not new to the board or trucks.But new to 4wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c-tenkid · 11-28-2011, 12:37 AM

I own a 69 chevy c-10 lwb truck.Good shape and a great old truck to cruise around town or down the backroads.

But two sundays ago I came across a 69 chevy K-10 truck with a 4inch suspension lift.I bought it.Tore the old body off the 4wd chasiss cleaned it up and than today took my 2wd body and set it on the 4wd frame.

What I am needing to know is if there is special body mounts needed to put a 2wd body on 4wd frame.

Thanks.Try to get some pics up after I wash her.

Chevy1TonFun · 11-29-2011, 12:24 AM

Nope, its all the same mounts.

Your41Plague12 · 11-29-2011, 12:01 PM

Body mounts are all the same. Swap the tranny tunnel and you should be good to go!

Gene · 11-29-2011, 04:03 PM

I thought 2wd mounts were different? Seems like 4wd and 3/4 ton 2wd are the same?

c-tenkid · 11-29-2011, 07:45 PM

Thanks for the replies guys.The problem I am having is the driver side rear cab corner is about 2 inches lower than the bed.The passenger side is fine.But the driver side is outta wack.

I looked on ECE's website and noticed that there is a 4wd body mount set and 2wd.As well as differences between 1/2 ton and 3/4 ton.
I am going to call ECE this week and talk to them about it.the

Nothing on the frame appears bent or tweaked.And the body I took off sat well on the frame.

By the time I get home from work I got about a half hour before its dark and the truck is outside.So not alot of time to work on it during the week.

Thanks again for the help.Hopefully there is a simply solution!

msgross · 11-29-2011, 07:52 PM

LMC truck has the proper rubber mounts...

11-28-2011, 12:37 AM	#1
c-tenkid Registered User Join Date: Apr 2003 Location: Festus mo Posts: 370	not new to the board or trucks.But new to 4wd I own a 69 chevy c-10 lwb truck.Good shape and a great old truck to cruise around town or down the backroads. But two sundays ago I came across a 69 chevy K-10 truck with a 4inch suspension lift.I bought it.Tore the old body off the 4wd chasiss cleaned it up and than today took my 2wd body and set it on the 4wd frame. What I am needing to know is if there is special body mounts needed to put a 2wd body on 4wd frame. Thanks.Try to get some pics up after I wash her. __________________ 69 c-10 lwb,Converted to 4x4,dana 44f,12blt,4 inch lift,vortec headed 355,th350/np203 34x10.50x15 swamper tsl's

11-29-2011, 12:24 AM	#2
Chevy1TonFun Grease Monkey Join Date: Oct 2007 Location: Fresno CA Posts: 750	Re: not new to the board or trucks.But new to 4wd Nope, its all the same mounts. __________________ Tow Rig: 2012 Chevy 2500HD CCSB LTZ Z71 4x4 Duramax Ultimate Offroad Build: 1978 Chevy Silverado K30 Crewcab Build Link http://67-72chevytrucks.com/vboard/s...d.php?t=654053 Mud Truck: 1972 Chevy Cheyenne K30 4x4, 468/400/205, D60/D70HD, 18" Custom Lift, 17x39" IROKs FOR SALE http://67-72chevytrucks.com/vboard/c...ton-4x4&cat=12

11-29-2011, 12:01 PM	#3
Your41Plague12 Registered User Join Date: Dec 2010 Location: Pittsburgh, PA Posts: 1,009	Re: not new to the board or trucks.But new to 4wd Body mounts are all the same. Swap the tranny tunnel and you should be good to go! __________________ Steve Member of the Foot Pedal Club '83 Chevy K20: 6" Rough Country, 3" Performance Accessories BL, Bushwacker Cutouts, 38x15.50 Mickey Thompson Baja Claws, 350 HP 350 crate engine from Jegs, Turbo 400

11-29-2011, 04:03 PM	#4
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: not new to the board or trucks.But new to 4wd I thought 2wd mounts were different? Seems like 4wd and 3/4 ton 2wd are the same? __________________ 1971 SWB 4X4 Build BOARD MEMBER #5448 BOOMER SOONER!!!!

11-29-2011, 07:45 PM	#5
c-tenkid Registered User Join Date: Apr 2003 Location: Festus mo Posts: 370	Re: not new to the board or trucks.But new to 4wd Thanks for the replies guys.The problem I am having is the driver side rear cab corner is about 2 inches lower than the bed.The passenger side is fine.But the driver side is outta wack. I looked on ECE's website and noticed that there is a 4wd body mount set and 2wd.As well as differences between 1/2 ton and 3/4 ton. I am going to call ECE this week and talk to them about it.the Nothing on the frame appears bent or tweaked.And the body I took off sat well on the frame. By the time I get home from work I got about a half hour before its dark and the truck is outside.So not alot of time to work on it during the week. Thanks again for the help.Hopefully there is a simply solution! __________________ 69 c-10 lwb,Converted to 4x4,dana 44f,12blt,4 inch lift,vortec headed 355,th350/np203 34x10.50x15 swamper tsl's

11-29-2011, 07:52 PM	#6
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: not new to the board or trucks.But new to 4wd LMC truck has the proper rubber mounts... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.