The Blue Goose

[67chevy1series]

drew is spot on but i dont think you want to take the fender off so take a pencil or sharpie and outline around the hinges where they mount to the door then take the hing to door bolts off (6) then once the door is off and its just hinges on the cab take a pencil or sharpie and outline around the hinges then loosen the bolts (6) and slide it back how ever much the door needs to come back then check to see if its equal in the horizontal lines above and below the hinge and tighten then brong the door back and put the hinges directly in the outlines on the door. tighten up WHEN DOOR IS OFF MAKE SURE TO PUT TRIM ON!!!!!!!!! putting the clip on right behind the fender will suck because there is no way possible to tighten the little nut behind the door.