1970 C-10 Build Sheet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TripleNickel · 11-26-2011, 10:53 PM

I guess there is one good thing about POs not choosing to use the vacuum at the local car wash...

It allows folks like me to find most of the build sheet laying on the floor, under the passenger side of the seat.

Although I've never been fortunate enough to find one of these in my previous vehicles (but will be checking the seat in my 3 owner 1970 C-20 tomorrow) I did recognize what this was from the first piece I found as I cleaned up today, and was very careful to not damage the remaining 5 or so pieces as I gathered them up as well.

As I count the numbered boxes, what I have found is about 9 sections wide. It appears from the counts that the build sheets are about 18 sections wide.

For those who have handled these before, am I really missing about 1/2 of the build sheet?

11-26-2011, 10:53 PM	#1
TripleNickel Registered User Join Date: May 2010 Location: Akron, Ohio Posts: 154	1970 C-10 Build Sheet I guess there is one good thing about POs not choosing to use the vacuum at the local car wash... It allows folks like me to find most of the build sheet laying on the floor, under the passenger side of the seat. Although I've never been fortunate enough to find one of these in my previous vehicles (but will be checking the seat in my 3 owner 1970 C-20 tomorrow) I did recognize what this was from the first piece I found as I cleaned up today, and was very careful to not damage the remaining 5 or so pieces as I gathered them up as well. As I count the numbered boxes, what I have found is about 9 sections wide. It appears from the counts that the build sheets are about 18 sections wide. For those who have handled these before, am I really missing about 1/2 of the build sheet?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.