GA complete cab floor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rob32472 · 11-10-2011, 05:22 PM

I have a complete cab floor I bought a while back it has a small pie shaped cut in the driver side at the fire wall due to a small stamping issue as all are aware.... price is 250.00 picked up it is a nice piece ready to go.... I will post some pic when I can

VA72C10 · 11-10-2011, 05:24 PM

awesome deal! I'm assuming without the cab supports or is it with?

rob32472 · 11-10-2011, 05:34 PM

Here are pics. I also have two good a/c fire walls and dashes ea are 75.00 picked up

rob32472 · 11-10-2011, 05:35 PM

Quote:

Originally Posted by VA72C10

awesome deal! I'm assuming without the cab supports or is it with?

With!

rob32472 · 11-10-2011, 05:58 PM

pic of one a/c dash.... the other is in primer all spot welds were dilled out during removal

VA72C10 · 11-10-2011, 07:00 PM

Wow, wish I could pick up that floor and a/c firewall....all I'd need is a junk cab with a good roof and I'd be set!

KILLER DEAL with the braces...those are 475 I think?

krue · 11-10-2011, 07:15 PM

Where is Dallas? I have a brother who lives near Cordele.

rob32472 · 11-10-2011, 07:48 PM

west of atl

rob32472 · 11-10-2011, 07:56 PM

the cab the floor is on has a killer roof and fire wall..... need corners and pillars but is an a/c cab sandblasted and ready......

Quote:

Originally Posted by VA72C10

Wow, wish I could pick up that floor and a/c firewall....all I'd need is a junk cab with a good roof and I'd be set!

KILLER DEAL with the braces...those are 475 I think?

Mr.C · 11-10-2011, 08:17 PM

how far from Suwanee are you? I may have someone that can pick it up for me.

rob32472 · 11-10-2011, 09:06 PM

I am about 1.5 hrs from there
Posted via Mobile Device

rob32472 · 11-11-2011, 06:21 AM

bump

rob32472 · 11-11-2011, 09:37 PM

ttt

rob32472 · 11-12-2011, 09:28 PM

open to trades.....

jessewebb · 11-12-2011, 11:04 PM

open to shipping?

HeavyMetalChevy · 11-12-2011, 11:40 PM

I will take the ac dashes pending a few more pics... Ship is not that bad and I would also be interested in floor but go to jessewebb first.. .He has been searching hard for good cab and this could be his ticket.

HeavyMetalChevy · 11-12-2011, 11:42 PM

yes I will take both dashes pending a few more pics of both I will arrange shipping and can you make it to Greyhound?

rob32472 · 11-13-2011, 12:35 AM

will do shipping on the dashes one is still in a cab, it is cut though the blue one is perfect!

rob32472 · 11-13-2011, 12:36 AM

may be open to shipping floor...... If you can arrange

HeavyMetalChevy · 11-13-2011, 01:05 AM

Quote:

Originally Posted by rob32472

may be open to shipping floor...... If you can arrange

Yeah the floor is for jessewebb... Trying to look out for him... Have met him and he is great guy... Send pics of cut ac. are the stereo hole knobs gone on it or just the square cut modified??? Let me know.. I will take both and arrange all the shipping. Thanks buddy,
Duane

jessewebb · 11-13-2011, 07:52 AM

i could use the a/c fire wall also. Is it already connected floor in the picture?

rob32472 · 11-13-2011, 09:00 AM

it is screwed with sheet metal screws for easy removal.....

rob32472 · 11-13-2011, 09:01 AM

Quote:

Originally Posted by HeavyMetalChevy

Yeah the floor is for jessewebb... Trying to look out for him... Have met him and he is great guy... Send pics of cut ac. are the stereo hole knobs gone on it or just the square cut modified??? Let me know.. I will take both and arrange all the shipping. Thanks buddy,
Duane

I will post a pic today of cut dash

jessewebb · 11-13-2011, 12:13 PM

Rob, I've already bought some floor patches. Don't think I'll take the floor pan. Do you know if the A/C firewall is much different than one without. I guess what I'm asking is it worth the trouble to change the whole thing or can I just cut a couple holes in the non A/C firewall and use it? I'm not trying to knock you out of a sell. Just not that familiar with any difference in them. If its gonna be a major job to to convert the non A/C over and I'd be better off goin with the A/C firewall. Put me down for one. It would have to be shipped. I mapped it out. Your right at 8 hours from me. Thanks Pete
Posted via Mobile Device

rob32472 · 11-13-2011, 12:42 PM

You can do a search for the differences in firewalls it is not that hard to change over....... No problem on the floor I am sure it will sell at some point. Let me know if I can help ya in anyway

11-10-2011, 05:22 PM	#1
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	complete cab floor I have a complete cab floor I bought a while back it has a small pie shaped cut in the driver side at the fire wall due to a small stamping issue as all are aware.... price is 250.00 picked up it is a nice piece ready to go.... I will post some pic when I can

11-10-2011, 05:24 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: complete cab floor awesome deal! I'm assuming without the cab supports or is it with? __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-10-2011, 05:34 PM	#3
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor Here are pics. I also have two good a/c fire walls and dashes ea are 75.00 picked up Attached Images

11-10-2011, 05:58 PM	#5
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor pic of one a/c dash.... the other is in primer all spot welds were dilled out during removal Attached Images

11-10-2011, 07:00 PM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: complete cab floor Wow, wish I could pick up that floor and a/c firewall....all I'd need is a junk cab with a good roof and I'd be set! KILLER DEAL with the braces...those are 475 I think? __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-10-2011, 07:15 PM	#7
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: complete cab floor Where is Dallas? I have a brother who lives near Cordele. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-10-2011, 07:48 PM	#8
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor west of atl

11-10-2011, 08:17 PM	#10
Mr.C Registered User Join Date: Nov 2010 Location: Plymouth, WI Posts: 174	Re: complete cab floor how far from Suwanee are you? I may have someone that can pick it up for me. __________________ How about you go over and introduce yourself, build me up, that way I don't have to brag about myself later.

11-10-2011, 09:06 PM	#11
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor I am about 1.5 hrs from there Posted via Mobile Device

11-11-2011, 06:21 AM	#12
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor bump

11-11-2011, 09:37 PM	#13
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor ttt

11-12-2011, 09:28 PM	#14
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor open to trades.....

11-12-2011, 11:04 PM	#15
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: complete cab floor open to shipping? __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

11-12-2011, 11:40 PM	#16
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: complete cab floor I will take the ac dashes pending a few more pics... Ship is not that bad and I would also be interested in floor but go to jessewebb first.. .He has been searching hard for good cab and this could be his ticket. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-12-2011, 11:42 PM	#17
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: complete cab floor yes I will take both dashes pending a few more pics of both I will arrange shipping and can you make it to Greyhound? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

11-13-2011, 12:35 AM	#18
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor will do shipping on the dashes one is still in a cab, it is cut though the blue one is perfect!

11-13-2011, 12:36 AM	#19
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor may be open to shipping floor...... If you can arrange

11-13-2011, 07:52 AM	#21
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: complete cab floor i could use the a/c fire wall also. Is it already connected floor in the picture? __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

11-13-2011, 09:00 AM	#22
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor it is screwed with sheet metal screws for easy removal.....

11-13-2011, 12:13 PM	#24
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: complete cab floor Rob, I've already bought some floor patches. Don't think I'll take the floor pan. Do you know if the A/C firewall is much different than one without. I guess what I'm asking is it worth the trouble to change the whole thing or can I just cut a couple holes in the non A/C firewall and use it? I'm not trying to knock you out of a sell. Just not that familiar with any difference in them. If its gonna be a major job to to convert the non A/C over and I'd be better off goin with the A/C firewall. Put me down for one. It would have to be shipped. I mapped it out. Your right at 8 hours from me. Thanks Pete Posted via Mobile Device __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

11-13-2011, 12:42 PM	#25
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,505	Re: complete cab floor You can do a search for the differences in firewalls it is not that hard to change over....... No problem on the floor I am sure it will sell at some point. Let me know if I can help ya in anyway

Register or Log In To remove these advertisements.