B&MTorque converter FS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 08-20-2003, 11:36 AM

New B&M torkmaster 2000 torque converter for chevy TH350/400. Was bolted in the truck, but I had change of plans and went with a very nasty big block with a 9" converter. $50 plus shipping. E-mail me @ bburns@vikingtg.com or call 814-333-2704. Thanks. Brian

jmanz69 · 08-20-2003, 11:47 AM

How used is it? Did you run it or decide to change before, ie: how many miles are on it? My neighbor might want it for his camaro. Can you get me an approximate shipping cost to 48083 ZIP code.

Thanks,

jmanz69

Burnsman · 08-20-2003, 01:24 PM

It wasn't used at all. The motor was in place with no wiring (never fired). I ballparked the weight and came up with a shipping cost of $10.50.

jmanz69 · 08-20-2003, 05:36 PM

It fits the large diameter flexplate right? I'll ask my neighbor when I see him tonight. How much over stock is a 2000 stall? Stock is like 1000 or less right? It will give his Camaro a little more punch off the line. He'll like that. And it's cheap, he'll like that even more.

Longhorn Man · 08-20-2003, 07:56 PM

Stock is more like 1500 - 170 I believe.
I have a 1900 in mine and in day to day traffic, you forget it is even there. When you stomp it, you can feel it, but not onless you know it is there.
Pretty much invisable.

jmanz69 · 08-20-2003, 08:27 PM

So would there be much difference in stock and a 2000 stall converter? I don't want to tell him it'll be better to find out it's only so-so. It's cheap, and I think for the price, it won't matter much. What do you think?

Longhorn Man · 08-21-2003, 12:23 AM

Well, you can tell when you hit the gas, but it is a subtle differance.
I think i had a 8 foot patch before and a 12 foot after the converter swap. (burn out patch)
Maybe I understated it up there.

jmanz69 · 08-21-2003, 06:41 AM

Cool, just want to be sure there is a diference. He wants to put in as little as possible and still get some improvments. I told him he should get a higher stall converter, so he might go for this. He wasn't home tonight, but I will se him by the weekend.

Thanks

jmanz69

neonlarry · 08-21-2003, 12:23 PM

Is it still for sale? If so, let me know. I might be interested. I will check back tonight.

jmanz69 · 08-21-2003, 03:51 PM

NeonLarry,

If you want it go ahead, I haven't seen my neighbor to ask yet. If you want it take it. I was going to do him a favor, but he won't come home to talk to so screw him. I don't want to wait around and have someone else not get it.

neonlarry · 08-21-2003, 04:23 PM

Ok, thanks. I am not 100% sure I am going to need it either, but I am still thinkng about what I want to do. If your friend wants it, its no big deal, if not I may buy it. lol

mooneyes · 08-21-2003, 05:03 PM

hey burnsman is that your suburban and camaro you have for sale sitting in Grove City at stanlys old garage?

neonlarry · 08-22-2003, 12:30 AM

Ok, I decided I want the converter, so pm me and let me know how much, etc. I can do pay pal, or check, but no money orders.

Burnsman · 08-22-2003, 09:07 AM

Yep. That's my suburban. I just brought it home yesterday. I detailed the hell out of it and I'm going to take it to the Canfield swap meet to sell in September. My 81 is down there too. My buddy is starting up a car lot there. I have way too many toys. Wanna buy some!!??? Neon Larry, I sent you a PM.

08-20-2003, 11:36 AM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	B&MTorque converter FS New B&M torkmaster 2000 torque converter for chevy TH350/400. Was bolted in the truck, but I had change of plans and went with a very nasty big block with a 9" converter. $50 plus shipping. E-mail me @ bburns@vikingtg.com or call 814-333-2704. Thanks. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-20-2003, 01:24 PM	#3
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	torque converter It wasn't used at all. The motor was in place with no wiring (never fired). I ballparked the weight and came up with a shipping cost of $10.50. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

08-21-2003, 12:23 PM	#9
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Is it still for sale? If so, let me know. I might be interested. I will check back tonight. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-21-2003, 04:23 PM	#11
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Ok, thanks. I am not 100% sure I am going to need it either, but I am still thinkng about what I want to do. If your friend wants it, its no big deal, if not I may buy it. lol __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-21-2003, 05:03 PM	#12
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	hey burnsman is that your suburban and camaro you have for sale sitting in Grove City at stanlys old garage? __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

08-20-2003, 11:47 AM	#2
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	How used is it? Did you run it or decide to change before, ie: how many miles are on it? My neighbor might want it for his camaro. Can you get me an approximate shipping cost to 48083 ZIP code. Thanks, jmanz69

08-20-2003, 05:36 PM	#4
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	It fits the large diameter flexplate right? I'll ask my neighbor when I see him tonight. How much over stock is a 2000 stall? Stock is like 1000 or less right? It will give his Camaro a little more punch off the line. He'll like that. And it's cheap, he'll like that even more.

08-20-2003, 07:56 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Stock is more like 1500 - 170 I believe. I have a 1900 in mine and in day to day traffic, you forget it is even there. When you stomp it, you can feel it, but not onless you know it is there. Pretty much invisable.

08-20-2003, 08:27 PM	#6
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	So would there be much difference in stock and a 2000 stall converter? I don't want to tell him it'll be better to find out it's only so-so. It's cheap, and I think for the price, it won't matter much. What do you think?

08-21-2003, 12:23 AM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Well, you can tell when you hit the gas, but it is a subtle differance. I think i had a 8 foot patch before and a 12 foot after the converter swap. (burn out patch) Maybe I understated it up there.

08-21-2003, 06:41 AM	#8
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	Cool, just want to be sure there is a diference. He wants to put in as little as possible and still get some improvments. I told him he should get a higher stall converter, so he might go for this. He wasn't home tonight, but I will se him by the weekend. Thanks jmanz69

08-21-2003, 03:51 PM	#10
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	NeonLarry, If you want it go ahead, I haven't seen my neighbor to ask yet. If you want it take it. I was going to do him a favor, but he won't come home to talk to so screw him. I don't want to wait around and have someone else not get it.

08-22-2003, 12:30 AM	#13
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Ok, I decided I want the converter, so pm me and let me know how much, etc. I can do pay pal, or check, but no money orders. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-22-2003, 09:07 AM	#14
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	torque converter Yep. That's my suburban. I just brought it home yesterday. I detailed the hell out of it and I'm going to take it to the Canfield swap meet to sell in September. My 81 is down there too. My buddy is starting up a car lot there. I have way too many toys. Wanna buy some!!??? Neon Larry, I sent you a PM. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.