IN NICE Heater control - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 10-20-2011, 01:01 AM

65 bucks shipped that is bottom line Is really nice...no pits just very slight discoloration on top... Great deal to be had... levers will be replaced with original parts when i get a "I'll take it" NOW RESTORED PICS with new replacement levers and fasteners..
Restored pics with levers and fasteners... I spend a lot of time with these to insure quality and durability...Tediously drilling and tapping the pot metal rivets making them stronger than original..lubed the pivot rod and switch control lever where the plastic bearing is.

HeavyMetalChevy · 10-21-2011, 01:42 AM

whats going on here folks... suggestions??? negotiate...I know someone needs/wants this.

**special-K** · 10-21-2011, 09:16 AM

I think it's going to be hard to get an "I'll take it" before it's in it's final sale condition. Also,sometimes you just have to wait until someone needs just what you are offering. Only the hottest of items sell the same day you list them...unless it's like I said before. Those are my suggestions from experience.

HeavyMetalChevy · 10-21-2011, 12:12 PM

Yeah I know but I just put stuff out there because I am so busy parting and stripping that it is hard to dedicate time making them all hole until someone shows interest is all..

HeavyMetalChevy · 11-01-2011, 01:29 AM

Restored pics with levers and fasteners... I spend a lot of time with these to insure quality and durability...Tediously drilling and tapping the pot metal rivets making them stronger than original..lubed the pivot rod and switch control lever where the plastic bearing is.

HeavyMetalChevy · 11-01-2011, 01:40 AM

better pics... sorry my camera fried out so I am having to use my phone...hard to get light right and hold steady... I am sure you can see the results of these and regular ones..

VA72C10 · 11-01-2011, 02:36 AM

Looks good! Especially that second one...chrome looks GREAT!

HeavyMetalChevy · 11-01-2011, 06:27 PM

ttt

HeavyMetalChevy · 11-05-2011, 12:12 AM

ttt... Offers on these??? These are all really nice new hardware and overhaul... NO pitting

70-Shorty · 11-05-2011, 01:49 AM

Pm sent
Tim
Posted via Mobile Device

OJ1988 · 11-05-2011, 03:19 PM

Quote:

Originally Posted by HeavyMetalChevy

whats going on here folks... suggestions??? negotiate...I know someone needs/wants this.

There just is not a huge demand for a lot of these old pull off items you are listing.

HeavyMetalChevy · 11-05-2011, 03:27 PM

Quote:

Originally Posted by OJ1988

There just is not a huge demand for a lot of these old pull off items you are listing.

Yeah I feel ya.. I just like posting I guess.. I have had decent luck with them... I like bringing stuff back to life and its the patina and nostalgia that gets me I think... I know what normal ones look like and I like giving them a breath of fresh air..Plus the housing will NEVER come off of mine. Yep Yep

HeavyMetalChevy · 11-06-2011, 11:21 PM

$65 bucks shipped.. I wonder how I could go about setting up warranties???

webfoot · 11-07-2011, 12:45 AM

Are those sheetmetal screws you drilled into the back where the old potmetal "rivets" were? What size do you use? I have one where the 2 bottom ones are busted.

FWIW I saw a NOS one end on fleabay for $75, only had 1 bid.

HeavyMetalChevy · 11-07-2011, 12:55 AM

Quote:

Originally Posted by webfoot

Are those sheetmetal screws you drilled into the back where the old potmetal "rivets" were? What size do you use? I have one where the 2 bottom ones are busted.

FWIW I saw a NOS one end on fleabay for $75, only had 1 bid.

Yeah.. NOS NOS... Levers and backing can still break at any time...Sometimes I use self tapping screws,,,sometimes I countersink them... I can weld pot metal as well but why repair something that is going to break as it did in the first place...

HeavyMetalChevy · 11-07-2011, 01:07 AM

And more

HeavyMetalChevy · 11-16-2011, 12:45 AM

ttt

10-20-2011, 01:01 AM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	NICE Heater control 65 bucks shipped that is bottom line Is really nice...no pits just very slight discoloration on top... Great deal to be had... levers will be replaced with original parts when i get a "I'll take it" NOW RESTORED PICS with new replacement levers and fasteners.. Restored pics with levers and fasteners... I spend a lot of time with these to insure quality and durability...Tediously drilling and tapping the pot metal rivets making them stronger than original..lubed the pivot rod and switch control lever where the plastic bearing is. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 11-06-2011 at 11:20 PM.

10-21-2011, 01:42 AM	#2
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control whats going on here folks... suggestions??? negotiate...I know someone needs/wants this. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-21-2011, 09:16 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: NICE Heater control I think it's going to be hard to get an "I'll take it" before it's in it's final sale condition. Also,sometimes you just have to wait until someone needs just what you are offering. Only the hottest of items sell the same day you list them...unless it's like I said before. Those are my suggestions from experience. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-21-2011, 12:12 PM	#4
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control Yeah I know but I just put stuff out there because I am so busy parting and stripping that it is hard to dedicate time making them all hole until someone shows interest is all.. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-01-2011, 01:29 AM	#5
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control Restored pics with levers and fasteners... I spend a lot of time with these to insure quality and durability...Tediously drilling and tapping the pot metal rivets making them stronger than original..lubed the pivot rod and switch control lever where the plastic bearing is. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog Last edited by HeavyMetalChevy; 11-01-2011 at 02:29 AM.

11-01-2011, 01:40 AM	#6
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control better pics... sorry my camera fried out so I am having to use my phone...hard to get light right and hold steady... I am sure you can see the results of these and regular ones.. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-01-2011, 02:36 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: NICE Heater control Looks good! Especially that second one...chrome looks GREAT! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-01-2011, 06:27 PM	#8
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-05-2011, 12:12 AM	#9
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control ttt... Offers on these??? These are all really nice new hardware and overhaul... NO pitting __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-05-2011, 01:49 AM	#10
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: NICE Heater control Pm sent Tim Posted via Mobile Device __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

11-06-2011, 11:21 PM	#13
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control $65 bucks shipped.. I wonder how I could go about setting up warranties??? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-07-2011, 12:45 AM	#14
webfoot Registered User Join Date: Nov 2007 Location: Hermiston, OR Posts: 947	Re: NICE Heater control Are those sheetmetal screws you drilled into the back where the old potmetal "rivets" were? What size do you use? I have one where the 2 bottom ones are busted. FWIW I saw a NOS one end on fleabay for $75, only had 1 bid. __________________ *Running in place gets you nowhere fast.* -me 1968 GTO 4-spd covnvertible 1970 K-20 4-speed, factory AC.

11-07-2011, 01:07 AM	#16
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control And more Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-16-2011, 12:45 AM	#17
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NICE Heater control ttt __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.