Rebuilding 5 slot ralleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kmfb · 11-10-2011, 03:10 PM

Well I picked up some 8" and 10" ralleys with some good BFG Radial T/A's. The wheels have some repop center caps and aluminum trim rings. They are powder coated the bright silver but spray painted white on the outside. I yanked the tires off and cleaned them up. Plans are to blast and re-powdercoat the wheels a gun metal grey instead of silver, smaller trim rings and rebuild and repaint the center caps. OEM ones are just to hard to find and too expensive to buy. On to some pics. These are just from this morning after work.

More pics when I get them coated and start working on the caps.

Pop's C-10 · 11-10-2011, 06:49 PM

Are they 5x5 re-pops

VA72C10 · 11-10-2011, 06:57 PM

those will look good! I like RWL tires on our trucks....especially those BFG's

jchav62 · 11-10-2011, 07:02 PM

Rally's with T/A's... That's are hard combination to beat.. Nice!

Smoke_Dog · 11-10-2011, 07:25 PM

Didn't know that U could get 15x10's

SCOTI · 11-10-2011, 08:37 PM

Quote:

Originally Posted by Smoke_Dog

Didn't know that U could get 15x10's

They're custom width (aftermarket).

kmfb · 11-10-2011, 10:01 PM

Thanks for the compliments guys! Do you think gun metal would look good on the 5 slot ralleys?
Posted via Mobile Device

notyo_cheez · 11-10-2011, 10:28 PM

Argent silver.

lilpoindexter · 11-10-2011, 10:35 PM

Dude, one of those tires shows some decent dry rot on the side.

kmfb · 11-10-2011, 10:46 PM

I showed my tire guy that rot and he said it was because someone rolled it once or twice while flat. We inspected the inside sidewall and he said it wouldn't concern him much. It might be a while before I roll these and might replace the rears.
Posted via Mobile Device

kmfb · 11-12-2011, 02:31 AM

Well I dropped off the rims at the powder coating shop, chose a black chrome color. Looks like a metallic gun metal grey. Stopped by So-Cal speed shop and picked up my skinny stainless steel trim rings. Next is to restore the centers. Pics soon to follow!
Posted via Mobile Device

Gordonr1973 · 11-12-2011, 08:09 PM

Sounds like it will look good!!

kmfb · 11-28-2011, 10:23 PM

Well I had the wheels powder coated and im happy with the color. Turned out a bit darker on the wheel than the sample but im still happy. I mocked up one of the 8's to get a feel for the "chromed" cap and new trim rings. I basically soaked the caps in solvent and lightly scrubbed them with some 4 aught gauge steel wool. I had the guy powdercoat the back side of the rim a flat black to save him on some color. On to some pics!

grayharville · 11-29-2011, 11:29 PM

Im interested to see the front/rear tires remounted and side by side for comparison. I plan on running a 275/60 on 8 in rallys rear on my swb with a set of 6.5s up front, but I am undecided on front tire size. any help would be great. thanks

Skellington · 11-29-2011, 11:41 PM

Looks nice! Cant wait to see them with some rubbers and mounted up.

kmfb · 11-30-2011, 09:07 AM

Yeah im gettin excited to put some rubber on now! I can't decide if I want white walls or keep the white letters out.
Posted via Mobile Device

franky69c10 · 11-30-2011, 07:57 PM

they came out good bro
Posted via Mobile Device

11-10-2011, 03:10 PM	#1
kmfb Registered User Join Date: Sep 2011 Location: Clackamas, Or Posts: 139	Rebuilding 5 slot ralleys Well I picked up some 8" and 10" ralleys with some good BFG Radial T/A's. The wheels have some repop center caps and aluminum trim rings. They are powder coated the bright silver but spray painted white on the outside. I yanked the tires off and cleaned them up. Plans are to blast and re-powdercoat the wheels a gun metal grey instead of silver, smaller trim rings and rebuild and repaint the center caps. OEM ones are just to hard to find and too expensive to buy. On to some pics. These are just from this morning after work. More pics when I get them coated and start working on the caps.

11-10-2011, 06:49 PM	#2
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Rebuilding 5 slot ralleys Are they 5x5 re-pops __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

11-10-2011, 06:57 PM	#3
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Rebuilding 5 slot ralleys those will look good! I like RWL tires on our trucks....especially those BFG's __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-10-2011, 07:02 PM	#4
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Rebuilding 5 slot ralleys Rally's with T/A's... That's are hard combination to beat.. Nice! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

11-10-2011, 07:25 PM	#5
Smoke_Dog Registered User Join Date: Feb 2008 Location: Hickory, NC native, but stuck in Valdosta, Ga Posts: 615	Re: Rebuilding 5 slot ralleys Didn't know that U could get 15x10's

11-10-2011, 10:01 PM	#7
kmfb Registered User Join Date: Sep 2011 Location: Clackamas, Or Posts: 139	Re: Rebuilding 5 slot ralleys Thanks for the compliments guys! Do you think gun metal would look good on the 5 slot ralleys? Posted via Mobile Device

11-10-2011, 10:28 PM	#8
notyo_cheez Registered User Join Date: Apr 2011 Location: corpus christi, tx - america's fattest city Posts: 253	Re: Rebuilding 5 slot ralleys Argent silver.

11-10-2011, 10:35 PM	#9
lilpoindexter Registered User Join Date: Sep 2010 Location: los angeles Posts: 1,134	Re: Rebuilding 5 slot ralleys Dude, one of those tires shows some decent dry rot on the side.

11-10-2011, 10:46 PM	#10
kmfb Registered User Join Date: Sep 2011 Location: Clackamas, Or Posts: 139	Re: Rebuilding 5 slot ralleys I showed my tire guy that rot and he said it was because someone rolled it once or twice while flat. We inspected the inside sidewall and he said it wouldn't concern him much. It might be a while before I roll these and might replace the rears. Posted via Mobile Device

11-12-2011, 02:31 AM	#11
kmfb Registered User Join Date: Sep 2011 Location: Clackamas, Or Posts: 139	Re: Rebuilding 5 slot ralleys Well I dropped off the rims at the powder coating shop, chose a black chrome color. Looks like a metallic gun metal grey. Stopped by So-Cal speed shop and picked up my skinny stainless steel trim rings. Next is to restore the centers. Pics soon to follow! Posted via Mobile Device

11-12-2011, 08:09 PM	#12
Gordonr1973 Home Built '87 Join Date: May 2010 Location: Calgary, Alberta Canada Posts: 1,829	Re: Rebuilding 5 slot ralleys Sounds like it will look good!! __________________ Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969

11-28-2011, 10:23 PM	#13
kmfb Registered User Join Date: Sep 2011 Location: Clackamas, Or Posts: 139	Re: Rebuilding 5 slot ralleys Well I had the wheels powder coated and im happy with the color. Turned out a bit darker on the wheel than the sample but im still happy. I mocked up one of the 8's to get a feel for the "chromed" cap and new trim rings. I basically soaked the caps in solvent and lightly scrubbed them with some 4 aught gauge steel wool. I had the guy powdercoat the back side of the rim a flat black to save him on some color. On to some pics!

11-29-2011, 11:29 PM	#14
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: Rebuilding 5 slot ralleys Im interested to see the front/rear tires remounted and side by side for comparison. I plan on running a 275/60 on 8 in rallys rear on my swb with a set of 6.5s up front, but I am undecided on front tire size. any help would be great. thanks __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

11-29-2011, 11:41 PM	#15
Skellington Registered User Join Date: Aug 2011 Location: California Posts: 53	Re: Rebuilding 5 slot ralleys Looks nice! Cant wait to see them with some rubbers and mounted up.

11-30-2011, 09:07 AM	#16
kmfb Registered User Join Date: Sep 2011 Location: Clackamas, Or Posts: 139	Re: Rebuilding 5 slot ralleys Yeah im gettin excited to put some rubber on now! I can't decide if I want white walls or keep the white letters out. Posted via Mobile Device



Register or Log In To remove these advertisements.

11-30-2011, 07:57 PM	#17
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Rebuilding 5 slot ralleys they came out good bro Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

Register or Log In To remove these advertisements.