Anyone have power steering pump pic's - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

padresag · 08-09-2011, 01:41 AM

that mounting brkt that you have the pump mounted to may be to thick. I am using the stk brkts with a later pump and I had to shim it out(the pump) to get it to line up with the third pulley on the c/shaft.
you may have a mismatch of pulleys there also which is making it more difficult for you. look at #32 above on the r/side(red block) that is how your pulleys should look like.
1 on the p/s pump and a triple on the crank . The 3rd c/s pulley just bolts on to a double c/s pulley. don't know what yours came off of. your pump seems to be sitting to far forward. the thickness of the stock brkt is 3/16 of an inch at the back
ron

Rooster's 67 · 08-09-2011, 04:41 PM

nevermind, i quick posted at bottom of page 1, things got figured out on page 2....just a little slow today.

padresag · 08-11-2011, 01:11 AM

http://kieth.smugmug.com/Trucks/1966...982598_DNmrCNV

Blue Heeler · 08-21-2011, 12:25 AM

Well i started with the power steering conversion and would have to say it is a job. I did not finish, i started around 2oclack was busy this morning burning some rod in malibu and let me tell you i hate when people complain about things they know nothing about.. welding that is" anyways i've been taking pictures of my progress so i'll post them when i finish. My back is sore i'll hit it again in the morning. i'm going to saw some zzzzzs.

mo1968 · 11-10-2011, 03:39 AM

I have the same set up as you only differance is, my power steering reservoir is correct for 1968 (I think) which has a longer more narrrow neck. The altenator belt comes close but does not touch the reservoir. Both are mounted in oem locations on the drivers side no ac. Dont know if this helps or is any kind of solution just my 2 cents.

08-09-2011, 01:41 AM	#51
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Anyone have power steering pump pic's that mounting brkt that you have the pump mounted to may be to thick. I am using the stk brkts with a later pump and I had to shim it out(the pump) to get it to line up with the third pulley on the c/shaft. you may have a mismatch of pulleys there also which is making it more difficult for you. look at #32 above on the r/side(red block) that is how your pulleys should look like. 1 on the p/s pump and a triple on the crank . The 3rd c/s pulley just bolts on to a double c/s pulley. don't know what yours came off of. your pump seems to be sitting to far forward. the thickness of the stock brkt is 3/16 of an inch at the back ron

08-09-2011, 04:41 PM	#52
Rooster's 67 Registered User Join Date: Sep 2003 Location: DFW Posts: 765	Re: Anyone have power steering pump pic's nevermind, i quick posted at bottom of page 1, things got figured out on page 2....just a little slow today. __________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself? Last edited by Rooster's 67; 08-09-2011 at 04:44 PM. Reason: Im an IDIOT sometimes

08-11-2011, 01:11 AM	#53
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Anyone have power steering pump pic's http://kieth.smugmug.com/Trucks/1966...982598_DNmrCNV

08-21-2011, 12:25 AM	#54
Blue Heeler Registered User Join Date: Dec 2010 Location: Venice, Ca. Posts: 314	Re: Anyone have power steering pump pic's Well i started with the power steering conversion and would have to say it is a job. I did not finish, i started around 2oclack was busy this morning burning some rod in malibu and let me tell you i hate when people complain about things they know nothing about.. welding that is" anyways i've been taking pictures of my progress so i'll post them when i finish. My back is sore i'll hit it again in the morning. i'm going to saw some zzzzzs.

11-10-2011, 03:39 AM	#55
mo1968 Registered User Join Date: Sep 2008 Location: Ontario, Canada Posts: 34	Re: Anyone have power steering pump pic's I have the same set up as you only differance is, my power steering reservoir is correct for 1968 (I think) which has a longer more narrrow neck. The altenator belt comes close but does not touch the reservoir. Both are mounted in oem locations on the drivers side no ac. Dont know if this helps or is any kind of solution just my 2 cents.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.