I need some info on upolstery... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrod70C10 · 08-24-2003, 11:17 PM

I'm getting ready to cover my door panels in my 70. I'm looking for somewhere I can purchase the different foams to make designs. I'm really not going to need much though, I'm only putting a bowtie under the armrests on each door. Thanks in advance. Billy

*Phillip Johnson* · 08-25-2003, 01:10 AM

A few weeks back, they did a spot on TNN, cant remember which show, be it Trucks, My Classic Car or what ever, but it was very good. I would go to the TNN website and see if they list the segment somewhere. They did door panels and headliners. They even did flames in some. It was really good.

barn9 · 08-25-2003, 01:16 AM

Try these guys.

Hotrod70C10 · 08-25-2003, 02:40 AM

gracias amigos.

Tuck · 08-25-2003, 09:11 AM

rod Doors sells the foam bowtie ready to recover over. they have two sizes.

adamls · 08-25-2003, 11:19 AM

Rod Doors is probably the best, have all kinds of designs for door and headliners to match. Just a plastic piece that gets covered with cloth. Any design can be cut from foam and installed under the cloth. The plastic piece is then attached to the truck. I think some of there pieces allready have some designs or you can get a plain piece and install your own design.

Hotrod70C10 · 08-26-2003, 12:34 AM

Thanks guys, I ended up stopping by a shop nearby. They had everything I was looking for. Thanks for the help though!

08-24-2003, 11:17 PM	#1
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	I need some info on upolstery... I'm getting ready to cover my door panels in my 70. I'm looking for somewhere I can purchase the different foams to make designs. I'm really not going to need much though, I'm only putting a bowtie under the armrests on each door. Thanks in advance. Billy __________________ 70' C-10 LWB Fleetside 4.5/6 drop

08-25-2003, 01:16 AM	#3
barn9 Half a bubble off! Join Date: Jun 2000 Location: Winfield, Ks, USA Posts: 5,588	Try these guys. __________________ Just call me LB. '71 Cheyenne, 402BB, hauls blondes, brunettes, or redheads.

08-25-2003, 02:40 AM	#4
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	gracias amigos. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

08-25-2003, 11:19 AM	#6
adamls Gotta Startem Early Join Date: Oct 2001 Location: Amarillo, TX, USA Posts: 364	Rod Doors is probably the best, have all kinds of designs for door and headliners to match. Just a plastic piece that gets covered with cloth. Any design can be cut from foam and installed under the cloth. The plastic piece is then attached to the truck. I think some of there pieces allready have some designs or you can get a plain piece and install your own design. __________________ 67 SWB In Progress, one piece at a time, maybe 3 years I will be finished

08-26-2003, 12:34 AM	#7
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	Thanks guys, I ended up stopping by a shop nearby. They had everything I was looking for. Thanks for the help though! __________________ 70' C-10 LWB Fleetside 4.5/6 drop

08-25-2003, 01:10 AM	#2
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	A few weeks back, they did a spot on TNN, cant remember which show, be it Trucks, My Classic Car or what ever, but it was very good. I would go to the TNN website and see if they list the segment somewhere. They did door panels and headliners. They even did flames in some. It was really good.

08-25-2003, 09:11 AM	#5
Tuck Registered User Join Date: Aug 2001 Location: pell city,AL Posts: 263	rod Doors sells the foam bowtie ready to recover over. they have two sizes.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.