73-87 Lower ball joint dust boot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1LowToy · 11-13-2011, 10:37 PM

Anyone found a source for a 73-87 lower ball joint dust boot? I bought lower ball joints for mine just to get the boots and they are junk. They split out in six months.

**lolife99** · 11-16-2011, 08:44 PM

http://www.autopartswarehouse.com/pa...joint+boot+kit

KQQL IT · 11-17-2011, 02:16 AM

http://m.summitracing.com/parts/ENS-9-13126R
Posted via Mobile Device

1LowToy · 11-18-2011, 10:26 PM

I have a parts garden with a couple of lower control arms to measure out the lower BJs and see what I come up with for measurements. The one size fits all model really does not cut it and there is no specific listing for the 73-87 dust boots. I'm off this week so I'm going to be calling around to see if APW or Summit has any specific measurements for the numerous part numbers they have available that may fit.

I have found the uppers from the '88 and up will fit adequately.

11-13-2011, 10:37 PM	#1
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	73-87 Lower ball joint dust boot Anyone found a source for a 73-87 lower ball joint dust boot? I bought lower ball joints for mine just to get the boots and they are junk. They split out in six months.

11-16-2011, 08:44 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 73-87 Lower ball joint dust boot http://www.autopartswarehouse.com/pa...joint+boot+kit __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-17-2011, 02:16 AM	#3
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,254	Re: 73-87 Lower ball joint dust boot http://m.summitracing.com/parts/ENS-9-13126R Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

11-18-2011, 10:26 PM	#4
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: 73-87 Lower ball joint dust boot I have a parts garden with a couple of lower control arms to measure out the lower BJs and see what I come up with for measurements. The one size fits all model really does not cut it and there is no specific listing for the 73-87 dust boots. I'm off this week so I'm going to be calling around to see if APW or Summit has any specific measurements for the numerous part numbers they have available that may fit. I have found the uppers from the '88 and up will fit adequately.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.