CA carbs and HEI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heeroyue2002 · 09-18-2011, 06:07 PM

if the items fit in a medium shipping bix, which im sure most of these will. add 11 for shipping.

mallory HEI and a mallory COIL $75 pair!

next is a motorcraft carb manefactured by holley.
motorcraft e3zebgb
a3b24
$20!

qjet
7037219 nd
1182

$35!

heeroyue2002 · 11-15-2011, 08:09 PM

Must go! Make offer. No reasonable refused
Posted via Mobile Device

heeroyue2002 · 11-20-2011, 09:53 PM

ttt

heeroyue2002 · 11-26-2011, 03:42 AM

bump! buy before it gets lost/or stolen in my move/relocation

Bryon.Dillon · 11-26-2011, 04:16 AM

is the HEI for a 6 cyl?

heeroyue2002 · 11-26-2011, 04:38 AM

Im notsure. I believe 8 cyl and its also used on classic vettes
Posted via Mobile Device

Bryon.Dillon · 11-26-2011, 04:44 AM

whats the part no on distributor?

heeroyue2002 · 11-26-2011, 05:06 AM

38645c1
from my research they appear to go
for $400 new not including the coil. Those go for about $80 new
Posted via Mobile Device

Bryon.Dillon · 11-26-2011, 03:49 PM

cant find any info on that model number, or i'd be interested. Not gonna take the risk that it wont fit my engine when i can get a whole hei setup that I know will fit for $150 minus plug wires. Thank you anyways =)

Bryon

heeroyue2002 · 11-26-2011, 08:18 PM

what i found
Mallory #650-3864501
Corvette 1955-74 Tach Drive Distributor

Choose From Mechanical or Vacuum Advance

The Mallory UNILITE Electronic Distributor is triggered by a self-contained, photo-optic infrared L.E.D. system using Mallory's time tested breakerless ignition circuit, combined with modern surface mount Thermal-Clad construction that has no moving parts to adjust or wear out. The UNILITE infrared L.E.D. system can drive both original equipment and high performance ignition coils. A simple three wire hookup allows it to fit a wide variety of engine configurations and is designed for 12-volt systems. Mallory has precisely calibrated the mechanical advance (or vacuum advance) curve for normal driving conditions. However, the mechanical advance curve may be adjusted to meet your specific driving or racing requirements.
FEATURES: Improved combustion efficiency and economy. Increased spark plug life. Improved cold weather starting. Maintenance free operation. Accurate spark timing. Self-lubricating bushings provide years of trouble-free service.

heeroyue2002 · 12-05-2011, 08:06 PM

Ttt
Posted via Mobile Device

heeroyue2002 · 12-13-2011, 08:25 PM

Buy
Posted via Mobile Device

09-18-2011, 06:07 PM	#1
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	carbs and HEI if the items fit in a medium shipping bix, which im sure most of these will. add 11 for shipping. mallory HEI and a mallory COIL $75 pair! next is a motorcraft carb manefactured by holley. motorcraft e3zebgb a3b24 $20! qjet 7037219 nd 1182 $35! __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-15-2011, 08:09 PM	#2
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI Must go! Make offer. No reasonable refused Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-20-2011, 09:53 PM	#3
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI ttt __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-26-2011, 03:42 AM	#4
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI bump! buy before it gets lost/or stolen in my move/relocation __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-26-2011, 04:16 AM	#5
Bryon.Dillon Registered User Join Date: Nov 2011 Location: Bonney Lake, WA Posts: 43	Re: carbs and HEI is the HEI for a 6 cyl?

11-26-2011, 04:38 AM	#6
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI Im notsure. I believe 8 cyl and its also used on classic vettes Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-26-2011, 04:44 AM	#7
Bryon.Dillon Registered User Join Date: Nov 2011 Location: Bonney Lake, WA Posts: 43	Re: carbs and HEI whats the part no on distributor?

11-26-2011, 05:06 AM	#8
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI 38645c1 from my research they appear to go for $400 new not including the coil. Those go for about $80 new Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

11-26-2011, 03:49 PM	#9
Bryon.Dillon Registered User Join Date: Nov 2011 Location: Bonney Lake, WA Posts: 43	Re: carbs and HEI cant find any info on that model number, or i'd be interested. Not gonna take the risk that it wont fit my engine when i can get a whole hei setup that I know will fit for $150 minus plug wires. Thank you anyways =) Bryon

11-26-2011, 08:18 PM	#10
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI what i found Mallory #650-3864501 Corvette 1955-74 Tach Drive Distributor Choose From Mechanical or Vacuum Advance The Mallory UNILITE Electronic Distributor is triggered by a self-contained, photo-optic infrared L.E.D. system using Mallory's time tested breakerless ignition circuit, combined with modern surface mount Thermal-Clad construction that has no moving parts to adjust or wear out. The UNILITE infrared L.E.D. system can drive both original equipment and high performance ignition coils. A simple three wire hookup allows it to fit a wide variety of engine configurations and is designed for 12-volt systems. Mallory has precisely calibrated the mechanical advance (or vacuum advance) curve for normal driving conditions. However, the mechanical advance curve may be adjusted to meet your specific driving or racing requirements. FEATURES: Improved combustion efficiency and economy. Increased spark plug life. Improved cold weather starting. Maintenance free operation. Accurate spark timing. Self-lubricating bushings provide years of trouble-free service. __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

12-05-2011, 08:06 PM	#11
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI Ttt Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

12-13-2011, 08:25 PM	#12
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: carbs and HEI Buy Posted via Mobile Device __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.