OR 100's of misc parts from the last 6 trucks parted out - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 10-11-2011, 11:22 AM

Just back from a 13 day hunting trip.

Racinaround, PM sent.

Joe Blaze, 75.00 on all 4 door hindges. They are acid dipped then media blasted and ready for paint. Thanks

thohill, Yes I do, I have a couple that are pretty nice. I will have to look at them to determine quality and cost will do so this evening. Thanks

19Hoosierdaddies68 · 11-20-2011, 05:21 AM

I will take these if all the mounts are there "2 67-68 chev 20 8.00 each". Shipped to 92880? PM me payment info.

Also interested in a 67-68 steering wheel depending on condition, color etc.?

Thanks,

Jerry

**tll74** · 11-23-2011, 12:20 AM

Quote:

Originally Posted by 19Hoosierdaddies68

I will take these if all the mounts are there "2 67-68 chev 20 8.00 each". Shipped to 92880? PM me payment info.

Also interested in a 67-68 steering wheel depending on condition, color etc.?

Thanks,

Jerry

PM sent.
Yes the studs are good. I do have a steering wheel. If I remember correctly it is blue. It does have restorable cracks where all three spokes meet the center hub. 75.00 plus shipping.
Thanks, Tom

Delta9 · 11-23-2011, 02:22 AM

do u still have the glove box without the emblem? Does it have any holes? does it have keyless push button, and does it have stopper? If so i am very interested.

skrenly · 11-23-2011, 02:43 AM

Hello,
I'm in Eugene. I'm interested in the sierra grande bed emblems.

**tll74** · 11-23-2011, 11:40 PM

Quote:

Originally Posted by skrenly

Hello,
I'm in Eugene. I'm interested in the sierra grande bed emblems.

Just give me a call and we could hook up. 541-521-1307 Thanks, Tom

**tll74** · 11-23-2011, 11:49 PM

Quote:

Originally Posted by Delta9

do u still have the glove box without the emblem? Does it have any holes? does it have keyless push button, and does it have stopper? If so i am very interested.

Yes, no, yes, and yes. Thanks Tom

brickren · 11-24-2011, 08:25 AM

Hello. I have a '68 K 20. I need a left inner and outer fender, core support, front and fear emergency brake cables and an ash tray assy. Any of these parts available? Shipped to Meadville,Pa. 16335, Thanks, Brian 814-434-2984

Delta9 · 11-26-2011, 12:09 AM

im still interested in the glovebox PM me with price and paypal info. shipped to 42223

Delta9 · 11-27-2011, 12:12 AM

payment sent

DARIO1 · 12-06-2011, 10:22 PM

If still available I would like the (Pic 8), firewall side heater housing faded but in excellent cond. 35.00 plus shipping. PM me for payment arrangement and cost to 04106 please. Thanks.

slikside · 12-06-2011, 11:40 PM

I'll take the white side mirrors in pic 2 if still available. Haven't read the whole thread yet. Shipping to 92071. PM me payment info if still available.

Steve

**tll74** · 12-08-2011, 02:37 AM

Quote:

Originally Posted by DARIO1

If still available I would like the (Pic 8), firewall side heater housing faded but in excellent cond. 35.00 plus shipping. PM me for payment arrangement and cost to 04106 please. Thanks.

Pm sent

Quote:

Originally Posted by slikside

I'll take the white side mirrors in pic 2 if still available. Haven't read the whole thread yet. Shipping to 92071. PM me payment info if still available.

Steve

Pm sent

1969blazer · 12-08-2011, 03:10 AM

Hi.
Do you have the brackets that attach the top to the bed on a first gen blazer, and rear hatch strikers?
Thanks.
Greg

**tll74** · 12-08-2011, 05:38 PM

Quote:

Originally Posted by 1969blazer

Hi.
Do you have the brackets that attach the top to the bed on a first gen blazer, and rear hatch strikers?
Thanks.
Greg

Are the brackets you need the same as the white ones in post #4 picture #1? I should have the strikers on a complete 72 k5 Jimmy not yet parted out. I'll check this evening. Thanks Tom

72GMCK-2500 · 12-08-2011, 05:43 PM

Are 2 of the GMC 2500 V-EIGHT side fender emblems still available? i need both. How much for both shipped to 19382? Thanks, Andrew.

1969blazer · 12-09-2011, 01:10 AM

Hi Tom.
Yes they look like the correct brackets from what I can tell. But I'm not sure.
Let me know on the strikers too. If you have them I'll buy em.
Thanks Greg

**tll74** · 12-09-2011, 01:45 AM

Quote:

Originally Posted by 1969blazer

Hi Tom.
Yes they look like the correct brackets from what I can tell. But I'm not sure.
Let me know on the strikers too. If you have them I'll buy em.
Thanks Greg

Greg, I just checked for the strickers and it only has one. There may be one in the zip lock plastic bag in the picture. I will check in the morning as it is not here at home.
Thanks, Tom

1969blazer · 12-09-2011, 01:49 AM

Thanks Tom.
Let me know.
Greg

Collin · 12-09-2011, 02:13 AM

Tom, Do you have factory window cranks? Or re-pops? I need a pair (not from Taiwan) shipped to 89012...

Let me know! Thanks,
Collin

slikside · 12-09-2011, 02:20 AM

Hi Tom, check your PM's when you can.

72blazr · 12-09-2011, 02:38 AM

Are the blazer rear gate supports still available in pic 5? If they are I will take them.

**tll74** · 12-09-2011, 02:43 AM

Quote:

Originally Posted by 1969blazer

Thanks Tom.
Let me know.
Greg

will do

Quote:

Originally Posted by 72GMCK-2500

Are 2 of the GMC 2500 V-EIGHT side fender emblems still available? i need both. How much for both shipped to 19382? Thanks, Andrew.

PM sent

Quote:

Originally Posted by Collin

Tom, Do you have factory window cranks? Or re-pops? I need a pair (not from Taiwan) shipped to 89012...

Let me know! Thanks,
Collin

These and more from 20 trucks yet to be parted are the original GM's.

Quote:

Originally Posted by slikside

Hi Tom, check your PM's when you can.

PM sent

**tll74** · 12-09-2011, 02:45 AM

Quote:

Originally Posted by 72blazr

Are the blazer rear gate supports still available in pic 5? If they are I will take them.

Yes sir they are!

72blazr · 12-09-2011, 03:14 AM

Just sent a pm. I am also needing the brackets that hold down the front of the rear seat in a blazer. Let me know what you have. Thanks

10-11-2011, 11:22 AM	#176
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 100's of misc parts from the last 6 trucks parted out Just back from a 13 day hunting trip. Racinaround, PM sent. Joe Blaze, 75.00 on all 4 door hindges. They are acid dipped then media blasted and ready for paint. Thanks thohill, Yes I do, I have a couple that are pretty nice. I will have to look at them to determine quality and cost will do so this evening. Thanks __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

11-20-2011, 05:21 AM	#177
19Hoosierdaddies68 Registered User Join Date: Feb 2010 Location: Eastvale, CA Posts: 82	Re: 100's of misc parts from the last 6 trucks parted out I will take these if all the mounts are there "2 67-68 chev 20 8.00 each". Shipped to 92880? PM me payment info. Also interested in a 67-68 steering wheel depending on condition, color etc.? Thanks, Jerry

11-23-2011, 02:22 AM	#179
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: 100's of misc parts from the last 6 trucks parted out do u still have the glove box without the emblem? Does it have any holes? does it have keyless push button, and does it have stopper? If so i am very interested.

11-23-2011, 02:43 AM	#180
skrenly Registered User Join Date: Feb 2008 Location: Coronado, CA Posts: 1,085	Re: 100's of misc parts from the last 6 trucks parted out Hello, I'm in Eugene. I'm interested in the sierra grande bed emblems.

11-24-2011, 08:25 AM	#183
brickren Registered User Join Date: Nov 2011 Location: Saegertown,Pa. Posts: 28	Re: 100's of misc parts from the last 6 trucks parted out Hello. I have a '68 K 20. I need a left inner and outer fender, core support, front and fear emergency brake cables and an ash tray assy. Any of these parts available? Shipped to Meadville,Pa. 16335, Thanks, Brian 814-434-2984 __________________ 1968 K 20 w/327 4bbl 4 sp

11-26-2011, 12:09 AM	#184
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: 100's of misc parts from the last 6 trucks parted out im still interested in the glovebox PM me with price and paypal info. shipped to 42223

11-27-2011, 12:12 AM	#185
Delta9 Registered User Join Date: Oct 2011 Location: Fort Campbell Posts: 116	Re: 100's of misc parts from the last 6 trucks parted out payment sent

12-06-2011, 10:22 PM	#186
DARIO1 Registered User Join Date: Nov 2011 Location: FL GA line Posts: 161	Re: 100's of misc parts from the last 6 trucks parted out If still available I would like the (Pic 8), firewall side heater housing faded but in excellent cond. 35.00 plus shipping. PM me for payment arrangement and cost to 04106 please. Thanks.

12-06-2011, 11:40 PM	#187
slikside Registered User Join Date: Jun 2010 Location: San Diego Co. Posts: 1,184	Re: 100's of misc parts from the last 6 trucks parted out I'll take the white side mirrors in pic 2 if still available. Haven't read the whole thread yet. Shipping to 92071. PM me payment info if still available. Steve

12-08-2011, 03:10 AM	#189
1969blazer Registered User Join Date: Jun 2011 Location: Sacramento, California Posts: 12	Re: 100's of misc parts from the last 6 trucks parted out Hi. Do you have the brackets that attach the top to the bed on a first gen blazer, and rear hatch strikers? Thanks. Greg

12-08-2011, 05:43 PM	#191
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	Re: 100's of misc parts from the last 6 trucks parted out Are 2 of the GMC 2500 V-EIGHT side fender emblems still available? i need both. How much for both shipped to 19382? Thanks, Andrew. __________________ 1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride) 1965 GMC 1000 305E V6, Powerglide. GONE 1972 GMC K-2500 350, 4 speed, 229,000 miles 1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4. 1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel. RUST NEVER SLEEPS

12-09-2011, 01:10 AM	#192
1969blazer Registered User Join Date: Jun 2011 Location: Sacramento, California Posts: 12	Re: 100's of misc parts from the last 6 trucks parted out Hi Tom. Yes they look like the correct brackets from what I can tell. But I'm not sure. Let me know on the strikers too. If you have them I'll buy em. Thanks Greg

12-09-2011, 01:49 AM	#194
1969blazer Registered User Join Date: Jun 2011 Location: Sacramento, California Posts: 12	Re: 100's of misc parts from the last 6 trucks parted out Thanks Tom. Let me know. Greg

12-09-2011, 02:13 AM	#195
Collin Registered User Join Date: Dec 2011 Location: Las Vegas, NV Posts: 54	Re: 100's of misc parts from the last 6 trucks parted out Tom, Do you have factory window cranks? Or re-pops? I need a pair (not from Taiwan) shipped to 89012... Let me know! Thanks, Collin

12-09-2011, 02:20 AM	#196
slikside Registered User Join Date: Jun 2010 Location: San Diego Co. Posts: 1,184	Re: 100's of misc parts from the last 6 trucks parted out Hi Tom, check your PM's when you can.



Register or Log In To remove these advertisements.

12-09-2011, 02:38 AM	#197
72blazr Registered User Join Date: Nov 2011 Location: Houston Texas Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out Are the blazer rear gate supports still available in pic 5? If they are I will take them.

12-09-2011, 03:14 AM	#200
72blazr Registered User Join Date: Nov 2011 Location: Houston Texas Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out Just sent a pm. I am also needing the brackets that hold down the front of the rear seat in a blazer. Let me know what you have. Thanks

Register or Log In To remove these advertisements.