rear window seal trimcorners - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stepper86 · 12-04-2011, 05:18 PM

Hi guys.
I took out my rear window today, it´s a slider. Replaced all the seals exept for the main one, the old one was in good condition and I could not get a new one around here so I figured it would have to do.
Everything went fine until I was to put the little chromed alu corners in at the bottom corners of the lockstrip.
The lock strip I bought came with the center joint only, so I had to reuse the old ones. I ended up bending them to S...

Finaly got them in, but it looks bad. Any one know where I can buy new ones? I searched every where, maybe it´s just me being frustrated but I can´t find any.
And any good tips about how to get them in with out damage would be very much appriciated!

J Knight · 12-04-2011, 07:43 PM

The new trim comes with new corner pieces.http://www.lmctruck.com/icatalog/cc/full.aspx?Page=13

Stepper86 · 12-05-2011, 02:41 AM

Mine did not, it came with the center joint type. Like what´s on the windshield trim, maybe it´s for a solid back window?
To bad it´s from LMC, I do not like buying from them the shipping costs a fortune every time. But thanks for the tip, at least now I know I can get them!

J Knight · 12-05-2011, 08:32 AM

The center joint is for the windshield only.
Posted via Mobile Device

12-04-2011, 05:18 PM	#1
Stepper86 Registered User Join Date: Sep 2011 Location: Stockholm Posts: 263	rear window seal trimcorners Hi guys. I took out my rear window today, it´s a slider. Replaced all the seals exept for the main one, the old one was in good condition and I could not get a new one around here so I figured it would have to do. Everything went fine until I was to put the little chromed alu corners in at the bottom corners of the lockstrip. The lock strip I bought came with the center joint only, so I had to reuse the old ones. I ended up bending them to S... Finaly got them in, but it looks bad. Any one know where I can buy new ones? I searched every where, maybe it´s just me being frustrated but I can´t find any. And any good tips about how to get them in with out damage would be very much appriciated! __________________ Tom.______________________________________ The fleet: 2007 BMW 530xi M (daily driver) 1986 C-10 Stepside (project "my time") 1992 Corvette cab (summer time daily driver) 1969 Cadilac DeVille Cab ("it just need some paint")

12-04-2011, 07:43 PM	#2
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: rear window seal trimcorners The new trim comes with new corner pieces.http://www.lmctruck.com/icatalog/cc/full.aspx?Page=13 __________________ John 82 Chevy Silverado 350ci/TH350

12-05-2011, 02:41 AM	#3
Stepper86 Registered User Join Date: Sep 2011 Location: Stockholm Posts: 263	Re: rear window seal trimcorners Mine did not, it came with the center joint type. Like what´s on the windshield trim, maybe it´s for a solid back window? To bad it´s from LMC, I do not like buying from them the shipping costs a fortune every time. But thanks for the tip, at least now I know I can get them! __________________ Tom.______________________________________ The fleet: 2007 BMW 530xi M (daily driver) 1986 C-10 Stepside (project "my time") 1992 Corvette cab (summer time daily driver) 1969 Cadilac DeVille Cab ("it just need some paint")

12-05-2011, 08:32 AM	#4
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: rear window seal trimcorners The center joint is for the windshield only. Posted via Mobile Device __________________ John 82 Chevy Silverado 350ci/TH350



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.