up only.The roof is near perfect with no rust or dents that I can see. Attached Images

10-03-2011, 12:20 AM	#2
db65 Registered User Join Date: Jul 2010 Location: Spanaway WA Posts: 26	Re: Bbw panel c/w roof What's the rest of the cab look like? What year Chev or GMC? Title? __________________ 65 GMC lwb

10-03-2011, 09:18 AM	#3
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: Bbw panel c/w roof The cab is not great. The firewall ac has been cut out, the dash is cut out, the floors are solid but non factory panels have been welded in and the truck was hit hard so the firewall has been pushed in where the inner fenders bolt up. I do have a title for it.

10-25-2011, 09:18 PM	#4
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: Bbw panel c/w roof lt1 burb,I'm looking for this piece in my pic. I guess you would call it the ''cowl vent box or tube''.I'm gonna drill out spot welds and hope I find one.If yours is nice and you would cut it out and ship it how much? Thanks,Nobby Attached Images

10-26-2011, 09:34 AM	#5
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: Bbw panel c/w roof Nobby.... Top banana sells em! I just replaced the driverside on my truck. __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

10-30-2011, 08:30 PM	#8
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,859	Re: Bbw panel c/w roof Im interested in the front roof section. Like 7" back from the edge. my inside panel where the rearview mounts is rusted. Let me know if you sell just that section.

11-01-2011, 07:46 PM	#11
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Bbw panel c/w roof question in the pic it looks like the bbw panel has speaker hole cut in it. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

11-01-2011, 08:54 PM	#12
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: Bbw panel c/w roof Yes it does have speaker holes but in the flat part so an easy fix.

11-01-2011, 11:04 PM	#15
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,859	Re: Bbw panel c/w roof I seen those cutters at my local sherwin/williams auto paint store. Not sure on price tho. Drillbit makes a smaller hole but hard to hit the spot perfect everytime.

11-02-2011, 12:31 AM	#16
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: Bbw panel c/w roof I think it might be easier to borrow a plasma cutter.

11-02-2011, 08:15 AM	#17
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: Bbw panel c/w roof Wait don't cut! I found one. Thanks anyway LT1burb



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.